Gears Spur 72dp Aluminium Categories


Category Matches

Gears Inch Spur

TopHide Pictures

Gears - Spur - 72DP - Aluminium
Gears - Spur -  72DP - Aluminium

Search Rating: 77%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 72DP - Aluminium.

Gears - Spur - 72DP - Differential End - Aluminium
Gears - Spur -  72DP - Differential End - Aluminium

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 72DP - Differential End - Aluminium.

Gears - Spur - 72DP - Hub Mounting - Aluminium
Gears - Spur -  72DP - Hub Mounting - Aluminium

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 72DP - Hub Mounting - Aluminium.

Gears - Spur - 72DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  72DP - Hub Mounting - Plastic with Aluminium Core

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 72DP - Hub Mounting - Plastic with Aluminium Core.

Gears - Spur - 120DP - Aluminium
Gears - Spur - 120DP - Aluminium

Search Rating: 75%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.212mm (1/120 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 120DP - Aluminium.

Gears - Spur - 64DP - Aluminium
Gears - Spur -  64DP - Aluminium

Search Rating: 75%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 64DP - Aluminium.

Gears - Spur - 80DP - Aluminium
Gears - Spur -  80DP - Aluminium

Search Rating: 75%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.318mm (1/80 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 80DP - Aluminium.

Gears - Spur - 96DP - Aluminium
Gears - Spur -  96DP - Aluminium

Search Rating: 75%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.265mm (1/96 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 96DP - Aluminium.

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.5 - Aluminium
Gears - Spur - Module 0.5 - Aluminium

Search Rating: 74%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Aluminium.

Gears - Spur - Module 0.8 - Aluminium
Gears - Spur - Module 0.8 - Aluminium

Search Rating: 74%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Aluminium.

Gears - Spur - Module 1 - Aluminium
Gears - Spur - Module 1 - Aluminium

Search Rating: 74%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. 2024 aluminium.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1 - Aluminium.

Gears Inch Spur

TopHide Pictures

Gears - Spur - 120DP - Hub Mounting - Aluminium
Gears - Spur - 120DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 120DP - Hub Mounting - Aluminium.

Gears - Spur - 24DP - 20 Degree - Aluminium
Gears - Spur -  24DP - 20 Degree - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 24DP - 20 Degree - Aluminium.

Gears - Spur - 24DP - Hub Mounting - Aluminium
Gears - Spur -  24DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 24DP - Hub Mounting - Aluminium.

Gears - Spur - 32DP - 20 Degree - Aluminium
Gears - Spur -  32DP - 20 Degree - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 32DP - 20 Degree - Aluminium.

Gears - Spur - 32DP - Hub Mounting - Aluminium
Gears - Spur -  32DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 32DP - Hub Mounting - Aluminium.

Gears - Spur - 48DP - 20 Degree - Aluminium
Gears - Spur -  48DP - 20 Degree - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 2024 and 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 48DP - 20 Degree - Aluminium.

Gears - Spur - 48DP - Differential End - Aluminium
Gears - Spur -  48DP - Differential End - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 48DP - Differential End - Aluminium.

Gears - Spur - 48DP - Hub Mounting - Aluminium
Gears - Spur -  48DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 48DP - Hub Mounting - Aluminium.

Gears - Spur - 64DP - Differential End - Aluminium
Gears - Spur -  64DP - Differential End - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 64DP - Differential End - Aluminium.

Gears - Spur - 64DP - Hub Mounting - Aluminium
Gears - Spur -  64DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 64DP - Hub Mounting - Aluminium.

Gears - Spur - 80DP - Hub Mounting - Aluminium
Gears - Spur -  80DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 80DP - Hub Mounting - Aluminium.

Gears - Spur - 96DP - Differential End - Aluminium
Gears - Spur -  96DP - Differential End - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 96DP - Differential End - Aluminium.

Gears - Spur - 96DP - Hub Mounting - Aluminium
Gears - Spur -  96DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 96DP - Hub Mounting - Aluminium.

Gears - Spur - 24DP - Hub Mounting - Plastic with Aluminium Core - No Hub
Gears - Spur -  24DP - Hub Mounting - Plastic with Aluminium Core - No Hub

Search Rating: 73%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 24DP - Hub Mounting - Plastic with Aluminium Core - No Hub.

Gears - Spur - 32DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  32DP - Hub Mounting - Plastic with Aluminium Core

Search Rating: 73%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal with aluminium core. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 32DP - Hub Mounting - Plastic with Aluminium Core.

Gears - Spur - 48DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  48DP - Hub Mounting - Plastic with Aluminium Core

Search Rating: 73%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 48DP - Hub Mounting - Plastic with Aluminium Core.

Gears - Spur - 64DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  64DP - Hub Mounting - Plastic with Aluminium Core

Search Rating: 73%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 64DP - Hub Mounting - Plastic with Aluminium Core.

Gears Inch Mitre

TopHide Pictures

Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets

Search Rating: 65%

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets.

Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets

Search Rating: 65%

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets.

Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets

Search Rating: 65%

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets.

Gears Inch Bevel

TopHide Pictures

Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets

Search Rating: 62%

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets.

Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets

Search Rating: 62%

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets.

Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets

Search Rating: 62%

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets.

Gearboxes Cross Axis

TopHide Pictures

Gearboxes - Cross Axis - 104 x 63 x 63
Gearboxes - Cross Axis - 104 x  63 x  63

Search Rating: 60%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 15mm Bores. E40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 104 x 63 x 63.

Gearboxes - Cross Axis - 130 x 80 x 80
Gearboxes - Cross Axis - 130 x  80 x  80

Search Rating: 60%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 20mm Bores. E50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 130 x 80 x 80.

Gearboxes - Cross Axis - 150 x 96 x 96 A
Gearboxes - Cross Axis - 150 x  96 x  96 A

Search Rating: 60%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 25mm Bores. E60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 150 x 96 x 96 A.

Gearboxes - Cross Axis - 52 x 34 x 34
Gearboxes - Cross Axis -  52 x  34 x  34

Search Rating: 60%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 6mm Bores. E20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel: Aluminium Bronze (CA104 / AB2). Circlips: Steel (not plated). Bearing: Steel 2RS (Rubber seals fitted).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 52 x 34 x 34.

Gearboxes - Cross Axis - 78 x 48 x 48
Gearboxes - Cross Axis -  78 x  48 x  48

Search Rating: 60%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 10mm Bores. E30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 78 x 48 x 48.

Gears Inch Racks

TopHide Pictures

Gear Racks - 72DP - Aluminium - Side Holes
Gear Racks -  72DP - Aluminium - Side Holes

Search Rating: 59%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

72 DP. Approx 1.11mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - 72DP - Aluminium - Side Holes.

Snaps

TopHide Pictures

Snaps - Swivel Eye - Aluminium
Snaps - Swivel Eye - Aluminium

Search Rating: 59%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snaps - Swivel Eye - Aluminium.

Couplings Disk

TopHide Pictures

Couplings - Double Disk - Aluminium
Couplings - Double Disk - Aluminium

Search Rating: 59%

Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Double Disk - Aluminium.

Rollers

TopHide Pictures

Rollers - Urethane Feed - With Hub
Rollers - Urethane Feed - With Hub

Search Rating: 59%

Also see combined categories:
All Tyred OD Bearings
All Rollers

Urethane coated aluminium alloy feed rollers with hub.

Roller - Urethane 60 Durometer, Ground Outside Diameter. Sleeve - Aluminium.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rollers - Urethane Feed - With Hub.

Linear Slides

TopHide Pictures

Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium
Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium

Search Rating: 58%

Use with Utilitrak PW Crowned Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium.

Gears Inch Internal

TopHide Pictures

Gears - Internal - 24 Diametrical Pitch - Aluminium
Gears - Internal - 24 Diametrical Pitch - Aluminium

Search Rating: 57%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Internal - 24 Diametrical Pitch - Aluminium.

Gears - Internal - 32 Diametrical Pitch - Aluminium
Gears - Internal - 32 Diametrical Pitch - Aluminium

Search Rating: 57%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Internal - 32 Diametrical Pitch - Aluminium.

Gears - Internal - 48 Diametrical Pitch - Aluminium
Gears - Internal - 48 Diametrical Pitch - Aluminium

Search Rating: 57%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Internal - 48 Diametrical Pitch - Aluminium.

Gears - Internal - 64 Diametrical Pitch - Aluminium
Gears - Internal - 64 Diametrical Pitch - Aluminium

Search Rating: 57%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Internal - 64 Diametrical Pitch - Aluminium.

Gears - Internal - 72 Diametrical Pitch - Aluminium
Gears - Internal - 72 Diametrical Pitch - Aluminium

Search Rating: 57%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Internal - 72 Diametrical Pitch - Aluminium.

Gears - Internal - 96 Diametrical Pitch - Aluminium
Gears - Internal - 96 Diametrical Pitch - Aluminium

Search Rating: 57%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Internal - 96 Diametrical Pitch - Aluminium.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Tee handle. Also called detent pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium.

Linear Slides

TopHide Pictures

Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium
Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium

Search Rating: 57%

Use with Utilitrak PW Dual Vee Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium.

Gears Inch Racks

TopHide Pictures

Gear Racks - 120DP - Aluminium - Side Holes
Gear Racks -  120DP - Aluminium - Side Holes

Search Rating: 57%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

120 DP. Approx 0.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - 120DP - Aluminium - Side Holes.

Gear Racks - 24DP - Aluminium - Side Holes
Gear Racks -  24DP - Aluminium - Side Holes

Search Rating: 57%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - 24DP - Aluminium - Side Holes.

Gear Racks - 32DP - Aluminium - Side Holes
Gear Racks -  32DP - Aluminium - Side Holes

Search Rating: 57%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - 32DP - Aluminium - Side Holes.

Gear Racks - 48DP - Aluminium - Side Holes
Gear Racks -  48DP - Aluminium - Side Holes

Search Rating: 57%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

48 DP. Approx 1.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - 48DP - Aluminium - Side Holes.

Gear Racks - 64DP - Aluminium - Side Holes
Gear Racks -  64DP - Aluminium - Side Holes

Search Rating: 57%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

64 DP. Approx 1.25mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - 64DP - Aluminium - Side Holes.

Gear Racks - 80DP - Aluminium - Side Holes
Gear Racks -  80DP - Aluminium - Side Holes

Search Rating: 57%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

80 DP. Approx 1.00mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - 80DP - Aluminium - Side Holes.

Gear Racks - 96DP - Aluminium - Side Holes
Gear Racks -  96DP - Aluminium - Side Holes

Search Rating: 57%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - 96DP - Aluminium - Side Holes.

Gears Inch Helical

TopHide Pictures

Gears - Helical - 48 Pitch - Aluminium
Gears - Helical - 48 Pitch - Aluminium

Search Rating: 57%

Also see combined categories:
All Imperial Helical Gears

2024 Aluminium


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Helical - 48 Pitch - Aluminium.

Gears Metric Mitre

TopHide Pictures

Gears - Mitre - Module 0.6 - Aluminium
Gears - Mitre - Module 0.6 - Aluminium

Search Rating: 57%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.6 - Aluminium.

Gears - Mitre - Module 1.5 - Aluminium
Gears - Mitre - Module 1.5 - Aluminium

Search Rating: 57%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1.5 - Aluminium.

Gears - Mitre - Module 1 - Aluminium
Gears - Mitre - Module 1 - Aluminium

Search Rating: 57%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1 - Aluminium.

Snaps

TopHide Pictures

Snaps - Double Pattern
Snaps - Double Pattern

Search Rating: 56%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snaps - Double Pattern.

Snaps - Swivel Trigger
Snaps - Swivel Trigger

Search Rating: 56%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snaps - Swivel Trigger.

Snaps - Swivel Body Decoy
Snaps - Swivel Body Decoy

Search Rating: 56%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snaps - Swivel Body Decoy.

Snaps - Swivel Eye Leash
Snaps - Swivel Eye Leash

Search Rating: 56%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snaps - Swivel Eye Leash.

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Search Rating: 56%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Aluminium - Steel.

Clamps

TopHide Pictures

Clamps - Gear - Split
Clamps - Gear - Split

Search Rating: 56%

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clamps - Gear - Split.

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Search Rating: 56%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Aluminium - Stainless 303.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Button Handle - Steel
Pins - Ball Lock - Button Handle - Steel

Search Rating: 55%

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium. Also called detent pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Button Handle - Steel.

Clamps

TopHide Pictures

Clamps - Gear - Screw Type
Clamps - Gear - Screw Type

Search Rating: 55%

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clamps - Gear - Screw Type.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Search Rating: 55%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Tee handle. Also called detent pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium.

Pins - Ball Lock - Ring Handle - Industrial - Steel
Pins - Ball Lock - Ring Handle - Industrial - Steel

Search Rating: 55%

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Ring Handle - Industrial - Steel.

Enclosures

TopHide Pictures

Enclosures - Aluminium - Economy
Enclosures - Aluminium - Economy

Search Rating: 55%

Also see combined categories:
All Enclosures

Great little boxes ready for you to adapt to your mechanical projects.

Excellent screening properties for EMI and RFI. Ideal for projects subject to weather. Great housings for mechanical projects. Easy to machine. 380 Die Cast aluminium alloy BS1490 LM24. Close fitting flanged lids.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Enclosures - Aluminium - Economy.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - L-Handle - Industrial - Steel
Pins - Ball Lock - L-Handle - Industrial - Steel

Search Rating: 55%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Also called detent pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - L-Handle - Industrial - Steel.

Couplings Sleeve

TopHide Pictures

Couplings - Sleeve Type - Hubs
Couplings - Sleeve Type - Hubs

Search Rating: 54%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Sleeve Type - Hubs.

Couplings - Sleeve Type - Sleeves
Couplings - Sleeve Type - Sleeves

Search Rating: 54%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Sleeve Type - Sleeves.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Machine - Cushioned
Mounts - Leveling - Machine - Cushioned

Search Rating: 54%

Also see combined categories:
All Mounting Feet

Reduces noise and vibration on heavy machinery, compressors and presses. Adjusters.

High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Machine - Cushioned.

Gear Racks Flexible

TopHide Pictures

Gear Racks - Flexible - Guide Rails
Gear Racks - Flexible - Guide Rails

Search Rating: 53%

Also see combined categories:
All Flexible Gear Racks

For mounting flexirack. Flexible nylon or rigid aluminium guide rails.

Longer lengths in Nylon available on special order. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Flexible - Guide Rails.

Pulleys Timing AT5 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Search Rating: 53%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore.

Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Search Rating: 53%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore.

Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 25mm Wide - Through Bore

Search Rating: 53%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore.

Pulleys Timing T01 1mm

TopHide Pictures

Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore
Pulleys - Timing -  1.000mm Pitch - 3mm Wide - Through Bore

Search Rating: 53%

Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy. With set screw.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore.

Pulleys - Timing - 1.000mm Pitch - 6mm Wide - Through Bore
Pulleys - Timing -  1.000mm Pitch - 6mm Wide - Through Bore

Search Rating: 53%

Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy. With set screw.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 1.000mm Pitch - 6mm Wide - Through Bore.

Pulleys Timing T10 10mm

TopHide Pictures

Pulleys - Timing - 10.000mm Pitch - T10 - 26mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - T10 - 26mm Wide - Through Bore

Search Rating: 53%

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit T10 Series belts

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 10.000mm Pitch - T10 - 26mm Wide - Through Bore.

Pulleys - Timing - 10.000mm Pitch - T10 - 32mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - T10 - 32mm Wide - Through Bore

Search Rating: 53%

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit T10 Series belts

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 10.000mm Pitch - T10 - 32mm Wide - Through Bore.

Pulleys - Timing - 10.000mm Pitch - T10 - 50mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - T10 - 50mm Wide - Through Bore

Search Rating: 53%

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit T10 Series belts

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 10.000mm Pitch - T10 - 50mm Wide - Through Bore.

Pulleys Timing GT2 2mm

TopHide Pictures

Pulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 3mm Wide - Through Bore

Search Rating: 52%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 2mm Pitch Timing Belts.

Aluminium Alloy. Finished Bores with Set Screws.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore.

Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - Through Bore

Search Rating: 51%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. Set Screw and EZI-LOK Hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore.

Pulleys - Timing - 2.000mm Pitch - GT2 - 9mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 9mm Wide - Through Bore

Search Rating: 51%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide.

Aluminium Alloy. Set Screw Locking.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 2.000mm Pitch - GT2 - 9mm Wide - Through Bore.

Pulleys Timing GT2 3mm

TopHide Pictures

Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 - 15mm Wide - Through Bore

Search Rating: 51%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 15mm Wide.

Aluminium Alloy. Finsihed through bore. Set screw locking.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore.

Pulleys - Timing - 3.000mm Pitch - GT2 - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 -  6mm Wide - Through Bore

Search Rating: 51%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 6mm Wide.

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 3.000mm Pitch - GT2 - 6mm Wide - Through Bore.

Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - EZ-Lock

Search Rating: 51%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.

Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock.

Gearboxes Cross Axis

TopHide Pictures

Gearboxes - Cross Axis - 18.8 x 13.5 x 12.0mm
Gearboxes - Cross Axis -  18.8 x  13.5 x 12.0mm

Search Rating: 51%

Also see combined categories:
All Cross Axis Gearboxes

PREM6 Series.

Gearbox Case: Aluminium 6082 T6. Gears: Steel 817M40T condition.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Cross Axis - 18.8 x 13.5 x 12.0mm.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - L-Handle - Industrial - Stainless Steel
Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Search Rating: 51%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Also called detent pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - L-Handle - Industrial - Stainless Steel.

Pulleys Timing GT2 2mm

TopHide Pictures

Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock Hub
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock Hub

Search Rating: 51%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock Hub.

Pulleys Timing GT2 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT2 - 15mm Wide - Through Bore

Search Rating: 50%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore.

Pulleys - Timing - 5.000mm Pitch - GT2 - 9mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT2 -  9mm Wide - Through Bore

Search Rating: 50%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 9mm wide. Aluminium, steel and cast iron.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 5.000mm Pitch - GT2 - 9mm Wide - Through Bore.

Pulleys Timing HTD 3mm

TopHide Pictures

Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 6mm Wide - Through Bore

Search Rating: 50%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 120906 products in 2840 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.