Categories that include the term: GEARBOXES
|
Gearboxes |  |
Educational Gearbox Kits (Relevance 10/10)
Basic gearbox kits for prototyping, testing and learning
|
Gearboxes - Bu-Ord - Size 11 - Double End (Relevance 10/10)
SRBO11 Series.
Items listed as Zero Backlash are for loads less than the ZB Torque Limit shown. Not recommended to be used as speed increasers - speed reducers only.
|
Gearboxes - Bu-Ord - Size 15 - Double End (Relevance 10/10)
SRBO15 Series.
Not recommended to be used as speed increasers - speed reducers only.
|
Gearboxes - Bu-Ord - Size 15 - Single End (Relevance 10/10)
SRBO15 Series.
Not recommended to be used as speed increasers - speed reducers only.
|
Gearboxes - Bu-Ord - Size 18 - Double End (Relevance 10/10)
SRBO18 Series.
Not recommended to be used as speed increasers - speed reducers only.
|
Gearboxes - Bu-Ord - Size 18 - Single End (Relevance 10/10)
SRBO18 Series.
Not recommended to be used as speed increasers - speed reducers only.
|
Gearboxes - Cross Axis - 18.8 x 13.5 x 12.0mm (Relevance 10/10)
PREM6 Series.
Gearbox Case: Aluminium 6082 T6. Gears: Steel 817M40T condition.
|
Gearboxes - Cross Axis - 38.9 x 31.8 x 19.1mm (Relevance 10/10)
Worm Gears - Precision.
Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F).
|
Gearboxes - Cross Axis - 47 x 40 x 22mm (Relevance 10/10)
Worm and Wormwheel box. 1.4 to 2.5Nm. 5:1 to 120:1 ratios. P20 and PF20.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 52 x 34 x 34 (Relevance 10/10)
Helical or Wormwheel Gears. 6mm Bores. E20 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel: Aluminium Bronze (CA104 / AB2). Circlips: Steel (not plated). Bearing: Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 52.4 x 44.5 x 25.4 (Relevance 10/10)
Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.
Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F).
|
Gearboxes - Cross Axis - 70 x 60 x 28mm (Relevance 10/10)
Worm and Wormwheel box. 2.5 to 8.8Nm. 5:1 to 120:1 ratios. P30 and PF30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 77.8 x 63.5 x 34.9 (Relevance 10/10)
Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.
Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F).
|
Gearboxes - Cross Axis - 78 x 48 x 48 (Relevance 10/10)
Helical or Wormwheel Gears. 10mm Bores. E30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 85.6 x 66.7 x 34.9 (Relevance 10/10)
Worm Gears - Commercial size 26.
Maximum input speed 1800 RPM. Approx weight 0.6 KG (20 oz).
|
Gearboxes - Cross Axis - 90 x 75 x 32mm (Relevance 10/10)
Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 104 x 63 x 63 (Relevance 10/10)
Helical or Wormwheel Gears. 15mm Bores. E40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 110 x 95 x 38mm (Relevance 10/10)
Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 130 x 80 x 80 (Relevance 10/10)
Helical or Wormwheel Gears. 20mm Bores. E50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 130 x 110 x 46mm (Relevance 10/10)
Worm and Wormwheel box. 13.4 to 57.0Nm. 5:1 to 120:1 ratios. P55 and PF55 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 136.5 x 111.1 x 63.5 (Relevance 10/10)
Worm gears.
Maximum input speed 1800 RPM. Approx weight 2.7 KG (6 lb).
|
Gearboxes - Cross Axis - 150 x 96 x 96 A (Relevance 10/10)
Helical or Wormwheel Gears. 25mm Bores. E60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 150 x 96 x 96 B (Relevance 10/10)
Helical or Wormwheel Gears. 30mm Bores. E60B Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 150 x 125 x 54mm (Relevance 10/10)
Worm and Wormwheel box. 30.0 to 118.0Nm. 5:1 to 120:1 ratios. P60 and PF60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 170 x 145 x 60mm (Relevance 10/10)
Worm and Wormwheel box. 38.0 to 164.0Nm. 5:1 to 120:1 ratios. P70 and PF70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Inline - 27 x 45mm (Relevance 10/10)
J27 Series. Miniature gearbox.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 60g. Backlash: Depends on ratio. Hours Life: 12000 hr. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 50 x 30mm (Relevance 10/10)
J51 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: J51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 50 x 40mm (Relevance 10/10)
J52 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 50 x 40mm Hi Torque (Relevance 10/10)
JHD51 Series.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: JHD51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 50 x 50mm (Relevance 10/10)
J53 Series.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 60 x 56mm (Relevance 10/10)
NT61 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 60 x 70mm (Relevance 10/10)
NT62 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 60 x 84mm (Relevance 10/10)
NT63 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 63 x 40mm (Relevance 10/10)
J64 Series.
End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 63 x 50mm (Relevance 10/10)
J65 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 63 x 60mm (Relevance 10/10)
J66 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 90 x 74mm (Relevance 10/10)
NT91 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 90 x 94mm (Relevance 10/10)
NT92 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 112.0 x 52.0 Low Backlash (Relevance 10/10)
Taper Gears - Weight: 1.50kg. TG112 Series.
Case: Anodised Aluminum 6082. Taper Gears: 817M40T High Carbon Steel. Weight: 1.50kg. Output Backlash: <= 8 arc/min at output. Max Input Speed: 3000 Rpm.
|
Gearboxes - Inline - 114 x 90mm (Relevance 10/10)
NT121 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 120 x 103mm (Relevance 10/10)
NTB121 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 1.63/3.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 120 x 120mm (Relevance 10/10)
NT122 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 120 x 160mm (Relevance 10/10)
NTB122 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 4/5kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - Epicyclic - 57.0 x 45.0 x 45.0mm (Relevance 10/10)
Servo Gearbox 3.4Nm to 7Nm ratios 3:1 - 6:1. EHD04 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 0.44kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Inline - Epicyclic - 78.0 x 60.0 x 60.0mm (Relevance 10/10)
Servo Gearbox 8Nm to 19Nm ratios 3:1 - 6:1. EHD06 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 0.96kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Inline - Epicyclic - 80.0 x 75.0 x 75.0mm (Relevance 10/10)
Servo Gearbox 20Nm to 50Nm ratios 3:1 - 6:1. EHD08 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 1.4kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Inline - Epicyclic - 115.0 x 75.0 x 75.0mm (Relevance 10/10)
Servo Gearbox 35Nm to 50Nm ratios 9:1 - 36:1. EHD08 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 2.1kg Backlash: 1°30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Inline - Epicyclic - 134.0 x 108.0mm (Relevance 10/10)
Servo Gearbox 60Nm to 140Nm ratios 3:1 - 6:1. EHD12 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Backlash: 30'. Max Input Speed: 3,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Inline - Epicyclic - 160.0 x 135.0mm (Relevance 10/10)
Servo Gearbox 180Nm to 380Nm ratios 3:1 - 6:1. EHD16 Series.
Case: Steel. Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 18.86kg Backlash: 30'. Max Input Speed: 2,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Light Duty - Base Mount (Relevance 10/10)
Approx weight 115 grams. Discontinued group. Minimum quantities will apply to manufacture.
Helical Gears. Brass Bearings. Backlash: 3 Deg Nominal - Max 8 Deg including endplay. Aluminium Alloy housing and base. Plated steel shafts.
|
Gearboxes - Light Duty - Panel Mount (Relevance 10/10)
Approx weight 115 grams. SRLP Series.
Helical Gears. Brass Bearings. Backlash: 3 Deg Nominal - Max 8 Deg including endplay. Aluminium Alloy housing. Plated steel shafts.
|
Gearboxes - Offset - 58 x 46 x 24 (Relevance 10/10)
FF10 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 0.226kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 60 x 60 (Relevance 10/10)
Base mounted. SRBM60 Series.
Die cast aluminium Housing. Steel Shafts. Bearings Input / Output : Ball / Sintered Bronze. Steel and Phenolic Gears. Shaft Play Radial / Thrust : <= 0.1mm / <=0.3mm. Operating Temp : -10 to 60 Deg C | Approx weight : 26 grams.
|
Gearboxes - Offset - 80 x 64 x 32 (Relevance 10/10)
FF15 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 0.55kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 117 x 100 x 48 (Relevance 10/10)
FF20 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 1.9kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 175 x 150 x 60 (Relevance 10/10)
FF30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight 5.5kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 236 x 190 x 90 (Relevance 10/10)
FF40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 310 x 240 x 100 (Relevance 10/10)
FF50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight 26.3kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Output Shafts (Relevance 10/10)
For use in Cross Axis gearboxes with bores. P and PF Series.
Stainless 303 shaft. Steel keys and circlips. P-X and P-DX types suitable for P and PF type gearboxes (cross axis types).
|
Gearboxes - Power - Mounting Feet (Relevance 10/10)
Optional mounting feet for power gearboxes.
Power gearboxes must be mounted firmly to the base because the power density is very high. The boxes can be mounyted using the 4 tapped holes in the unit. Optionally, these mounting feet can be used to provide more stability. Supplied in sets of 2 pieces with 4 screws.
|
Gearboxes - Power - Series FH (Relevance 10/10)
VP.FH Series.
Casing: Spheroidal graphite iron.
|
Gearboxes - Power - Series L (Relevance 10/10)
VP.L Series.
Casing: Spheroidal graphite iron.
|
Gearboxes - Power - Series L Reinforced Design (Relevance 10/10)
VX.L Series.
Casing: Spheroidal graphite iron. 1:1 Ratio only.
|
Gearboxes - Right Angle - 30.0 x 30.0 x 18.0mm (Relevance 10/10)
Economy Bevel Gear Type. Miniature gearbox.
Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.
|
Gearboxes - Right Angle - 30.5 x 30.5 x 18.7mm (Relevance 10/10)
Bevel Gears - 1:1 Ratio. B332 Series. Miniature gearbox.
1:1 Ratio Only / 4mm Shafts. Min Torque 0.5 Ncm. Backlash Approx 2 Degrees. Approx Max Temperature 80 Deg C. Suitable for manual and short term drive application.
|
Gearboxes - Right Angle - 36.5 x 36.5 x 29.4mm (Relevance 10/10)
1:1 ratio. GDRA Series. Miniature gearbox.
|
Gearboxes - Right Angle - 40.0 x 40.0 x 20.0mm (Relevance 10/10)
Mitre Gears 1:1 ratio. GDRA Series. Miniature gearbox.
Max Speed 3000 RPM. Max Backlash 1 Degree. Ball bearings both ends. Base mounting both sides.
|
Gearboxes - Right Angle - 40.0 x 40.0 x 25.0mm (Relevance 10/10)
BLH20 Series. Miniature gearbox.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 40.0 x 40.0 x 25.0mm (B) (Relevance 10/10)
Economy Bevel Gear Type. GDRA Series. Miniature gearbox.
Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.
|
Gearboxes - Right Angle - 50.0 x 50.0 x 30.0mm (Relevance 10/10)
Economy Bevel Gear Type. GDRA Series.
Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.
|
Gearboxes - Right Angle - 55.0 x 55.0 x 34.0mm (Relevance 10/10)
BLH30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 60.0 x 60.0 x 30.0mm (Relevance 10/10)
Mitre Gears 1:1 ratio. GDRA Series.
Max Speed 3000 RPM. Max Backlash 1 Degree. Ball bearings both ends. Base mounting both sides.
|
Gearboxes - Right Angle - 62.5 x 50.8 x 30.0mm (Relevance 10/10)
Bevel Gears - Plastic Housing. GDLBP Series.
Max Backlash 5 Degrees.
|
Gearboxes - Right Angle - 63.0 x 63.0 x 40.0mm (Relevance 10/10)
Economy Bevel Gear Type. GDRABE Series.
Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.
|
Gearboxes - Right Angle - 75.0 x 44.0 x 44.0mm (Relevance 10/10)
Bevel Gears - 1.6 Nm-5.0 Nm ratios 6:1 to 24:1. BLN20 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 75.0 x 75.0 x 44.0mm (Relevance 10/10)
BLH40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 80.0 x 80.0 x 40.0mm (Relevance 10/10)
Mitre Gears 1:1 ratio. GDRA Series.
Max Speed 3000 RPM. Max Backlash 1 Degree. Ball bearings both ends. Base mounting both sides.
|
Gearboxes - Right Angle - 82.0 x 62.0 x 40.0mm (Relevance 10/10)
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit weight 0.4kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Right Angle - 85.5 x 77.8 x 31.8mm (Relevance 10/10)
Bevel Gears - Plastic Housing. GDLBP Series.
Max Backlash 5 Degrees.
|
Gearboxes - Right Angle - 87.0 x 66.0 x 60.0mm (Relevance 10/10)
1 : 1 ratio only. BL18 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV. Weight: 1.3kg.
|
Gearboxes - Right Angle - 98.0 x 60.0 x 60.0mm (Relevance 10/10)
Bevel Gears - 5 Nm-15 Nm ratios 6:1 to 24:1. BLN30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 100.0 x 100.0 x 60.0mm (Relevance 10/10)
BLH50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 125.0 x 125.0 x 80.0mm (Relevance 10/10)
BLH60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 132.0 x 80.0 x 80.0mm (Relevance 10/10)
Bevel Gears - 13 Nm-43 Nm ratios 6:1 to 24:1. BLN40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 140.0 x 107.0 x 66.0mm (Relevance 10/10)
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit Weight 1.8kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Right Angle - 140.0 x 140.0 x 98.0mm (Relevance 10/10)
BLH70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 166.0 x 128.0 x 76.0mm (Relevance 10/10)
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit Weight 3.1kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Right Angle - 190.0 x 120.0 x 120.0mm (Relevance 10/10)
Bevel Gears - 40.6 Nm-110 Nm ratios 6:1 to 24:1. BLN50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 245.0 x 160.0 x 160.0mm (Relevance 10/10)
Bevel Gears - 86 Nm-270 Nm ratios 6:1 to 24:1. BLN60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 300.0 x 200.0 x 200.0mm (Relevance 10/10)
Bevel Gears - 215 Nm-550 Nm ratios 6:1 to 24:1. BLN70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 36.5 x 36.5 x 29.4mm (Relevance 10/10)
GDRAB Series. Miniature gearbox.
|
Gearboxes - Tee - 38.9 x 38.1 x 27.0mm A (Relevance 10/10)
Worm Gear. WG11 Series. Miniature gearbox.
Maximum input speed 2000 RPM. Maximum Backlash 5 Degrees. Worm Gears.
|
Gearboxes - Tee - 38.9 x 38.1 x 27.0mm B (Relevance 10/10)
1:1, 2:1 and 3:1 ratios. GDRA Series. Miniature gearbox.
Max Speed 2000 RPM. Max Backlash 5 Degrees. Bevel Gears.
|
Gearboxes - Tee - 40.0 x 40.0 x 25.0mm (Relevance 10/10)
BLHT20 Series. Miniature gearbox.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 55.0 x 40.0 x 25.0mm (Relevance 10/10)
Bevel Gears - 0.53 to 1.77 Nm. BLHM20 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 55.0 x 55.0 x 34.0mm (Relevance 10/10)
BLHT30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 62.5 x 50.8 x 30.0mm (Relevance 10/10)
Bevel Gears - Plastic Housing. GDLBP Series.
Max Backlash 5 Degrees.
|
Gearboxes - Tee - 65.0 x 50.0 x 50.0mm (Relevance 10/10)
BL8 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 70.0 x 70.0mm (Relevance 10/10)
Lengths from 90 to 120mm. BL15 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 74.0 x 55.0 x 34.0mm (Relevance 10/10)
Bevel Gears - 1.32 to 4.40 Nm. BLHM30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 75.0 x 50.0 x 50.0mm (Relevance 10/10)
BL8 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 75.0 x 75.0 x 44.0mm (Relevance 10/10)
BLHT40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 80.0 x 60.0 x 50.0mm (Relevance 10/10)
BL8 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 82.0 x 74.0 x 40.0mm (Relevance 10/10)
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit Weight 0.5kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Tee - 85.5 x 77.8 x 31.8mm (Relevance 10/10)
Bevel Gears - Plastic Housing. GDLBP Series.
Max Backlash 5 Degrees.
|
Gearboxes - Tee - 100.0 x 75.0 x 44.0mm (Relevance 10/10)
Bevel Gears - 3.0 to 10.3 Nm. BLHM40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 100.0 x 100.0 x 60.0mm (Relevance 10/10)
BLHT50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 125.0 x 125.0 x 80.0mm (Relevance 10/10)
BLHT60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 135.0 x 100.0 x 60.0mm (Relevance 10/10)
Bevel Gears - 7.7 to 30.0 Nm. BLHM50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 140.0 x 132.0 x 66.0mm (Relevance 10/10)
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit Weight 2.2kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Tee - 140.0 x 140.0 x 98.0mm (Relevance 10/10)
BLHT70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 166.0 x 160.0 x 76.0mm (Relevance 10/10)
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit Weight 3.4kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Tee - 170.0 x 125.0 x 80.0mm (Relevance 10/10)
Bevel Gears - 19.0 to 70.0 Nm. BLHM60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 180.0 x 140.0 x 98.0mm (Relevance 10/10)
Bevel Gears - 26.0 to 128.0 Nm. BLHM70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearmotors | |
Gearmotors - Basic - Hobby - 12.1mm Diameter (Relevance 10/10)
Small light weight geared motors used in toys and small solar applications
NOTE! These gearmotors do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.
|
Gearmotors - Basic - Hobby Kits (Relevance 10/10)
These gearmotor kits are of simple mainly plastic design. Great for making simple toys, hobbies or concept testing. Educational series.
|
Gearmotors - DC - Low Voltage (Relevance 10/10)
Reversible - Low Voltage - Self Starting.
Reversible. Low Voltage. Self Starting. Hosuing : Plastic / Shaft : Steel.
|
Gearmotors - DC - Size 12 (Relevance 10/10)
12mm Gearhead Body Diameter.
|
Gearmotors - DC - Size 20 Low Cost (Relevance 10/10)
20mm Gearhead Body Diameter. Low cost. 70 RPM Output Speed. One model only. Reversible.
|
Gearmotors - DC - Size 27 Low Cost (Relevance 10/10)
27mm Gearhead Body Diameter. Low cost. 36 RPM Output Speed. One model only. Reversible.
|
Gearmotors - DC - Size 37/350 Low Cost (Relevance 10/10)
37mm Gearhead Body Diameter. Low cost. 160 RPM Output Speed. One model only. Reversible.
|
Gearmotors - DC - Size 63 Ondrives (Relevance 10/10)
Commutation: Graphite, No. of Sectors: 12. Magnets: Ferrite, Gearbox Type: Planetary, Gearbox Bushes: Rotary. Efficiency per Stage: 85%, Backlash: <=1°, Maximum Axial Load: 500N. Maximum Radial Load at 12.5mm: 350N, Operating Temperature Range: -15°C to +100°C, Mass: 1.8 to 2.6kg. Performance data is based upon an operating temperature of 25°C.
|
Gearmotors - DC - Size 112 (Relevance 10/10)
112mm Gearhead Body - Low Backlash.
Weight: 3.50kg. Check motor data and gearbox chart for max. torque figures. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only. DUN80x80-24 DC Motor Included. Inline Gearbox TG112 series (112 x 55) included.
|
Gearmotors - DC PM - Size 29 (Relevance 10/10)
Permanent Magnet.
Max. Allowable Radial Load: 40N (10mm from mounting surface). Max. Allowable Axial Load: 15N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.
|
Gearmotors - DC PM - Size 30 (Relevance 10/10)
Permanent Magnet.
Max. Allowable Radial Load: 60N (10mm from mounting surface). Max. Allowable Axial Load: 20N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 7 segment commutator - RFI protection standard. High quality plastic gears - Terminal dimensions 2.8 x 0.5 - Weight: 180g.
|
Gearmotors - DC PM - Size 35 (Relevance 10/10)
Permanent Magnet.
Max. Allowable Radial Load: 60N (10mm from mounting surface). Max. Allowable Axial Load: 5N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 7 segment commutator - RFI protection standard. High quality plastic gears - Terminal dimensions 2.8 x 0.5 - Weight: 180g - Gear drive made of metal gears • Terminal dimensions 2.8 x 0.5 • Weight: 150g.
|
Gearmotors - DC PM - Size 47 (Relevance 10/10)
Permanent Magnet.
Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.
|
Gearmotors - DC PM - Size 70x114 (Relevance 10/10)
Permanent Magnet.
Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.
|
Gearmotors - DC PM - Size 70x129 (Relevance 10/10)
Permanent Magnet.
Max. Allowable Radial Load: 100N (20mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.5mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.
|
Gearmotors - Open Gear (Relevance 10/10)
Perfect for applications where inspection of the gears is important, educational purposes or for visual effects.
|
Gearmotors - Stepper - Nema Size 17 (Relevance 10/10)
Max Input Speed: 1000 rpm. Shaft Loading: Radial and axial = 1.78 kg. Shaft Play (Max): Radial = 0.05mm (0.002 in.), End = 0.254mm (0.010 in.). Phase Resistance: 3.3 ohms +/- 10% at 25 Deg C. 1.8 Deg Nominal Motor Step Angle.
|
Gearmotors - Stepper - Nema Size 23 (Relevance 10/10)
Max Input Speed: 1000 rpm. Shaft Loading: Radial and axial = 6.7 kg. Shaft Play (Max): Radial = 0.05mm (0.002 in.), End = 0.254mm (0.010 in.). Phase Resistance: 0.37 ohms +/- 10% at 25 Deg C. 1.8 Deg Nominal Motor Step Angle.
|
|
