latches 1-4 turn l handle with pawl black finish categories


Category Matches

Latches Other

TopHide Pictures

Catches - Straight Loop
Catches - Straight Loop

Search Rating: 20%

High strength overcentre catch and strike. Economical and compact. Available in plain steel, zinc plated or 304 stainless steel. With or without mounting holes. Strike is included. Dimensions are as mounted.

Tension can be increased by increasing distance between catch and strike.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Straight Loop.

Catches

TopHide Pictures

Catches - Snap In Style - Grabber -tm-
Catches - Snap In Style - Grabber -tm-

Search Rating: 18%

Fast economical installation.

Fits frames from 1.1 to 7.1mm thick. Installation hole size 15mm x 39.9mm. Push to close and pull to open. Spring loaded over centre action. Corrosion resistant black ABS with 303 stainless steel spring.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Snap In Style - Grabber -tm-.

Couplings Rigid

TopHide Pictures

Couplings - Rigid - 2 Piece Clamp - Steel
Couplings - Rigid - 2 Piece Clamp - Steel

Search Rating: 17%

Also see combined categories:
All Rigid Couplings

12L14 Steel

Precision Machined. High torsional load. Non marring, easy to install and adjust. Assemble without moving shafts. Use on hardened shafts, rigid clamp type design, easily machinable. Black finish with alloy steel cap screws. Available with stepped bores and keyways on 5 week delivery.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Rigid - 2 Piece Clamp - Steel.

Bearings Mounted

TopHide Pictures

Bearings - SDP - PTFE Filled Acetal - Flange Mounted
Bearings - SDP - PTFE Filled Acetal - Flange Mounted

Search Rating: 17%

Also see combined categories:
All Press In Bearings

Retainer : Carbon Steel Black Oxide Finish. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Self lubricating. Use any shaft material with 0.4 um or finer finish. Soft or hard shafting is OK.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - SDP - PTFE Filled Acetal - Flange Mounted.

Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning
Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning

Search Rating: 15%

Also see combined categories:
All Press In Bearings

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Stee black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Non aligning.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning.

Dental Handpiece Parts

TopHide Pictures

Black Pearl Friction Grip Bien Air Parts
Black Pearl Friction Grip Bien Air Parts

Search Rating: 14%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Black Pearl Friction Grip Bien Air Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Black Pearl Friction Grip Bien Air Parts.

Ball Screws Nook Series

TopHide Pictures

Ballscrew - Nook Series - Flanges
Ballscrew - Nook Series - Flanges

Search Rating: 14%

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ballscrew - Nook Series - Flanges.

Ballscrew - Nook Series - Right Hand
Ballscrew - Nook Series - Right Hand

Search Rating: 13%

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

High quality alloy steel, induction hardened to RC 56-60. Protective black oxide finish. Lead accurate by at least 0.00083mm per mm.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ballscrew - Nook Series - Right Hand.

Ballscrew - Nook Series - Nuts - Right Hand Thread - Double Circuit
Ballscrew - Nook Series - Nuts - Right Hand Thread - Double Circuit

Search Rating: 13%

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ballscrew - Nook Series - Nuts - Right Hand Thread - Double Circuit.

Ballscrew - Nook Series - Nuts - Right Hand Thread - Single Circuit
Ballscrew - Nook Series - Nuts - Right Hand Thread - Single Circuit

Search Rating: 13%

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ballscrew - Nook Series - Nuts - Right Hand Thread - Single Circuit.

Positioning

TopHide Pictures

Ball Slides and Crossed Roller Positioning Stages
Ball Slides and Crossed Roller Positioning Stages

Search Rating: 13%

Used for Gauging and Positioning Light to Medium Loads.

Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. Positioning Slides can be stacked for Multi axis applications. Preloaded positioning slides fully assemebled. Black Anodized Finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Slides and Crossed Roller Positioning Stages.

Catches

TopHide Pictures

Clamps - Lorenz
Clamps - Lorenz

Search Rating: 11%

Patented quick clamp is ideal for door openings on bins, hoppers, tanks and manholes. T-Handle allows torque without tools. The one piece unit is made from highly polished 304 stainless steel.

Full 50.8mm adjustment. 180o pivot when disengaged leaving access doorway unobstructed. Will not loosen through vibration. Brackets supplied for easy installation.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clamps - Lorenz.

Catches - Compression Spring
Catches - Compression Spring

Search Rating: 10%

Three internal compression springs supply up to 30kg of spring tension. Available as padlockable or with secondary catch.

Spring tension compensates for gasket set. Provides exact tension for water tight and air tight seals.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Compression Spring.

Catches - Draw Pull
Catches - Draw Pull

Search Rating: 10%

Draw pull catches are available in either steel or 304 stainless. Strike is included.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Draw Pull.

Catches - Knuckle
Catches - Knuckle

Search Rating: 10%

Strong and light polyacetal and polyamide. Holds cabinets secure with 7kg of pull force.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Knuckle.

Catches - Magnetic - Screw On
Catches - Magnetic - Screw On

Search Rating: 10%

Various styles - refer pictures


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Magnetic - Screw On.

Catches - Magnetic - Ultra Thin - Heavy Duty
Catches - Magnetic - Ultra Thin - Heavy Duty

Search Rating: 10%

Ultra thin strong magnetic catch is perfect for tight areas. Has a full 4kg of magnetic force.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Magnetic - Ultra Thin - Heavy Duty.

Catches - Magnetic - Ultra Thin - Light Duty
Catches - Magnetic - Ultra Thin - Light Duty

Search Rating: 10%

Ultra thin strong magnetic catch is perfect for tight areas. Has 2.5 kg of magnetic force.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Magnetic - Ultra Thin - Light Duty.

Catches - Roller
Catches - Roller

Search Rating: 10%

304 Stainless Steel and Polyurethane


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Roller.

Catches - Rotary
Catches - Rotary

Search Rating: 10%

Polyacetal catch and strike with polyethylene rollers. Ideal in corrosive environments.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Rotary.

Catches - Side Mount - Grabber -tm-
Catches - Side Mount - Grabber -tm-

Search Rating: 10%

Mounts inside your enclosure. Installs either right or left side by inverting. Use 4 gauge screws or 1/8in (3.125mm) rivets to install.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Side Mount - Grabber -tm-.

Catches - Side Mount - With Microswitch - Grabber -tm-
Catches - Side Mount - With Microswitch - Grabber -tm-

Search Rating: 10%

Mounts inside your enclosure. Installs either right or left side by inverting. Use 4 gauge screws or 1/8in (3.125mm) rivets to install.

Switch is designed to operate as an indicator light or form part of a non-safety related logic circuit.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Side Mount - With Microswitch - Grabber -tm-.

Eyebolts

TopHide Pictures

Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel
Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel

Search Rating: 9%

Also see combined categories:
All Eye Bolts

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel.

Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel

Search Rating: 9%

Also see combined categories:
All Eye Bolts

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel.

Fishing Reel Parts

TopHide Pictures

6600 BLACKMAX - PROMAX - SILVERMAX Abu Garcia Parts
6600 BLACKMAX - PROMAX - SILVERMAX Abu Garcia Parts

Search Rating: 9%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of 6600 BLACKMAX - PROMAX - SILVERMAX Abu Garcia Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 6600 BLACKMAX - PROMAX - SILVERMAX Abu Garcia Parts.

Bearings Press In

TopHide Pictures

Bearings - Press-Fit - Acetal - SDP
Bearings - Press-Fit - Acetal - SDP

Search Rating: 9%

Also see combined categories:
All Press In Bearings

Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Press-Fit - Acetal - SDP.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 123430 products in 2839 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.