About Us Brands Download Contact Counter Sales Distributors FAQ Freight Payments Products Search Site Technical More Links...

Screws Round Head 304 Stainless Slotted Categories


Category Matches

Screws Round Head

TopHide Pictures

Screws - Round Head - 304 Stainless - Slotted
Screws - Round Head - 304 Stainless - Slotted

Search Rating: 68%

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Round Head - 304 Stainless - Slotted.

Pins - Dowel

TopHide Pictures

Pins - Hammer Drive - Round Head - Stainless Steel
Pins - Hammer Drive - Round Head - Stainless Steel

Search Rating: 63%

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Hammer Drive - Round Head - Stainless Steel.

Screws Pan Head

TopHide Pictures

Screws - Pan Head - 303-304 Stainless - Philips
Screws - Pan Head - 303-304 Stainless - Philips

Search Rating: 59%

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Pan Head - 303-304 Stainless - Philips. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - 303-304 Stainless - Philips.

Screws - Pan Head - 316 Stainless - Philips
Screws - Pan Head - 316 Stainless - Philips

Search Rating: 57%

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Pan Head - 316 Stainless - Philips.

Screws Cheese Head

TopHide Pictures

Screws - Fillister Head - 304 Stainless - Slotted
Screws - Fillister Head - 304 Stainless - Slotted

Search Rating: 55%

Also see combined categories:
All Machine Screws

Metric - UNC - UNF

Nuts sold seperately - See Nuts. DIN 84.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Fillister Head - 304 Stainless - Slotted. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Fillister Head - 304 Stainless - Slotted.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - 304 Stainless - Slotted
Screws - Countersunk - 304 Stainless - Slotted

Search Rating: 54%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Countersunk - 304 Stainless - Slotted. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Countersunk - 304 Stainless - Slotted.

Screws - Countersunk - Oval Top - 304 Stainless - Slotted
Screws - Countersunk - Oval Top - 304 Stainless - Slotted

Search Rating: 54%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Countersunk - Oval Top - 304 Stainless - Slotted. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Countersunk - Oval Top - 304 Stainless - Slotted.

Screws Hex Head

TopHide Pictures

Screws - Hex Head - 304 Stainless
Screws - Hex Head - 304 Stainless

Search Rating: 53%

Also see combined categories:
All Machine Screws

Metric - UNF - UNC

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Hex Head - 304 Stainless. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Hex Head - 304 Stainless.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - 304 Stainless - Philips
Screws - Countersunk - 304 Stainless - Philips

Search Rating: 53%

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Countersunk - 304 Stainless - Philips. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Countersunk - 304 Stainless - Philips.

Screws Button Head

TopHide Pictures

Screws - Button - Socket - 304 Stainless
Screws - Button - Socket - 304 Stainless

Search Rating: 53%

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Button - Socket - 304 Stainless.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - 304 Stainless
Screws - Countersunk - Socket - 304 Stainless

Search Rating: 53%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Countersunk - Socket - 304 Stainless.

Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - 303 - 304 Stainless
Screws - Cap - Socket - 303 - 304 Stainless

Search Rating: 53%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Stainless Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Cap - Socket - 303 - 304 Stainless. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Cap - Socket - 303 - 304 Stainless.

Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Pan Head - 302 - 304 Stainless
Screws - Self Tapping - Pan Head - 302 - 304 Stainless

Search Rating: 53%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Pan Head - 302 - 304 Stainless.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Oval Top - 304 Stainless - Philips
Screws - Countersunk - Oval Top - 304 Stainless - Philips

Search Rating: 53%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Countersunk - Oval Top - 304 Stainless - Philips.

Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Countersunk - Philips - 304 Stainless
Screws - Self Tapping - Countersunk - Philips - 304 Stainless

Search Rating: 52%

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Countersunk - Philips - 304 Stainless.

Screws Pan Head

TopHide Pictures

Screws - Pan Head - 303-304 Stainless - Slotted
Screws - Pan Head - 303-304 Stainless - Slotted

Search Rating: 49%

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Pan Head - 303-304 Stainless - Slotted.

Screws - Pan Head - 303-304 Stainless - Pozidrive
Screws - Pan Head - 303-304 Stainless - Pozidrive

Search Rating: 48%

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Pan Head - 303-304 Stainless - Pozidrive. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - 303-304 Stainless - Pozidrive.

Latches

TopHide Pictures

Latches - Pull - Flush - Locking
Latches - Pull - Flush - Locking

Search Rating: 47%

Low profile. Corrosion resistant. Simple 50.8mm (2 in.) round hole installation. Mounts in panels up to 22.2mm thick. M5 philips pan head mounting screws. Includes tab for inside actuation.

Max working load 26kg. Ultimate load 53kg. Black polycarbonate with stainless spring, keeper and screws.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Pull - Flush - Locking.

Screws Cheese Head

TopHide Pictures

Screws - Fillister Head - 316 Stainless - Slotted
Screws - Fillister Head - 316 Stainless - Slotted

Search Rating: 47%

Also see combined categories:
All Machine Screws

Metric - UNC - UNF

Nuts sold seperately - See Nuts. DIN 84.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Fillister Head - 316 Stainless - Slotted. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Fillister Head - 316 Stainless - Slotted.

Screws Shoulder

TopHide Pictures

Screws - Shoulder - Slotted Head - Stainless
Screws - Shoulder - Slotted Head - Stainless

Search Rating: 47%

Also see combined categories:
All Shoulder Screws

303 Stainless Steel

Also known as stripper bolts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Shoulder - Slotted Head - Stainless.

Screws - Shoulder - Slotted Shallow Head - Stainless
Screws - Shoulder - Slotted Shallow Head - Stainless

Search Rating: 46%

Also see combined categories:
All Shoulder Screws


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Shoulder - Slotted Shallow Head - Stainless.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - 316 Stainless - Slotted
Screws - Countersunk - 316 Stainless - Slotted

Search Rating: 46%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Countersunk - 316 Stainless - Slotted. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Countersunk - 316 Stainless - Slotted.

Screws Cheese Head

TopHide Pictures

Screws - Fillister Head - Stainless - Philips
Screws - Fillister Head - Stainless - Philips

Search Rating: 46%

Also see combined categories:
All Machine Screws

UNC Only

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Fillister Head - Stainless - Philips.

Screws Pan Head

TopHide Pictures

Screws - Pan Head - 316 Stainless - Pozidrive
Screws - Pan Head - 316 Stainless - Pozidrive

Search Rating: 45%

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Pan Head - 316 Stainless - Pozidrive.

Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Stainless - Precision Head
Screws - Thumb - Knurled  - Stainless - Precision Head

Search Rating: 45%

Also see combined categories:
All Thumb Screws


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Knurled - Stainless - Precision Head.

Screws - Thumb - Knurled - Stainless - Slim Head
Screws - Thumb - Knurled  - Stainless - Slim Head

Search Rating: 45%

Also see combined categories:
All Thumb Screws


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Knurled - Stainless - Slim Head.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Stainless - Pozidrive
Screws - Countersunk - Stainless - Pozidrive

Search Rating: 45%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric small selection only.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Countersunk - Stainless - Pozidrive. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Countersunk - Stainless - Pozidrive.

Screws Panel

TopHide Pictures

Screws - Panel - Stainless
Screws - Panel - Stainless

Search Rating: 45%

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. 303 Stainless Steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Panel - Stainless.

Screws Button Head

TopHide Pictures

Screws - Button - Torx - Stainless
Screws - Button - Torx - Stainless

Search Rating: 45%

Also see combined categories:
All Machine Screws

UNC - UNF

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Button - Torx - Stainless.

Screws Shoulder

TopHide Pictures

Screws - Shoulder - Socket Head - 303 Stainless
Screws - Shoulder - Socket Head - 303 Stainless

Search Rating: 45%

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Shoulder - Socket Head - 303 Stainless.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - 316 Stainless - Philips
Screws - Countersunk - 316 Stainless - Philips

Search Rating: 45%

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Countersunk - 316 Stainless - Philips.

Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Stainless
Screws - Thumb - Knurled  - Stainless

Search Rating: 45%

Also see combined categories:
All Thumb Screws

Stainless steel knurled head thumb screws


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Knurled - Stainless.

Screws Button Head

TopHide Pictures

Screws - Button - Socket - 316 Stainless
Screws - Button - Socket - 316 Stainless

Search Rating: 45%

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Button - Socket - 316 Stainless.

Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - 316 Stainless
Screws - Cap - Socket - 316 Stainless

Search Rating: 45%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Stainless Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Cap - Socket - 316 Stainless.

Screws Captive

TopHide Pictures

Screws - Captive - Thumb - 303 Stainless
Screws - Captive - Thumb - 303 Stainless

Search Rating: 45%

Also see combined categories:
All Captive Screws

Knurled Head.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Captive - Thumb - 303 Stainless.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - 316 Stainless
Screws - Countersunk - Socket - 316 Stainless

Search Rating: 45%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Countersunk - Socket - 316 Stainless.

Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Pan Head - 316 Stainless
Screws - Self Tapping - Pan Head - 316 Stainless

Search Rating: 45%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Pan Head - 316 Stainless.

Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Washer Face - Stainless Steel
Screws - Thumb - Knurled - Washer Face - Stainless Steel

Search Rating: 45%

Also see combined categories:
All Thumb Screws

Knurled head stainless steel thumb screws with an integral washer


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Knurled - Washer Face - Stainless Steel.

Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Countersunk - Philips - 316 Stainless
Screws - Self Tapping - Countersunk - Philips - 316 Stainless

Search Rating: 44%

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Countersunk - Philips - 316 Stainless.

Screws Socket Set (Grub Screws)

TopHide Pictures

Socket Set Screws - Nylon Tipped - 304 Stainless Steel
Socket Set Screws - Nylon Tipped - 304 Stainless Steel

Search Rating: 42%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Nylon Tipped - 304 Stainless Steel.

Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916
Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916

Search Rating: 42%

Also see combined categories:
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916.

Pins - Pull

TopHide Pictures

Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Round Handle - Stainless Steel.

Linear Slides

TopHide Pictures

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext

Search Rating: 42%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext.

Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext
Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext

Search Rating: 42%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext.

Pins - Dowel

TopHide Pictures

Pins - Dowel - Standard - 303-304 Stainless - Rounded Both Ends
Pins - Dowel - Standard - 303-304 Stainless - Rounded Both Ends

Search Rating: 41%

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 303/304 Grade Stainless- DIN7

Rounded end dowel pins are measured from the start of the edge rounding. This allows the pin to completely fill the hole after you grind off the rounded end. Diameter tolerances are m6.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Dowel - Standard - 303-304 Stainless - Rounded Both Ends.

Pins - Wirelock

TopHide Pictures

Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel
Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel

Search Rating: 41%

Also see combined categories:
All Wire Lock Lynch Pins

Also known as snapper pins


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Hygienic - 304 Stainless Steel
Mounts - Leveling - Hygienic - 304 Stainless Steel

Search Rating: 41%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Hygienic - 304 Stainless Steel.

Latches

TopHide Pictures

Latches - Paddle - Flush - Miniature - 304 Stainless
Latches - Paddle - Flush - Miniature - 304 Stainless

Search Rating: 40%

Flush mounting. Slide is plastic. Spring loaded paddle won't rattle. Smooth push to close latching. Quick one screw mounting. Max load 8.9kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Paddle - Flush - Miniature - 304 Stainless.

Linear Slides

TopHide Pictures

Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext
Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Search Rating: 40%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Hygienic - Anchoring - One Hole
Mounts - Leveling - Hygienic - Anchoring - One Hole

Search Rating: 40%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Hygienic - Anchoring - One Hole.

Mounts - Leveling - Hygienic - Anchoring - Two Hole
Mounts - Leveling - Hygienic - Anchoring - Two Hole

Search Rating: 40%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Hygienic - Anchoring - Two Hole.

Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel

Search Rating: 39%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 12o swivel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel.

Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel

Search Rating: 39%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 1o swivel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel.

Screws Round Head

TopHide Pictures

Screws - Round Head - Brass - Slotted
Screws - Round Head - Brass - Slotted

Search Rating: 39%

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws BSW - UNF - UNC

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Round Head - Brass - Slotted. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Round Head - Brass - Slotted.

Screws - Round Head - Nylon - Slotted
Screws - Round Head - Nylon - Slotted

Search Rating: 39%

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Round Head - Nylon - Slotted.

Screws - Round Head - Steel - Slotted
Screws - Round Head - Steel - Slotted

Search Rating: 39%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Round Head - Steel - Slotted.

Linear Slides

TopHide Pictures

Slides - Drawer - Front Disconnect - Friction - 19mm Ext
Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Search Rating: 39%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext.

Slides - Drawer - Front Disconnect - Lever - Full Ext
Slides - Drawer - Front Disconnect - Lever - Full Ext

Search Rating: 38%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Front Disconnect - Lever - Full Ext.

Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage
Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Search Rating: 38%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage.

Slides - Drawer - Front Disconnect - Latch Lever - Full Ext
Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Search Rating: 38%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Front Disconnect - Latch Lever - Full Ext.

Screws Round Head

TopHide Pictures

Screws - Roof Bolt - Steel
Screws - Roof Bolt - Steel

Search Rating: 37%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Roof Bolt - Steel.

Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Search Rating: 35%

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Stainless Steel.

Tube and Tubing

TopHide Pictures

Tube - Round - Stainless Steel
Tube - Round - Stainless Steel

Search Rating: 35%

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tube - Round - Stainless Steel.

Screws Coach

TopHide Pictures

Screws - Coach - 316 Stainless
Screws - Coach - 316 Stainless

Search Rating: 35%


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Coach - 316 Stainless.

Bumpers

TopHide Pictures

Bumpers - Round - Urethane - Female Washer
Bumpers - Round - Urethane - Female Washer

Search Rating: 35%

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core. Washer type has a counterbored hole to accept a socket head cap screw. Flat washer molded inside.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bumpers - Round - Urethane - Female Washer.

Screws Security

TopHide Pictures

Screws - Security - Socket - Countersunk - Stainless
Screws - Security - Socket - Countersunk - Stainless

Search Rating: 35%

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Security - Socket - Countersunk - Stainless.

Spacers

TopHide Pictures

Spacers - Round - Through Bore - Stainless Steel
Spacers - Round - Through Bore - Stainless Steel

Search Rating: 35%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Round - Through Bore - Stainless Steel.

Screws Thumb

TopHide Pictures

Screws - Thumb - Shoulder
Screws - Thumb - Shoulder

Search Rating: 34%

Also see combined categories:
All Thumb Screws

303 Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Shoulder.

Screws Socket Set (Grub Screws)

TopHide Pictures

Socket Set Screws - Brass Tipped - Stainless Steel
Socket Set Screws - Brass Tipped - Stainless Steel

Search Rating: 34%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Brass Tipped - Stainless Steel.

Hooks

TopHide Pictures

Shackles - Anchor - Screw Pin - 316 Stainless Steel
Shackles - Anchor - Screw Pin - 316 Stainless Steel

Search Rating: 34%

Also see combined categories:
All Shackles

Meets US Federal specification RRC-271D Type IV


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shackles - Anchor - Screw Pin - 316 Stainless Steel.

Couplings Bellows

TopHide Pictures

Couplings - Bellows - Set Screw - 316 Stainless
Couplings - Bellows - Set Screw - 316 Stainless

Search Rating: 34%

Also see combined categories:
All Bellows Couplings

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Stainless Steel 303L Bellows. Stainless Steel 316 Hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Bellows - Set Screw - 316 Stainless.

Washers Finishing

TopHide Pictures

Washers - Cup - Stainless Steel
Washers - Cup - Stainless Steel

Search Rating: 34%

Also see combined categories:
All Cup Washers

For countersunk screws.

Stainless Steel cup washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Cup - Stainless Steel.

Pins - Dowel

TopHide Pictures

Pins - Dowel - Standard - 316 Stainless - Rounded Both Ends
Pins - Dowel - Standard - 316 Stainless - Rounded Both Ends

Search Rating: 34%

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 316 Grade - DIN7

Diameter tolerances are m6.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Dowel - Standard - 316 Stainless - Rounded Both Ends.

Screws Socket Set (Grub Screws)

TopHide Pictures

Socket Set Screws - Diamond Knurled Tip - Stainless Steel
Socket Set Screws - Diamond Knurled Tip - Stainless Steel

Search Rating: 34%

Also see combined categories:
All Diamond Knurled Tip Grub Screws
All Grub Screws

Grub screws that grip rough shafts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Diamond Knurled Tip - Stainless Steel.

Socket Set Screws - Flat Tip - Aligning - Stainless Steel
Socket Set Screws - Flat Tip - Aligning - Stainless Steel

Search Rating: 34%

Also see combined categories:
All Flat Ball Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Flat Tip - Aligning - Stainless Steel.

Socket Set Screws - Rolling Ball Tip - Stainless Steel
Socket Set Screws - Rolling Ball Tip - Stainless Steel

Search Rating: 34%

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Rolling Ball Tip - Stainless Steel.

Spacers

TopHide Pictures

Spacers - Round - Threaded
Spacers - Round - Threaded

Search Rating: 34%

Brass or 303 Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Round - Threaded.

Keys and Keysteel

TopHide Pictures

Keys - Machine - Stainless Steel
Keys - Machine - Stainless Steel

Search Rating: 34%

Also see combined categories:
All Machine Keys

Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keys - Machine - Stainless Steel.

Clamps

TopHide Pictures

Clamps - Gear - Screw Type
Clamps - Gear - Screw Type

Search Rating: 34%

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clamps - Gear - Screw Type.

Screws Socket Set (Grub Screws)

TopHide Pictures

Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916
Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916

Search Rating: 34%

Also see combined categories:
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916.

Spacers

TopHide Pictures

Standoffs - Round
Standoffs - Round

Search Rating: 34%

Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Standoffs - Round.

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Search Rating: 33%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Aluminium - Stainless 303.

Inserts - Self Tapping - For Plastics - Stainless 303
Inserts - Self Tapping - For Plastics - Stainless 303

Search Rating: 33%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Plastics - Stainless 303.

Knobs Precision

TopHide Pictures

Knobs - Precision - Knurled
Knobs - Precision - Knurled

Search Rating: 33%

Also see combined categories:
All Knurled Knobs
All Knobs

Set screw and clamp types - Stainless Steel. Also known as Thumb Knobs.

303 Stainless Steel. ID Tolerance +0.013 / -0.000 mm (+0.0005 / - 0.0000 inch).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Precision - Knurled.

Couplings Rigid

TopHide Pictures

Couplings - Rigid - Set Screw
Couplings - Rigid - Set Screw

Search Rating: 33%

Also see combined categories:
All Rigid Couplings

0.35 to 5.1 Nm. Includes steel, stainless steel, brass and aluminium.

Quality Class Precision: Bore Tolerance +0.013 / - 0.000 concentric within 0.0127mm T.I.R. Quality Class Commercial: Bore Tolerance +0.051 / -0.000.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Rigid - Set Screw.

Latches

TopHide Pictures

Latches - Draw - Over Centre - 300 Grade Stainless Steel
Latches - Draw - Over Centre - 300 Grade Stainless Steel

Search Rating: 33%

Passivated stainless steel. Latches mount with M4 screws, No. 8 screws or 5/32 rivets. Type B keeper uses a countersunk screw.

Keepers included. Type SC-97533 has a hole for a padlock.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Draw - Over Centre - 300 Grade Stainless Steel.

Pins Locating

TopHide Pictures

Pins - Locating - Spring - Stainless Pin - Unsealed
Pins - Locating - Spring - Stainless Pin - Unsealed

Search Rating: 33%

Also see combined categories:
All Locating Pins

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Locating - Spring - Stainless Pin - Unsealed.

Shim

TopHide Pictures

Feeler Gauge Stock - Stainless
Feeler Gauge Stock - Stainless

Search Rating: 32%

Used for close spacing and extremely tight tolerance situation.

Rc45-55 hardness. 300 grade stainless. Short flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 inches and can be easily cut to length. 12.7mm wide.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Feeler Gauge Stock - Stainless.

Collars

TopHide Pictures

Collars - Shaft - Standard - Stainless Steel
Collars - Shaft - Standard - Stainless Steel

Search Rating: 32%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Standard - Stainless Steel.

Latches

TopHide Pictures

Latches - Draw - T-Handle - Stainless Steel
Latches - Draw - T-Handle - Stainless Steel

Search Rating: 32%

Black rubber T Handle with stainless steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Draw - T-Handle - Stainless Steel.

Knobs Thumb

TopHide Pictures

Knobs - Thumb - With Cap Screw
Knobs - Thumb - With Cap Screw

Search Rating: 32%

Also see combined categories:
All Thumb Knobs
All Knobs

Four types and four colours.

Complete with high tensile alloy steel screw. If stainless steel screws required please order cap screws separately and knobs without screw.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Thumb - With Cap Screw.

Thread Inserts

TopHide Pictures

Inserts - Thread Repair - Recoil
Inserts - Thread Repair - Recoil

Search Rating: 31%

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.

Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Recoil.

Latches

TopHide Pictures

Latches - Adjustable Lever
Latches - Adjustable Lever

Search Rating: 31%

Die cast zinc with stainless steel springs and roll pins. Available in textured chrome or matte black powder coat. Working load 130kg. Ultimate load 210kg. M5 screws with lock washer supplied. Single hole installation.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable Lever.

Shaftloc

TopHide Pictures

Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Search Rating: 31%

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shaftloc-tm Sleeves - Single Ended.

Collars

TopHide Pictures

Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Search Rating: 31%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hinged - Stainless Steel.

Gears Imperial Spur

TopHide Pictures

Gears - Spur - 24DP - 20 Degree - Stainless
Gears - Spur -  24DP - 20 Degree - Stainless

Search Rating: 31%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. 303 Stainless Steel. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 24DP - 20 Degree - Stainless.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Air Springs Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Bar Batteries Bearings Acetal Bearings Angular C... Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale Bearings Thrust Bearings and Housi... Bearings for Denta... Bearings for Housings Bearings for Skating Bearings for Wheel... Belts PosiDrive Belts Rounthane Books

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Bottles and Cans Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Cable Ties Cam Followers Cams Carburettor Parts Carousels Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Circlips Clamping Bushings Clamping Rings Clamps Clevis Joints Clips Clutches Collars Collectibles Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Other Couplings Rigid Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Disk Cleaning Machine Drylin Bearings an...

Visa Card Accepted
Visa
Secure Checkout


Dual Eye Joints Dual Vee Bearings Easy Selection Kits Educational Projects Enclosures Engineering and Ho... Eyebolts Fastening Bushings Fishing Reel Parts Flexible Shaft Food Processor Parts Framing Fuel Games Amusement Games General Gas Springs Gear Blanks Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gearheads Inline Gearmotors Basic Gearmotors DC Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur

Master Card Accepted
Mastercard
Secure Checkout


Gears Imperial Worms Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Servo Motors Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings with Inte... Hubs ISOPADS Insulators Isolators Jigsaws Jockey Wheel Thrus... Keys Keys and Keysteel Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Precision Knobs Round

Pay By
Phone after Checkout
07 3275 2097
International +61 7 3275 2097


Knobs Star Knobs Thumb Knobs Tri Knobs Wing Lanyards Latches Lazy Susans Leadscrews Lifting Chain Lights Linear Slides Locking Compounds Lubricants General... MRI Table Bearings Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Marking Measuring Equipment Measuring Gauges Medical Motors DC Motors Stepper Motors Vibrating Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Nuts Lock ORings

Amex Accepted
Amex
Secure Checkout


ORings for Dental ... Oil Seals Packing Boxes and ... Parts Boxes Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Pins Locating Plungers Ball Plungers Indexing Plungers Spring Positioning Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Grooved Pulleys Idler Pulleys Vee Punches Pushbike Bearings Ratchets and Pawls Robotic Wheels Rod Ends Rollers Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach Screws Countersunk

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sets Shaft Extenders an... Shafting Aluminium Shafting General P... Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Soldering Spacers Special Effects Li... Splined Shafts and... Spring Anchors Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant F... Springs Die Springs Disc Springs Extension Springs General

Visa Card Accepted
Visa
Secure Checkout


Springs Torsion Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stationery Stays Stops Spring Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Swimming Pool Bear... Switches Tape Tee Joints Tension Bushings Tensioners Thread Thread Inserts Threaded Rod Timing Belt Lengths Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Tips Tolerance Rings Tooling Balls

Master Card Accepted
Mastercard
Secure Checkout


Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring Tools General Purpose Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Tube and Tubing Turntables Universal Joints VRings Vacuum Cleaner Belts Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers General Washers Lock Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 114228 products in 2801 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.