Screws Self Tapping Pan Head Steel Black Oxide Categories


Category Matches

Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Pan Head - Steel - Black Oxide
Screws - Self Tapping - Pan Head - Steel - Black Oxide

Search Rating: 73%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Pan Head - Steel - Black Oxide. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Self Tapping - Pan Head - Steel - Black Oxide.

Screws - Self Tapping - Countersunk - Philips - Black Oxide
Screws - Self Tapping - Countersunk - Philips - Black Oxide

Search Rating: 57%

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Countersunk - Philips - Black Oxide.

Screws - Self Tapping - Pan Head - 316 Stainless
Screws - Self Tapping - Pan Head - 316 Stainless

Search Rating: 53%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Pan Head - 316 Stainless.

Screws - Self Tapping - Pan Head - Zinc Plated
Screws - Self Tapping - Pan Head - Zinc Plated

Search Rating: 53%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Pan Head - Zinc Plated.

Screws - Self Tapping - Pan Head - 302 - 304 Stainless
Screws - Self Tapping - Pan Head - 302 - 304 Stainless

Search Rating: 53%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Pan Head - 302 - 304 Stainless.

Screws Panel

TopHide Pictures

Screws - Panel - Steel
Screws - Panel - Steel

Search Rating: 47%

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. Carbon steel with black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Panel - Steel.

Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - For Soft Plastics - Pan Head
Screws - Self Tapping - For Soft Plastics - Pan Head

Search Rating: 44%

Also see combined categories:
All Self Tapping Screws
All Self Tapping Screws for Plastics

Tri-Lobe Course Thread Plastic Threading Screws

Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - For Soft Plastics - Pan Head. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Self Tapping - For Soft Plastics - Pan Head.

Screws - Self Drilling - Pan Head
Screws - Self Drilling - Pan Head

Search Rating: 44%

Also see combined categories:
All Self Drilling Screws

Zinc chromate fluted point. Used for fastening sheet metal to wood or metal. Drills, taps and fastens in one application.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Drilling - Pan Head.

Screws - Self Tapping - For Hard or Soft Plastics - Pan Head
Screws - Self Tapping - For Hard or Soft Plastics - Pan Head

Search Rating: 44%

Also see combined categories:
All Self Tapping Screws
All Self Tapping Screws for Plastics

Tri-Lobe Course Thread Plastic Threading Screws

Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - For Hard or Soft Plastics - Pan Head.

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Search Rating: 40%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Aluminium - Steel.

Inserts - Self Tapping - For Plastics - Steel
Inserts - Self Tapping - For Plastics - Steel

Search Rating: 40%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Plastics - Steel.

Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Countersunk - Undercut Head
Screws - Self Tapping - Countersunk - Undercut Head

Search Rating: 39%

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Countersunk - Undercut Head.

Screws - Self Tapping - Countersunk - Philips - 304 Stainless
Screws - Self Tapping - Countersunk - Philips - 304 Stainless

Search Rating: 38%

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Countersunk - Philips - 304 Stainless.

Screws - Self Tapping - Countersunk - Philips - 316 Stainless
Screws - Self Tapping - Countersunk - Philips - 316 Stainless

Search Rating: 38%

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Countersunk - Philips - 316 Stainless.

Screws - Self Tapping - Countersunk - Philips - Zinc Plated
Screws - Self Tapping - Countersunk - Philips - Zinc Plated

Search Rating: 38%

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Countersunk - Philips - Zinc Plated.

Pulleys Timing XL Pitch 5.08mm

TopHide Pictures

Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore
Pulleys - Timing -  5.080mm Pitch - XL -  9.5mm Wide - Through Bore

Search Rating: 38%

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy and Black Oxide coated steel. Finished bore with set screw locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore.

Screws Self Tapping

TopHide Pictures

Screws - Self Drilling - Hex Washer Head
Screws - Self Drilling - Hex Washer Head

Search Rating: 38%

Also see combined categories:
All Self Drilling Screws

Zinc chromate. Fluted point. Used for fastening sheet metal to wood or metal. Drills, taps and fastens in one application.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Drilling - Hex Washer Head.

Screws - Self Drilling - Hex Head - With Washers
Screws - Self Drilling - Hex Head - With Washers

Search Rating: 38%

Also see combined categories:
All Self Drilling Screws

With bonded neoprene washer. Galvanised for corrosion resistance.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Drilling - Hex Head - With Washers.

Pulleys Timing GT2 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT2 - 15mm Wide - Through Bore

Search Rating: 38%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore.

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Plastics - Stainless 303
Inserts - Self Tapping - For Plastics - Stainless 303

Search Rating: 37%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Plastics - Stainless 303.

Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Search Rating: 37%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Aluminium - Stainless 303.

Screws Shoulder

TopHide Pictures

Screws - Shoulder - Jig and Fixture - Steel
Screws - Shoulder - Jig and Fixture - Steel

Search Rating: 36%

Also see combined categories:
All Shoulder Screws

Used in construction of tool, jig and fixture work. 4140L heat treated steel with black oxide finish.

Also known as stripper bolts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Shoulder - Jig and Fixture - Steel.

Nuts Lock

TopHide Pictures

Nuts - Quick Release
Nuts - Quick Release

Search Rating: 35%

Also see combined categories:
All Lock Nuts

UNC

Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Quick Release.

Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Brass
Screws - Thumb - Knurled  - Brass

Search Rating: 35%

Also see combined categories:
All Thumb Screws

Brass knurled head thumb screws with zinc or black oxide protective coating.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Knurled - Brass.

Pulleys Timing GT2 8mm

TopHide Pictures

Pulleys - Timing - 8.000mm Pitch - GT2 - 50mm Wide - Through Bore
Pulleys - Timing -  8.000mm Pitch - GT2 - 50mm Wide  - Through Bore

Search Rating: 34%

Also see combined categories:
All 8mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide.

Black oxide coated steel. No locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 8.000mm Pitch - GT2 - 50mm Wide - Through Bore.

Bearings Mounted

TopHide Pictures

Bearings - SDP - PTFE Filled Acetal - Flange Mounted
Bearings - SDP - PTFE Filled Acetal - Flange Mounted

Search Rating: 34%

Also see combined categories:
All Press In Bearings

Retainer : Carbon Steel Black Oxide Finish. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Self lubricating. Use any shaft material with 0.4 um or finer finish. Soft or hard shafting is OK.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - SDP - PTFE Filled Acetal - Flange Mounted.

Screws Pan Head

TopHide Pictures

Screws - Pan Head - Steel - Philips
Screws - Pan Head - Steel - Philips

Search Rating: 33%

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Pan Head - Steel - Philips. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - Steel - Philips.

Screws - Pan Head - Steel - Pozidrive
Screws - Pan Head - Steel - Pozidrive

Search Rating: 33%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Pan Head - Steel - Pozidrive. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - Steel - Pozidrive.

Screws - Pan Head - Steel - Slotted
Screws - Pan Head - Steel - Slotted

Search Rating: 33%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Pan Head - Steel - Slotted.

Pulleys Timing GT2 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT2 - 25mm Wide - Through Bore

Search Rating: 33%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Aluminium, steel and cast iron.

Black oxide coated steel with unfinished bores. Unfinished types requires drilling and tapping. Bore requires machining to finished size.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Through Bore.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 120906 products in 2840 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.