About Us Brands Download Contact Counter Sales Distributors FAQ Freight Payments Products Search Site Technical More Links...

Gas Springs Adjustable Force Categories


Category Matches

Gas Springs

TopHide Pictures

Gas Springs - Adjustable Force
Gas Springs - Adjustable Force

Search Rating: 92%

Also see combined categories:
All Gas Springs


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gas Springs - Adjustable Force.

Latches

TopHide Pictures

Latches - Adjustable Lever
Latches - Adjustable Lever

Search Rating: 69%

Die cast zinc with stainless steel springs and roll pins. Available in textured chrome or matte black powder coat. Working load 130kg. Ultimate load 210kg. M5 screws with lock washer supplied. Single hole installation.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable Lever.

Circlips

TopHide Pictures

Circlips - External - Grooveless
Circlips - External - Grooveless

Search Rating: 50%

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Circlips - External - Grooveless.

Springs Constant Force

TopHide Pictures

Springs - Constant Force
Springs - Constant Force

Search Rating: 49%

301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Springs - Constant Force.

Gas Springs

TopHide Pictures

Gas Springs - Fixed Force
Gas Springs - Fixed Force

Search Rating: 48%

Also see combined categories:
All Gas Springs


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gas Springs - Fixed Force.

Springs Disc

TopHide Pictures

Washers - Disc Spring - Plastic
Washers - Disc Spring - Plastic

Search Rating: 45%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Disc Spring - Plastic.

Cams

TopHide Pictures

Cams - Adjustable
Cams - Adjustable

Search Rating: 44%

Also see combined categories:
All Cams

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cams - Adjustable.

Handles

TopHide Pictures

Handles - Adjustable - Stud
Handles - Adjustable - Stud

Search Rating: 44%

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Adjustable - Stud.

Latches

TopHide Pictures

Latches - Adjustable
Latches - Adjustable

Search Rating: 44%

These latches can be used in applications where variances occur. Zinc plated steel. Keepers need to be ordered separately. Either keeper can be used with either of the listed latches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable.

Latches - Adjustable - Catchbolt -tm-
Latches - Adjustable - Catchbolt -tm-

Search Rating: 44%

Holds firmly in three directions. Initial action pulls two parts together. As lever is latched an integral deadbolt slides into keeper forcing a panel or door to stay firmly in place with no movement in any direction.

Six mounting holes ar 4mm diameter. Latch height when closed is 18mm. 302/304 Stainless Steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable - Catchbolt -tm-.

Latches - Adjustable Draw - With Hook - Stainless
Latches - Adjustable Draw - With Hook - Stainless

Search Rating: 44%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated 300 Grade Stainless Steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable Draw - With Hook - Stainless.

Latches - Adjustable Draw - With Hook - Steel
Latches - Adjustable Draw - With Hook - Steel

Search Rating: 44%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated zinc plated steel with yellow vinyl grip.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable Draw - With Hook - Steel.

Latches - Adjustable Draw - With Keeper - Stainless
Latches - Adjustable Draw - With Keeper - Stainless

Search Rating: 44%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated 300 Grade Stainless Steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable Draw - With Keeper - Stainless.

Latches - Adjustable Draw - With Keeper - Steel
Latches - Adjustable Draw - With Keeper - Steel

Search Rating: 44%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated zinc plated Steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable Draw - With Keeper - Steel.

Latches - Adjustable Grip
Latches - Adjustable Grip

Search Rating: 44%

Made of carbon steel with black nylon knob. A quarter turn latches or unlatches. Knob includes pawl indicator to make sure pawl is in the proper position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable Grip.

Latches - Adjustable Grip - Miniature
Latches - Adjustable Grip - Miniature

Search Rating: 44%

Rugged construction. Single hole installation. Made from zinc plated steel.

Max working load 15kg. Ultimate load 40kg. Choice of black nylon head or low profile slotted head.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable Grip - Miniature.

Latches - Adjustable Grip With Arrowhead
Latches - Adjustable Grip With Arrowhead

Search Rating: 44%

Arrow designates position of pawl. Latch operates through 90o rotation with a positive lock stop at both extremes. Use in either clockwise or counterclockwise applications. Panel thickness from 1.6mm to 4.7mm.

Knob height is adjustable. Grip range 4.05mm to 28.2mm with pawk reversed.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable Grip With Arrowhead.

Latches - Adjustable - Junior ProLatch -tm-
Latches - Adjustable - Junior ProLatch -tm-

Search Rating: 44%

Ultimate breaking strength 145kg. Keeper must be ordered separately.

Zinc plated steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable - Junior ProLatch -tm-.

Latches - Adjustable - ProLatch -tm-
Latches - Adjustable - ProLatch -tm-

Search Rating: 44%

Ultimate breaking strength 310kg. Keeper must be ordered separately.

Zinc plated steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable - ProLatch -tm-.

Tensioners

TopHide Pictures

Tensioner - Adjustable Screw
Tensioner - Adjustable Screw

Search Rating: 44%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Uses a screw adjustment for positive precise tensioning.

Idler shaft and pulleys not included with tensioner.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Adjustable Screw.

Latches

TopHide Pictures

Latches - Toggle - Adjustable Grip
Latches - Toggle - Adjustable Grip

Search Rating: 44%

Adjustable grip. Ultimate strength 350kg. Working strength 260kg.

These adjustable grip toggle latches allow you to easily adjust both the grip length and lock tensions. The optional secondary latch prevents accidental opening. Made from cold rolled steel. Zinc plated with a bright chromate finish. Strikes need to be purchased separately.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Toggle - Adjustable Grip.

Pins - Clevis

TopHide Pictures

Pins - Clevis - Adjustable
Pins - Clevis - Adjustable

Search Rating: 44%

Also see combined categories:
All Clevis Pins - Adjustable

Multihole clevis pins for quick and easy adjustments

Made from 1010, 1018 or 1022 steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Clevis - Adjustable.

Lifting Chain

TopHide Pictures

Slings - Chain - Adjustable
Slings - Chain - Adjustable

Search Rating: 44%

Also see combined categories:
All Slings

Very easily adjustable chain slings. Ideal for machine shop or maintenance departments.

Made with grade 80 alloy chain. Proof tested and certified to comply with OSHA.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slings - Chain - Adjustable.

Tensioners

TopHide Pictures

Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Search Rating: 44%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Drive - Adjustable Flanged.

Shock Absorbers

TopHide Pictures

Shock Absorbers - Adjustable
Shock Absorbers - Adjustable

Search Rating: 44%

Also see combined categories:
All Shock Absorbers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shock Absorbers - Adjustable.

Shock Absorbers - Adjustable - Miniature
Shock Absorbers - Adjustable - Miniature

Search Rating: 44%

Also see combined categories:
All Shock Absorbers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shock Absorbers - Adjustable - Miniature.

Latches

TopHide Pictures

Latches - 110 Series - Adjustable Grip
Latches - 110 Series - Adjustable Grip

Search Rating: 43%

Ultimate strength 145kg. Working strength 120kg.

Strike needs to be ordered separately.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 110 Series - Adjustable Grip.

Latches - 200 Series - Adjustable Grip
Latches - 200 Series - Adjustable Grip

Search Rating: 43%

Ultimate strength 355kg. Working strength 265kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 200 Series - Adjustable Grip.

Shock Absorbers

TopHide Pictures

Shock Absorbers - Hydraulic - Adjustable - C-Jac
Shock Absorbers - Hydraulic - Adjustable - C-Jac

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shock Absorbers - Hydraulic - Adjustable - C-Jac.

Shock Absorbers - Hydraulic - Adjustable - Double Acting
Shock Absorbers - Hydraulic - Adjustable - Double Acting

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shock Absorbers - Hydraulic - Adjustable - Double Acting.

Shock Absorbers - Hydraulic - Adjustable - Low Profile
Shock Absorbers - Hydraulic - Adjustable - Low Profile

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shock Absorbers - Hydraulic - Adjustable - Low Profile.

Shock Absorbers - Hydraulic - Adjustable - Small
Shock Absorbers - Hydraulic - Adjustable - Small

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shock Absorbers - Hydraulic - Adjustable - Small.

Shock Absorbers - Full Threaded - Adjustable
Shock Absorbers - Full Threaded - Adjustable

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shock Absorbers - Full Threaded - Adjustable.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Large Handle
Plungers - Indexing - Large Handle

Search Rating: 43%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Extra large fluted handle for quick and easy plunger retraction. Can be fully retracted into the body by pulling up on the handle. Handle is black thermoplastic. Body and pin are steel with black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Large Handle.

Pins - Pull

TopHide Pictures

Pins - Pull - Round Handle - Steel
Pins - Pull - Round Handle - Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Round Handle - Steel.

Pins - Pull - Tee Handle - Steel
Pins - Pull - Tee Handle - Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Tee Handle - Steel.

Pins - Pull - Threaded End - Steel
Pins - Pull - Threaded End - Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Threaded End - Steel.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Non Locking - Steel
Plungers - Indexing - Non Locking - Steel

Search Rating: 43%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Non Locking - Steel.

Plungers - Indexing - Precision - Ball Grip
Plungers - Indexing - Precision - Ball Grip

Search Rating: 43%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Precision - Ball Grip.

Pins - Pull

TopHide Pictures

Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Round Handle - Stainless Steel.

Pins - Pull - Tee Handle - Stainless Steel
Pins - Pull - Tee Handle - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Tee Handle - Stainless Steel.

Pins - Pull - Threaded End - Stainless Steel
Pins - Pull - Threaded End - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Threaded End - Stainless Steel.

Shock Absorbers

TopHide Pictures

Shock Absorbers - Full Threaded - Low Velocity Adjustable
Shock Absorbers - Full Threaded - Low Velocity Adjustable

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shock Absorbers - Full Threaded - Low Velocity Adjustable.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Locking - With Knob - Steel
Plungers - Indexing - Locking - With Knob - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Locking - With Knob - Steel.

Plungers - Indexing - Locking - With Shoulder - Steel
Plungers - Indexing - Locking - With Shoulder - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Locking - With Shoulder - Steel.

Plungers - Indexing - Non Locking - Stainless Steel
Plungers - Indexing - Non Locking - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Non Locking - Stainless Steel.

Plungers - Indexing - Precision - Locking - Ball Grip
Plungers - Indexing - Precision - Locking - Ball Grip

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Precision - Locking - Ball Grip.

Pins - Pull

TopHide Pictures

Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Search Rating: 42%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Round Handle - Aluminium and Steel.

Pins - Pull - Tee Handle - Aluminium and Steel
Pins - Pull - Tee Handle - Aluminium and Steel

Search Rating: 42%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Tee Handle - Aluminium and Steel.

Pins - Pull - Threaded End - Aluminium and Steel
Pins - Pull - Threaded End - Aluminium and Steel

Search Rating: 42%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Threaded End - Aluminium and Steel.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Locking - With Mounting Plate - Steel
Plungers - Indexing - Locking - With Mounting Plate - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Locking - With Mounting Plate - Steel.

Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Plungers - Indexing - Locking - With Shoulder - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Locking - With Shoulder - Stainless Steel.

Plungers - Indexing - Non Locking - With Knob - Steel
Plungers - Indexing - Non Locking - With Knob - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Non Locking - With Knob - Steel.

Plungers - Indexing - Non Locking - Without Knob - Steel
Plungers - Indexing - Non Locking - Without Knob - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Non Locking - Without Knob - Steel.

Plungers - Indexing - Precision - With Support - Ball Grip
Plungers - Indexing - Precision - With Support - Ball Grip

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Precision - With Support - Ball Grip.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Elastomer Base - OSHA Yellow Steel Cover
Mounts - Leveling - Elastomer Base - OSHA Yellow Steel Cover

Search Rating: 42%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration. Adjusters.

Simplifies installation. 63.5mm of neoprene provides controlled deflections under load. High isolation efficiency for vibration and shock forces, and reduction of transmitted sound. Adjustable up to 12.7mm above loaded height by a few turns of the leveling bolt and tightening the checknut. Corrosion resistant outer housing provides high strength. Neoprene elastomer resists oil, grease, ozone and caustics. Zinc plated hardware resists rust. Hex head bolt and locknut finished with mounts. Height dimensions indicate free height of mount under no load.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Elastomer Base - OSHA Yellow Steel Cover.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Locking - With Knob - 303 stainless Steel
Plungers - Indexing - Locking - With Knob - 303 stainless Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Locking - With Knob - 303 stainless Steel.

Plungers - Indexing - Non Locking - With Mounting Plate - Steel
Plungers - Indexing - Non Locking - With Mounting Plate - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Non Locking - With Mounting Plate - Steel.

Plungers - Indexing - Precision - With Support - Locking - Ball Grip
Plungers - Indexing - Precision - With Support - Locking - Ball Grip

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Precision - With Support - Locking - Ball Grip.

Plungers - Indexing - Unthreaded - Non Locking - Steel - With Knob
Plungers - Indexing - Unthreaded - Non Locking - Steel - With Knob

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Unthreaded - Non Locking - Steel - With Knob.

Plungers - Indexing - Unthreaded - Non Locking - Steel - Without Knob
Plungers - Indexing - Unthreaded - Non Locking - Steel - Without Knob

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Unthreaded - Non Locking - Steel - Without Knob.

Latches

TopHide Pictures

Latches - Draw - Rotary Action - Link Lock
Latches - Draw - Rotary Action - Link Lock

Search Rating: 41%

Draws panels together with overcentre clamping force and slide travel of 11.9mm. Simply lift wing and twist to disengage. Available with spring loaded option for mounting hole irregularities or shock and vibration.

Type 300 stainless steel or steel with black UV resistant powder coat. Working load for stainless is 84kg. Working load for steel is 120kg. Keepers not included and must be purchased separately.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Draw - Rotary Action - Link Lock.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Air Springs Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Bar Batteries Bearings Acetal Bearings Angular C... Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale Bearings Thrust Bearings and Housi... Bearings for Denta... Bearings for Housings Bearings for Skating Bearings for Wheel... Belts PosiDrive Belts Rounthane Books

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Bottles and Cans Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Cable Ties Cam Followers Cams Carburettor Parts Carousels Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Circlips Clamping Bushings Clamping Rings Clamps Clevis Joints Clips Clutches Collars Collectibles Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Other Couplings Rigid Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Disk Cleaning Machine Drylin Bearings an...

Visa Card Accepted
Visa
Secure Checkout


Dual Eye Joints Dual Vee Bearings Easy Selection Kits Educational Projects Enclosures Engineering and Ho... Eyebolts Fastening Bushings Fishing Reel Parts Flexible Shaft Food Processor Parts Framing Fuel Games Amusement Games General Gas Springs Gear Blanks Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gearheads Inline Gearmotors Basic Gearmotors DC Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur

Master Card Accepted
Mastercard
Secure Checkout


Gears Imperial Worms Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Servo Motors Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings with Inte... Hubs ISOPADS Insulators Isolators Jigsaws Jockey Wheel Thrus... Keys Keys and Keysteel Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Precision Knobs Round

Pay By
Phone after Checkout
07 3275 2097
International +61 7 3275 2097


Knobs Star Knobs Thumb Knobs Tri Knobs Wing Lanyards Latches Lazy Susans Leadscrews Lifting Chain Lights Linear Slides Locking Compounds Lubricants General... MRI Table Bearings Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Marking Measuring Equipment Measuring Gauges Medical Motors DC Motors Stepper Motors Vibrating Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Nuts Lock ORings

Amex Accepted
Amex
Secure Checkout


ORings for Dental ... Oil Seals Packing Boxes and ... Parts Boxes Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Pins Locating Plungers Ball Plungers Indexing Plungers Spring Positioning Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Grooved Pulleys Idler Pulleys Vee Punches Pushbike Bearings Ratchets and Pawls Robotic Wheels Rod Ends Rollers Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach Screws Countersunk

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sets Shaft Extenders an... Shafting Aluminium Shafting General P... Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Soldering Spacers Special Effects Li... Splined Shafts and... Spring Anchors Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant F... Springs Die Springs Disc Springs Extension Springs General

Visa Card Accepted
Visa
Secure Checkout


Springs Torsion Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stationery Stays Stops Spring Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Swimming Pool Bear... Switches Tape Tee Joints Tension Bushings Tensioners Thread Thread Inserts Threaded Rod Timing Belt Lengths Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Tips Tolerance Rings Tooling Balls

Master Card Accepted
Mastercard
Secure Checkout


Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring Tools General Purpose Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Tube and Tubing Turntables Universal Joints VRings Vacuum Cleaner Belts Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers General Washers Lock Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 114228 products in 2801 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.