Sealing Plugs Stainless Sleeve With Hardened Ball Categories


Category Matches

Sealing Plugs

TopHide Pictures

Sealing Plugs - Stainless Sleeve with Hardened Ball
Sealing Plugs - Stainless Sleeve with Hardened Ball

Search Rating: 87%

The sealing plug is a safe, quick, leakproof and low cost method for sealing cross-drilled holes. It ensures peak performance with a comfortable safety margin even in extreme applications.

Sleeve: Stainless Steel DIN 1.4305, AISI 303. Ball: Bearing Steel, Heat Treated. Hardness: HB = 220.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Sealing Plugs - Stainless Sleeve with Hardened Ball.

Plungers Ball

TopHide Pictures

Plungers - Ball - Push Fit - 303 Stainless Steel
Plungers - Ball - Push Fit - 303 Stainless Steel

Search Rating: 57%

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded

Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Ball - Push Fit - 303 Stainless Steel.

Plungers - Ball - Push Fit - Plastic Body - Plastic Ball
Plungers - Ball - Push Fit - Plastic Body - Plastic Ball

Search Rating: 51%

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded. Plastic body and ball.

Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Ball - Push Fit - Plastic Body - Plastic Ball.

Shafting Precision Ground

TopHide Pictures

Shafting - Ground - Precision - Stainless 416 Grade Hardened
Shafting - Ground - Precision - Stainless 416 Grade Hardened

Search Rating: 48%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 416 Grade Hardened.

Shafting - Ground - Precision - Stainless 420 Grade Hardened
Shafting - Ground - Precision - Stainless 420 Grade Hardened

Search Rating: 48%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 420 Grade Hardened.

Shafting - Ground - Precision - Stainless 440C Grade Hardened
Shafting - Ground - Precision - Stainless 440C Grade Hardened

Search Rating: 48%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 440C Grade Hardened.

Tooling Balls

TopHide Pictures

Balls - Checking - Stainless Steel
Balls - Checking - Stainless Steel

Search Rating: 48%

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Checking - Stainless Steel.

Balls - Fixture - Stainless Steel
Balls - Fixture - Stainless Steel

Search Rating: 48%

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Fixture - Stainless Steel.

Balls - Checking - Stainless Steel - With Tapped Shank
Balls - Checking - Stainless Steel - With Tapped Shank

Search Rating: 48%

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Checking - Stainless Steel - With Tapped Shank.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Search Rating: 47%

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Washers Only - Stainless Steel.

Collars

TopHide Pictures

Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Search Rating: 45%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hinged - Stainless Steel.

Sleeves

TopHide Pictures

Sleeves - Hex Hole - Hardened
Sleeves - Hex Hole - Hardened

Search Rating: 45%

Also see combined categories:
All Hex Hole Sleeves

Pre hardened to Rockwell 23-30C. Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Sleeves - Hex Hole - Hardened.

Sleeves - Square Hole - Plain - Hardened
Sleeves - Square Hole - Plain - Hardened

Search Rating: 45%

Also see combined categories:
All Square Hole Sleeves

Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Sleeves - Square Hole - Plain - Hardened.

Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 43%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Stainless Steel - Closed.

Bearings Needle Roller

TopHide Pictures

Bearings - Needle Roller - Inner Rings
Bearings - Needle Roller - Inner Rings

Search Rating: 43%

Hardened sleeves for needle roller bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Needle Roller - Inner Rings.

Couplings Rigid

TopHide Pictures

Couplings - Rigid - 1 Piece Clamp - Stainless Steel
Couplings - Rigid - 1 Piece Clamp - Stainless Steel

Search Rating: 41%

Also see combined categories:
All Rigid Couplings

303 Grade Stainless

Precision Machined. High torsional load. Non marring, easy to install and adjust. Use on hardened shafts, rigid clamp type design, easily machinable. Available with stepped bores and keyways on 5 week delivery.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Rigid - 1 Piece Clamp - Stainless Steel.

Plungers Ball

TopHide Pictures

Plungers - Ball - Threaded - With Limit Switch
Plungers - Ball - Threaded - With Limit Switch

Search Rating: 41%

Also see combined categories:
All Threaded Ball Plungers

Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.

Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N. Working Temperature: -10 deg C to 80 deg C. Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA. Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long. Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Ball - Threaded - With Limit Switch.

Bearings Hydrodynamic

TopHide Pictures

Bearings - Hydrodynamic Pressure
Bearings - Hydrodynamic Pressure

Search Rating: 36%

Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Hydrodynamic Pressure.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 119733 products in 2831 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.