Spring Mounts Categories
Category Matches
Spring Mounts
TopHide PicturesSprings - Neoprene
Search Rating: 100%
Also see combined categories:
All Rubber Springs
Neoprene elastomer springs have proven to be the safest, most efficient material for punching, stamping and drawing dies.
Major advantages include high loads, increased durability, better performance, no maintenance and long life.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Springs - Neoprene.
Springs - Urethane
Search Rating: 100%
Also see combined categories:
All Rubber Springs
Urethane springs are designed for use in applications where corrosion, vibration or magnetism prevent the use of conventional steel springs.
They replace steel coil springs in medium pressure applications involving space limitations, high blank holding pressure and adequate stripping. Durometer 95 shore A. Colour black. Tensile strength 5000 psi. Temperature range minus 40 to 80 oC.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Springs - Urethane.
Springs Constant Force
TopHide PicturesSprings - Constant Force
Search Rating: 71%
301 Stainless Steel
Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Springs - Constant Force.
Latches Other
TopHide PicturesLatches - Spring Loaded
Search Rating: 68%
Steel construction with either black enamel or chrome finish. 90o or straight mounting options. Keeper included.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Spring Loaded.
Latches Paddle
TopHide PicturesLatches - Paddle - Flush - Miniature - 304 Stainless
Search Rating: 67%
Flush mounting. Slide is plastic. Spring loaded paddle won't rattle. Smooth push to close latching. Quick one screw mounting. Max load 8.9kg.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Paddle - Flush - Miniature - 304 Stainless.
Plungers Indexing
TopHide PicturesPlungers - Indexing - Locking - With Mounting Plate - Steel
Search Rating: 66%
Also see combined categories:
All Indexing Plungers
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Locking - With Mounting Plate - Steel.
Plungers - Indexing - Non Locking - With Mounting Plate - Steel
Search Rating: 66%
Also see combined categories:
All Indexing Plungers
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Non Locking - With Mounting Plate - Steel.
Latches Draw
TopHide PicturesLatches - Draw - Rotary Action - Link Lock
Search Rating: 57%
Draws panels together with overcentre clamping force and slide travel of 11.9mm. Simply lift wing and twist to disengage. Available with spring loaded option for mounting hole irregularities or shock and vibration.
Type 300 stainless steel or steel with black UV resistant powder coat. Working load for stainless is 84kg. Working load for steel is 120kg. Keepers not included and must be purchased separately.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Draw - Rotary Action - Link Lock.
Latches Pull
TopHide PicturesLatches - Pull - Flush - Locking
Search Rating: 56%
Low profile. Corrosion resistant. Simple 50.8mm (2 in.) round hole installation. Mounts in panels up to 22.2mm thick. M5 philips pan head mounting screws. Includes tab for inside actuation.
Max working load 26kg. Ultimate load 53kg. Black polycarbonate with stainless spring, keeper and screws.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Pull - Flush - Locking.
Latches Other
TopHide PicturesLatches - Snap Slide
Search Rating: 55%
Used for attaching subplates and assemblies. The sliding bar is attached to the removable panel and the post is mounted to the stationary support.
In the closed position the spring action of the bar resists opening under vibration and shock load. The removable panel thickness must be between 1.2 and 4.0mm. Spacers may be needed and are included with each latch. The post can be attached with rivets, screw and nut or wood screw. Each comes with post and bar assembly. Made from zinc plated steel with chromate finish.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Snap Slide.
Latches Pull
TopHide PicturesLatches - Pull - Flush - Non Locking
Search Rating: 55%
Low profile. Corrosion resistant. Simple 50.8mm (2 in.) round hole installation. Mounts in panels up to 22.2mm thick. M5 philips pan head mounting screws. Includes tab for inside actuation.
Max working load 26kg. Ultimate load 53kg. Black polycarbonate with stainless spring, keeper and screws.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Pull - Flush - Non Locking.
Bumpers
TopHide PicturesBumpers - Elastomer - Medium Energy Absorption - Low Reaction Force
Search Rating: 49%
Also see combined categories:
All Elastomer Bumpers
Elastomer bumpers provide excellent resistance to chemicals and humidity. 20 times greater durability than urethane.
10 greater durability than rubber and 500 times greater than steel coiled springs. Maintains excellent resilience at extreme temperatures and remains flexible with no material degradation between -62 oC and +148 Deg C (-80 Deg F and +300 Deg F). Mounting screws not included.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bumpers - Elastomer - Medium Energy Absorption - Low Reaction Force.
Bumpers - Elastomer - High Energy Absorption - Compact Size - Short Stroke
Search Rating: 49%
Also see combined categories:
All Elastomer Bumpers
Elastomer bumpers provide excellent resistance to chemicals and humidity. 20 times greater durability than urethane.
10 greater durability than rubber and 500 times greater than steel coiled springs. Maintains excellent resilience at extreme temperatures and remains flexible with no material degradation between -62 oC and +148 Deg C (-80 Deg F and +300 Deg F). Mounting screws not included.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bumpers - Elastomer - High Energy Absorption - Compact Size - Short Stroke.
Bumpers - Elastomer - Low Energy Absorption - Longer Stroke - Soft Stop
Search Rating: 49%
Also see combined categories:
All Elastomer Bumpers
Elastomer bumpers provide excellent resistance to chemicals and humidity. 20 times greater durability than urethane.
10 greater durability than rubber and 500 times greater than steel coiled springs. Maintains excellent resilience at extreme temperatures and remains flexible with no material degradation between -62 oC and +148 Deg C (-80 Deg F and +300 Deg F). Mounting screws not included.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bumpers - Elastomer - Low Energy Absorption - Longer Stroke - Soft Stop.
Latches Push
TopHide PicturesLatches - Push to Close
Search Rating: 40%
Knob stores flush and pops out at a touch. Turn the knob to open and push to close. Latches securely with knob in or out.
Accomodates misalignment. Use on flush, surface mount or perpendicular doors. Quick 31.8mm Diameter round hole installation. Polycarbonate / ABS blended material with glass filled black nylon keepers, nut and pawl. Corrosion and UV resistant. Chrome plated with 304 stainless steel internal springs. Max working load 22kg. Available with serrated pawl for self adjusting grip or regular pawl for fixed grip. Keepers included. Keeper for fixed grip is stainless steel.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Push to Close.
Other Store Pages
Click Page Banner Below
TopMain Pages
Click Page Banner Below
TopTop