Categories that include the term: SHAFT
|
Adjustable Linear Bearings  |
Bearings - Linear - Ball
Adjustable and fixed types - open for running on a supported rail and closed for fixed shafts.
|
Assemblies - Locking |
Assemblies - Locking - Flanged
Suitable for locking sprockets, pulleys, eccentric shafts.
Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.
|
Assemblies - Locking - Unflanged
Suitable for locking sprockets, pulleys, eccentric shafts.
Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.
|
Assortments |
Assortments - Various
Springs - O-Rings - Shafting - Circlips - Gears.
|
Ball Bushings - Thomson |
Bearings - Linear - Ball - Thomson Precision Steel (Closed)
For running on shafts fixed at the ends.
|
Bearings - Linear - Ball - Thomson Precision Steel (Open)
For running on shafts supported by a rail along their length.
|
Bearings - Linear - Ball - Thomson Super (Closed)
For running on shafts fixed at the ends.
|
Bearings - Linear - Ball - Thomson Super (Open)
For running on shafts supported by a rail along their length.
|
Bearings - Linear - Ball - Thomson Super Smart (Closed)
For running on shafts fixed at the ends.
|
Bearings - Linear - Ball - Thomson Super Smart (Open)
For running on shafts supported by a rail along their length.
|
Bar |
Shafting - Ground
Ground shafting. Various materials.
|
Shafting - Pipe - AISI52100 Steel
|
Bearings - Idler Rollers |
Rollers - Idler - Ribbed - With Shaft
|
Rollers - Idler - Solid - With Shaft
|
Rollers - Idler - Without Shaft
|
Bushings - Splined |
Splined Bushes - Unflanged
Match with same size External splined shafts.
|
Splined Shafts
Match with same size internal splined bushes.
|
Bushings - Stroke Rotary |
Bushings - Stroke Rotary - Miniature
2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.
Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100°C (Constant), +120°C (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.
|
Clamp Style Shaft Collars |
Collars - Shaft - Clamp Type
|
Clamps - Shaft |
Clamps - Shaft
Mild Steel: 045M10. Stainless Steel: 303S21.
|
Clutch Couplings |
Couplings - Clutch - Shaft Mounted
|
Clutches - Shaft Mounted |
Clutches - Shaft Mounted
24 V DC - Zero Backlash Armature - For parallel loads.
This basic information is designed to assist you to make a decision on which clutch to use. Full dimensions available on request.
|
Clutches - Slip |
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Requires no power.
Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.
|
Collars - Shaft |
Collars - Shaft - D-Bore
|
Collars - Shaft - Fairloc
|
Collars - Shaft - Gripfast
Self Locking - Quick Release.
265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.
|
Collars - Shaft - Hinged Type
Precision machined. Convenient easy-to-assemble design.
Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.
|
Collars - Shaft - Standard
Includes miniature precision types. Carbon steel, 303 and 316 stainless.
|
Collars - Shaft - Stroke Adjustment
Recommended tolerances for mating shaft diameter : h6. Use with rubber washers listed under WASHERS.
|
Collars - Shaft - With Integral Shim
Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.
|
Couplings - Flexible-Shaft |
Couplings - Flexible-Shaft Type
Nonmagnetic flexible shaft couplings.
Maximum Torque 0.39 N.m (3.5 lb.in). Minium operating radius 89 mm (3.5 in.). Torsional deflection 1.8 Deg per lb.in per inch (25mm) of shaft in Winding Direction. Torsional deflection 2.6 Deg per lb.in per inch (25mm) of shaft in Unwinding Direction. Cadmium Plated Brass Ends - Phosphor Bronze Cable - 300 Series Stainless Screws.
|
Shafts - Flexible - Coupling Ends - Cased
|
Shafts - Flexible - Coupling Ends - Open (SDP)
|
Shafts - Flexible - Panel Mount - Cased
|
Shafts - Flexible - Panel Mount - Open
|
Diamond Knurled Tip Set Screws |
Socket Set Screws - Diamond Knurled Tip
Grips rough shafts. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Drives - Gear |
Gearboxes - Output Shafts
For use in Cross Axis gearboxes with bores. P and PF Series.
|
Drylin® Shafts and Bearings |
Drylin Sliding Bearings
Linear sliding motion.
|
Drylin Sliding Film
Linear sliding motion.
|
Housings - Igubal - Sliding
|
Shafting - Aluminium
Recommended for use with Igubal Drylin bearings only.
|
Extenders - Shaft |
Extenders - Shaft
Miniature and large shaft extenders.
|
Flexible Couplings |
Shafts - Flexible - Coupling Ends - Open (Ondrives)
|
Gearheads - Inline |
Gearheads - Inline - 12 mm x Various Lengths
12mm Diameter - Suits 1mm Motor shaft.
Input and Output shafts have same centre line. Input and output in same direction. Requires 0.15 Module pinion as shown in tables. Suits 1mm Motor Shaft.
|
Gearheads - Inline - 16 mm x Various Lengths
16mm Diameter - Suits 1.5mm Motor Shaft.
Input and Output shafts have same centre line. Input and output in same direction. Requires 0.15 Module pinion as shown in tables. Suits 1.5mm Motor Shaft.
|
Gearheads - Inline - 20 x 21mm
20mm Diameter - Suits 2mm Motor Shaft.
Input and output in same direction. Requires 0.25 Module pinion as shown in tables. Suits 2mm Motor Shaft.
|
Gearheads - Inline - 22 mm x Various Lengths
22mm Diameter - Suits 2mm Motor Shaft.
Input and output in same direction. Requires 0.25 Module pinion as shown in tables. Suits 2mm Motor Shaft.
|
Gearheads - Inline - 27 x 21.6mm
27mm Diameter - Suits 2mm Motor Shaft.
Input and output in same direction. Requires 0.2 Module pinion as shown in tables. Suits 2mm Motor Shaft.
|
Gearheads - Inline - 37 mm x Various Lengths
37mm Diameter - Suits 2mm Motor Shaft.
Input and output in same direction. Requires 0.5 Module pinion as shown in tables. Suits 2mm Motor Shaft.
|
Gearheads - Inline - 42 x 31.5mm
42mm Diameter - Suits 3mm Motor Shaft.
Input and output in same direction. Requires 0.4 Module pinion as shown in tables. Suits 3mm Motor Shaft.
|
Gearheads - Inline - 42.5 x 11.3mm
42mm Diameter - Suits 2mm Motor Shaft.
Can be used as replacement gearheads for --- Gearmotors - DC - Size 42 Light Duty. Use with pinion gear GS0.30-10-0200B0200-BR-N (0.3 module). Suits 2mm Motor Shaft.
|
Gearheads - Inline - 43 mm Square x Various Lengths
43mm Square - Suits 4mm Motor Shaft.
Can be used as replacement gearheads for --- Gearmotors - DC - Size 43. Requires 0.6 Module pinion as shown in tables. Suits 4mm Motor Shaft.
|
Gearheads - Inline - 48 mm Square x 28.2mm
48mm Square - Suits 3mm Motor Shaft.
Can be used as replacement gearheads for --- Gearmotors - DC - Size 48. Requires 0.4 Module pinion as shown in tables. Suits 3mm Motor Shaft.
|
Gearheads - Inline - 60 mm Square x 36.2mm
60mm Square - Suits 4mm Motor Shaft.
Can be used as replacement gearheads for --- Gearmotors - DC - Size 60 (D33S52M and D33S57M54 series). Requires 0.5 Module pinion as shown in tables. Suits 4mm Motor Shaft.
|
Gearheads - Inline - 60 mm Square x Various Lengths
60mm Square - Suits 4mm Motor Shaft.
Can be used as replacement gearheads for --- Gearmotors - A.C. Single Phase - Size 60. Can be used as replacement gearheads for --- Gearmotors - DC - Size 60 (D33S54M Series). Requires 0.5 Module pinion as shown in tables. Suits 4mm Motor Shaft.
|
Gears - Pinion |
Shafts - Pinion
|
Gears - Spur - Stem - Metric Sizes |
Gears - Spur - Module 0.50 - Stem
Gears with integral shafts.
Metallic.
|
Gears - Spur - Module 0.75 - Stem
Gears with integral shafts.
Metallic.
|
Gears - Spur - Module 0.80 - Stem
Gears with integral shafts.
Metallic.
|
Gears - Spur - Module 1.00 - Stem
Gears with integral shafts.
Metallic.
|
Gears - Spur - Module 1.50 - Stem
Gears with integral shafts.
Metallic.
|
Gears - Spur - Module 2.00 - Stem
Gears with integral shafts.
Metallic.
|
Gears - Spur - Module 2.50 - Stem
Gears with integral shafts.
Metallic.
|
Gears - Spur - Module 3.00 - Stem
Gears with integral shafts.
Metallic.
|
Hobby Shafting |
Hobby Shafting - Precision Ground
A small selection of popular sizes.
See main listings for sizes not shown here.
|
Hollow Shafts |
Bearings - Needle Roller - Inner Rings
Hardened sleeves for needle roller bearings.
|
Tube - Hexagonal - Brass
|
Tube - Rectangular - Brass
|
Tube - Round - Aluminium
For general hobby applications.
|
Tube - Round - Brass
For general hobby applications.
|
Tube - Round - Bronze - 954 Aluminium
Sizes listed are FINISHED SIZE. Product supplied will be larger on OD and smaller on bore.
|
Tube - Round - Bronze - LG2 (Standard)
Sizes listed are FINISHED SIZE. Product supplied will be larger on OD and smaller on bore.
|
Tube - Round - Bronze - Phosphor
Sizes listed are FINISHED SIZE. Product supplied will be larger on OD and smaller on bore.
|
Tube - Round - Copper
For general hobby applications.
|
Tube - Round - Sintered Bronze
Oil impregnated sintered bronze tube - self lubricating.
|
Tube - Round - Stainless Steel
For general hobby applications.
|
Tube - Square - Brass
|
Internal Lock Washers |
Washers - Lock - Internal
These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.
|
Linear Ball Splines |
Linear Ball Splines - Bearings - Flanged
Use with Linear Ball Spline Shaft.
|
Linear Ball Splines - Bearings - Unflanged
Use with Linear Ball Spline Shaft.
|
Linear Ball Splines - Shaft
Use with either flanged or unflanged Linear Ball Spline Bearings.
|
Linear Shaft Supports |
Shafting - Pre Drilled for Rail Supports
|
Shafting - Rail Supports - With Shaft
Includes shaft.
|
Shafting - Rail Supports - Without Shaft
For mounting of shafting.
|
Shafting - Supports - Flanged Four Bolt
For linear shafting.
|
Shafting - Supports - Flanged Two Bolt
For linear shafting.
|
Shafting - Supports - Pedestal Two Bolt
For linear shafting.
|
Locks - Shaft |
Shaft Locks - Potentiometer
|
Rail Supports for Shafting |
Guide Rails - Utilitrak
|
Reducers - Shaft |
Reducers - Bore
Inch to Metric / Inch to Inch / Metric to Metric.
|
Rigid Shaft Couplings |
Couplings - Rigid
|
Rollers - Idler - Without Shaft |
Rollers - Idler - Stainless Steel
|
Round Spacers |
Spacers - Round - Through Bore
Shaft spacers - Steel - Stainless Steel - Nylon - Brass - Aluminium.
|
Shaft Couplings |
Couplings - Ball
High Speed - Up to 15 Degrees Angular Offset.
|
Couplings - Bantam - Components
Isolates vibration up to 85%. Sleeve provides electrical insulation.
|
Couplings - Bellows
Zero Backlash - Constant Velocity Ratio - Low Inertia.
|
Couplings - Bellows - Hiflex
Precise adjustment - Vibration resistance - Large misallignment capability.
|
Couplings - BoWex - Junior
Nylon 2 piece and 3 piece couplings.
|
Couplings - Clutch - Flange Mounted
|
Couplings - Control Flex
|
Couplings - Cross Joint
|
Couplings - Double Disk
Zero Backlash - High Torsional Stiffness.
|
Couplings - Geargrip
|
Couplings - Helical - Standard
|
Couplings - Jaw Type - With Rubber Spider
Max 3600 RPM.
|
Couplings - K Type
Up to 3600 RPM - Minus 20 to Plus 60 Degrees C.
|
Couplings - Neo-Flex
|
Couplings - Oldham - Complete
|
Couplings - Single Disk
|
Couplings - Sleeve Type
|
Couplings - Slip - Spring Wrapped
Tension control - transmission overload protection.
|
Couplings - Slit Type
Aluminium - Stainless Steel - Flexible - Zero Backlash.
|
Couplings - Spider Type
|
Couplings - Spline Type
|
Couplings - Spring
|
Couplings - Torque Tube
Internal compression spring preloads the ends against axial movement and backlash.
|
Couplings - Uniflex
High speed to 30000 rpm.
|
Shaft Spacers |
Sleeves - Hex Hole
|
Sleeves - Square Hole - Plain
|
Spacers - Hex - Threaded
Threaded Hex Spacers.
|
Spacers - Square - Threaded
Threaded spacers.
|
Standoffs - Hexagonal
Swage Type - Threaded - Brass or Stainless Steel.
|
Standoffs - Round
Swage Type - Threaded - Brass or Stainless Steel.
|
Washers - Flat - Commercial - All Types
Includes all materials listed in other commercial washer categories.
|
Shaft Supports |
Shafting - Supports - Block
For linear shafting.
Material: Aluminium.
|
Shafting |
Rod - Drill
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
|
Rod - Round - Acetal
Hard, stiff plastic for machining bushes, gears etc with close tolerances. Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Aluminium
For general hobby applications.
|
Rod - Round - Brass
For general hobby applications.
|
Rod - Round - Bronze - 686 Manganese
Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Bronze - 954 Aluminium
Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Bronze - LG2 (Standard)
Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Bronze - PB1
Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Nylon
High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Polyester PETP
High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - PTFE
Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Sintered Bronze
Sintered bronze is supplied oversized so it can be machine finished to the dimensions shown.
|
Rod - Round - Stainless Steel
For general hobby applications.
|
Rod - Round - Urethane
|
Shafting - Pipe - Aluminium |
Shafting - Pipe - Aluminium
Recommended for use with Igubal Drylin bearings only.
Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: >40µm. Surface Hardness: 450-550 HV. Roughness: Ra<0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: 2
|
Shafting - Supported |
Shafting - Supported - Pre-Drilled - Aluminium
For Drylin Bearings.
Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: >40µm. Surface Hardness: 450-550 HV. Roughness: Ra<0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: 2
|
Shaftloc-tm Sleeves |
Sleeves - Shaftloc-tm
Simple effective way to lock components onto shafts.
|
|
