Pulleys Idler Categories
- from Miniature Bearings Australia Pty Ltd
Category Matches
Pulleys Idler
TopHide PicturesPulleys - Timing - Idler

Search Rating: 100%
Also see combined categories:
All Idler Pulleys
Complete with Needle Roller Bearing.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - Idler on Small Parts and Bearings.
Pulleys Grooved
TopHide PicturesPulleys - U Groove - Idler - Plastic - With Ball Bearing

Search Rating: 72%
Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys
Plastic and Steel with Steel Ball Bearings or Plain Bearings.
Use with round belts such as Rounthane or O-Rings.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pulleys - U Groove - Idler - Plastic - With Ball Bearing on Small Parts and Bearings.
Pulleys - U Groove - Idler - Plastic - With Plain Bore

Search Rating: 72%
Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys
Plastic and Steel with Steel Ball Bearings or Plain Bearings.
Use with round belts such as Rounthane or O-Rings.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pulleys - U Groove - Idler - Plastic - With Plain Bore on Small Parts and Bearings.
Pulleys - U Groove - Idler - Steel - With Bearing

Search Rating: 72%
Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys
Steel with Steel Ball Bearings
Use with round belts such as Rounthane or O-Rings.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pulleys - U Groove - Idler - Steel - With Bearing on Small Parts and Bearings.
Tensioners
TopHide PicturesTensioner - Adjustable Screw

Search Rating: 69%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. Uses a screw adjustment for positive precise tensioning.
Idler shaft and pulleys not included with tensioner.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Adjustable Screw on Small Parts and Bearings.
Tensioner - Fixed Angle

Search Rating: 69%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. Can be mounted on top of any flat surface to provide horizontal tenaioning.
Idler shaft and pulleys not included with tensioner.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Fixed Angle on Small Parts and Bearings.
Tensioner - Fixed Flanged

Search Rating: 69%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. Compact design allows mounting where space is limited.
Idler shaft and pulleys not included with tensioner.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Fixed Flanged on Small Parts and Bearings.
Tensioner - Horizontal Mount

Search Rating: 69%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. Has 88.9mm travel and is mounted 90o to the length of the part. Both ends are tapped so the shaft can be threaded on either side of the tensioner.
Idler shaft and pulleys not included with tensioner. Hole is tapped to accept 38.1mm diameter idler shaft (ordered separately).
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Horizontal Mount on Small Parts and Bearings.
Tensioner - Vertical Mount

Search Rating: 69%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. Has 88.9mm travel through the use of the vertical slot. Head is drilled and tapped to accept 38.1mm diameter idler shaft (ordered separately).
Idler shaft and pulleys not included with tensioner.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Vertical Mount on Small Parts and Bearings.
Tensioner - Drive - Adjustable Flanged

Search Rating: 68%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.
Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Drive - Adjustable Flanged on Small Parts and Bearings.
Tensioner - Heavy Duty - Type 2

Search Rating: 68%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).
Idler shaft and pulleys not included with tensioner. Shaft is mounted to the side at 90o and is anchored by set screws.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Heavy Duty - Type 2 on Small Parts and Bearings.
Tensioner - Heavy Duty - Type 3

Search Rating: 68%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).
Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Shaft is located in the centre of the tensioner between the adjusting slots.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Heavy Duty - Type 3 on Small Parts and Bearings.
Tensioner - Heavy Duty - Type 4

Search Rating: 68%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).
Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Adjusting slots are parallel to each other.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Heavy Duty - Type 4 on Small Parts and Bearings.
Tensioner - Drive - Double Adjust - Base Mount

Search Rating: 67%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. Adjusting slot assists with precise adjustments.
Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Drive - Double Adjust - Base Mount on Small Parts and Bearings.
Tensioner - Drive - Single Adjusting - Shaft Mount

Search Rating: 67%
Also see combined categories:
All Tensioner Arms
Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360o.
Idler shaft and pulleys not included with tensioner.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Drive - Single Adjusting - Shaft Mount on Small Parts and Bearings.
Shafting Precision Ground
TopHide PicturesShafts - Idler

Search Rating: 66%
Ready made precision ground idler shafts.
Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Shafts - Idler on Small Parts and Bearings.
Belts Rounthane
TopHide PicturesBelts - Rounthane

Search Rating: 52%
Joinable belting. 88 Shore A hardness. Yellow colour. Temperature range -31 to 65 Deg C (-25 to 150 Deg F).
Join with Rounthane Connectors (purchased separately). Material : Non Slip Polyurethane. Use with grooved idler pulleys with diameters at least 8 times the belt width. Purchased per 305mm (1 foot). Orders for more than 1 foot will be supplied as a continuous length. FDA / USDA approved.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Belts - Rounthane on Small Parts and Bearings.
Pulley Blocks
TopHide PicturesPulleys - Blocks - Eye - Fixed

Search Rating: 40%
Also see combined categories:
All Pulley Blocks
Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.
Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Blocks - Eye - Fixed on Small Parts and Bearings.
Other Store Pages
Click Page Banner Below
TopMain Pages
Click Page Banner Below
Top



Clearance

Contact



Distributors


Freight


Hobby




Payments

Privacy

Products



Technical

Terms
Top