coupling low speed kavo parts categories


Category Matches

Couplings Sleeve

TopHide Pictures

Couplings - Sleeve Type - Hubs
Couplings - Sleeve Type - Hubs

Search Rating: 52%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Sleeve Type - Hubs.

Couplings - Sleeve Type - Sleeves
Couplings - Sleeve Type - Sleeves

Search Rating: 52%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Sleeve Type - Sleeves.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Oldham - Hubs - Clamp Style
Couplings - Oldham - Hubs - Clamp Style

Search Rating: 51%

Also see combined categories:
All Insert and Jaw Type Couplings
All Oldham Hubs

0.06 to 44 Nm. Max Speed: 3000 RPM.

Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Oldham - Hubs - Clamp Style.

Couplings - Oldham - Disks for Clamp Style
Couplings - Oldham - Disks for Clamp Style

Search Rating: 51%

Also see combined categories:
All Insert and Jaw Type Couplings
All Oldham Disks

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Oldham - Disks for Clamp Style.

Couplings - Oldham - Complete - Acetal Disk - Set Screw
Couplings - Oldham - Complete - Acetal Disk - Set Screw

Search Rating: 51%

Also see combined categories:
All Insert and Jaw Type Couplings

0.06 to 44 Nm. Max Speed: 3000 RPM.

Max Speed: 3000 RPM. Parallel out of line compensation. Temp Range -20 oC to +60 oC. Oldham couplings are designed to transfer torque between two parallel, but not colinear, shafts. They have three discs, one coupled to the input, one coupled to the output, and a centre disc that is joined to the first two by tongue and grooves. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Oldham - Complete - Acetal Disk - Set Screw.

Dental Handpiece Parts

TopHide Pictures

Coupling - Multiflex Kavo Parts
Coupling - Multiflex Kavo Parts

Search Rating: 45%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Coupling - Multiflex Kavo Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Coupling - Multiflex Kavo Parts.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Spider Type B - Complete
Couplings - Spider Type B - Complete

Search Rating: 45%

Also see combined categories:
All Insert and Jaw Type Couplings

Max 3600 RPM. 0.39 to 16.27 Nm. Match only hubs and spiders from listings SPIDER TYPE B. Insert is set between the jaws of two hubs.

Angular Offset = 1 Deg. Max. Parallel Offset = 0.381mm Max. Max Recommended Speed 3600 RPM. Rubber spider and metal hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Spider Type B - Complete.

Dental Handpiece Parts

TopHide Pictures

Multiflex Coupling Kavo Parts
Multiflex Coupling Kavo Parts

Search Rating: 45%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Multiflex Coupling Kavo Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Multiflex Coupling Kavo Parts.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Spider Type B - Hubs Only
Couplings - Spider Type B - Hubs Only

Search Rating: 45%

Match 2 hubs with a spider from the spiders category. Match only rubber spiders from listings SPIDER TYPE B. Insert is set between the jaws of two hubs.

Angular Offset = 1 Deg. Max. Parallel Offset = 0.381mm Max. Max Recommended Speed 3600 RPM. Metal hubs to suit rubber spiders type B.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Spider Type B - Hubs Only.

Couplings - Three Jaw Type - Inserts
Couplings - Three Jaw Type - Inserts

Search Rating: 42%

Match with Three Jaw Type hubs by OD

Use Bost-Bronz inserts for high torque loads at slower speeds. Use rubber for quiter operation. Use polyurethane for moderate to heavy shock loads.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Three Jaw Type - Inserts.

Couplings Helical and Slit

TopHide Pictures

Couplings - Helical - Low Inertia
Couplings - Helical - Low Inertia

Search Rating: 37%

Also see combined categories:
All Helical and Slit Couplings

0.8 to 13.2 Nm.

5o max angular misalignment. 0.254 mm Parallel offset. +/- 0.203 mm Axial motion. Zero backlash.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Helical - Low Inertia.

Couplings - Helical - Economy
Couplings - Helical - Economy

Search Rating: 37%

Also see combined categories:
All Helical and Slit Couplings

Low cost aluminium couplings primarily used for 3D printer stepper motors

Max. Ang Misalignment 5o. Max Parallel Offset 0.25mm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Helical - Economy.

Couplings Other

TopHide Pictures

Couplings - Crowned Tooth Gear - Hubs Only
Couplings - Crowned Tooth Gear - Hubs Only

Search Rating: 36%

Match with sleeves from the sleeves category

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Crowned Tooth Gear - Hubs Only.

Couplings - Crowned Tooth Gear - Sleeve Only
Couplings - Crowned Tooth Gear - Sleeve Only

Search Rating: 36%

Match with hubs from the hubs category

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Crowned Tooth Gear - Sleeve Only.

Bearings PEEK

TopHide Pictures

Bearings - Peek - with Glass Balls
Bearings - Peek - with Glass Balls

Search Rating: 34%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from PEEK - Balls made from Ground Glass - Cages from Acetal or Nylon.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Peek - with Glass Balls.

Universal Joints Single

TopHide Pictures

Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless

Search Rating: 34%

Also see combined categories:
All Universal Joints
All Single Joint Universals

303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Universal Joints - Single Joint - High Speed - Plain Bore - Stainless.

Gearboxes Inline

TopHide Pictures

Gearboxes - Inline - 112.0 x 52.0 Low Backlash
Gearboxes - Inline - 112.0 x  52.0 Low Backlash

Search Rating: 33%

Also see combined categories:
All Inline Gearboxes

Taper Gears - Weight: 1.50kg. TG112 Series.

Case: Anodised Aluminum 6082. Taper Gears: 817M40T High Carbon Steel. Weight: 1.50kg. Output Backlash: Less than 8.1 arc/min at output. Max Input Speed: 3000 Rpm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Inline - 112.0 x 52.0 Low Backlash.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Double Row - with Glass Balls
Bearings - Acetal - Double Row - with Glass Balls

Search Rating: 33%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Double Row - with Glass Balls.

Bearings - Acetal - Single Row - with Glass Balls
Bearings - Acetal - Single Row - with Glass Balls

Search Rating: 33%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with Glass Balls.

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Search Rating: 33%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Search Rating: 33%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Search Rating: 33%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls.

Bearings Ceramic

TopHide Pictures

Bearings - Ceramic Si3N4 - Radial
Bearings - Ceramic Si3N4 - Radial

Search Rating: 32%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ceramic Si3N4 - Radial.

Bearings - Ceramic Si3N4 - Angular Contact
Bearings - Ceramic Si3N4 - Angular Contact

Search Rating: 32%

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ceramic Si3N4 - Angular Contact.

Bearings - Ceramic ZrO2 - Radial
Bearings - Ceramic ZrO2 - Radial

Search Rating: 32%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ceramic ZrO2 - Radial.

Dental Handpiece Parts

TopHide Pictures

282A Slow Speed Kavo Parts
282A Slow Speed Kavo Parts

Search Rating: 32%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of 282A Slow Speed Kavo Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 282A Slow Speed Kavo Parts.

Bearings Ceramic

TopHide Pictures

Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Search Rating: 31%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row.

Dental Handpiece Parts

TopHide Pictures

Slow Speed 40000 RPM Beaver Parts
Slow Speed 40000 RPM Beaver Parts

Search Rating: 31%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slow Speed 40000 RPM Beaver Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Slow Speed 40000 RPM Beaver Parts.

NPB Slow Speed NSK Parts
NPB Slow Speed NSK Parts

Search Rating: 31%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of NPB Slow Speed NSK Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of NPB Slow Speed NSK Parts.

E4R Slow Speed - Contra Angle Green Band NSK Parts
E4R Slow Speed - Contra Angle Green Band NSK Parts

Search Rating: 31%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of E4R Slow Speed - Contra Angle Green Band NSK Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of E4R Slow Speed - Contra Angle Green Band NSK Parts.

Couplings Bellows

TopHide Pictures

Couplings - Bellows - Set Screw - 316 Stainless
Couplings - Bellows - Set Screw - 316 Stainless

Search Rating: 30%

Also see combined categories:
All Bellows Couplings

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Stainless Steel 303L Bellows. Stainless Steel 316 Hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Bellows - Set Screw - 316 Stainless.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Spider Type C - Complete
Couplings - Spider Type C - Complete

Search Rating: 30%

Also see combined categories:
All Insert and Jaw Type Couplings

Miniature aluminium curved jaw flexible couplings. 2 to 160 Nm. Match only hubs and spiders from listings SPIDER TYPE C. Inserts are held between the jaws of two hubs.

Discs (either red as standard with blue or white optional) are available to purchase separately. Flexible couplings transmit torque and rotational angle while absorbing misalignment. When the misalignment exceeds allowable values, vibration may result or the life of the coupling may become shortened. Zero backlash in low torque application, made capable by having the hubs pressed in a spacer. Can be used as a flexible coupling in a high torque application. Polyurethane spider.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Spider Type C - Complete.

Linear Slides

TopHide Pictures

Linear Guide System - Low Profile - Size 17
Linear Guide System - Low Profile - Size 17

Search Rating: 28%

Also see combined categories:
All Linear Slides

Carriage Assembly and Rails sold separately. Listed in the same category.

Low-Load applications. Max load 50N. Self Lubricating. Corrosion Resistant. Low Friction. Max Speed 15 m/s. Operating Temp -40o to 90o Celius.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Guide System - Low Profile - Size 17.

Bushes Plastic

TopHide Pictures

Bushes - Plastic - Iglidur A200 - Flanged
Bushes - Plastic - Iglidur A200 - Flanged

Search Rating: 28%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Food grade for low speeds and direct contact with food and pharmaceuticals.

Specific Gravity 1.14 g/cm3. Operating Temp 170 C short term / 80 C long term. Tensile Strength at 20 oC = 116 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is D11 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Iglidur A200 - Flanged.

Bushes - Plastic - Iglidur A200 - Unflanged
Bushes - Plastic - Iglidur A200 - Unflanged

Search Rating: 28%

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

Food grade for low speeds and direct contact with food and pharmaceuticals.

Specific Gravity 1.14 g/cm3. Operating Temp 170 C short term / 80 C long term. Tensile Strength at 20 oC = 116 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is D11 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Iglidur A200 - Unflanged.

Bushes - Plastic - Iglidur A290 - Flanged
Bushes - Plastic - Iglidur A290 - Flanged

Search Rating: 28%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Food grade for low speeds and direct contact with food and pharmaceuticals.

Specific Gravity 1.39 g/cm3. Operating Temp 180 C short term / 140 C long term. Tensile Strength at 20 oC = 250 Mpa. Hardness 88 Shore D (DIN53505). Bushing bore tolerance is D11 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Iglidur A290 - Flanged.

Bushes - Plastic - Iglidur A290 - Unflanged
Bushes - Plastic - Iglidur A290 - Unflanged

Search Rating: 28%

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

Food grade for low speeds and direct contact with food and pharmaceuticals.

Specific Gravity 1.39 g/cm3. Operating Temp 180 C short term / 140 C long term. Tensile Strength at 20 oC = 250 Mpa. Hardness 88 Shore D (DIN53505). Bushing bore tolerance is D11 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Iglidur A290 - Unflanged.

Dental Handpiece Parts

TopHide Pictures

True Speed DME Parts
True Speed DME Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of True Speed DME Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of True Speed DME Parts.

High Speed Handpiece Impact-Air Parts
High Speed Handpiece Impact-Air Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of High Speed Handpiece Impact-Air Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of High Speed Handpiece Impact-Air Parts.

Fishing Reel Parts

TopHide Pictures

80T Single Speed Penn Parts
80T Single Speed Penn Parts

Search Rating: 27%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of 80T Single Speed Penn Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 80T Single Speed Penn Parts.

Couplings Disk

TopHide Pictures

Couplings - Double Disk - Aluminium
Couplings - Double Disk - Aluminium

Search Rating: 27%

Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Double Disk - Aluminium.

Couplings Geargrip

TopHide Pictures

Couplings - Geargrip - Precision - Hubs Only
Couplings - Geargrip - Precision - Hubs Only

Search Rating: 27%

Match with sleeves from sleeves category

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Geargrip - Precision - Hubs Only.

Couplings - Geargrip - Precision - Sleeves Only
Couplings - Geargrip - Precision - Sleeves Only

Search Rating: 27%

Match with hubs from hubs category

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Geargrip - Precision - Sleeves Only.

Couplings Helical and Slit

TopHide Pictures

Couplings - Flex Beam - Clamp Style
Couplings - Flex Beam - Clamp Style

Search Rating: 27%

Also see combined categories:
All Helical and Slit Couplings

Zero backlash machined from a single piece of aluminium and featuring two sets of spiral cuts.

Higher torque and reduced windup compared to commodity type single beam couplings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Flex Beam - Clamp Style.

Couplings - Flex Beam - Set Screw Style
Couplings - Flex Beam - Set Screw Style

Search Rating: 27%

Also see combined categories:
All Helical and Slit Couplings

Zero backlash machined from a single piece of aluminium and featuring two sets of spiral cuts.

Higher torque and reduced windup compared to commodity type single beam couplings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Flex Beam - Set Screw Style.

Couplings - Helical - Long Series
Couplings - Helical - Long Series

Search Rating: 27%

Also see combined categories:
All Helical and Slit Couplings

2.9 to 31.4 Nm.

5o max angular misalignment. 0.762 mm Parallel offset. +/- 0.254 mm Axial motion. Zero backlash.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Helical - Long Series.

Couplings - Helical - Precision
Couplings - Helical - Precision

Search Rating: 27%

Also see combined categories:
All Helical and Slit Couplings

0.14 to 9 Nm. 25000 max RPM.

5o max angular misalignment. 0.076 mm Parallel offset. Zero Axial motion. Zero backlash.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Helical - Precision.

Couplings - Helical - Standard
Couplings - Helical - Standard

Search Rating: 27%

Also see combined categories:
All Helical and Slit Couplings

0.1 to 16.2 Nm.

Zero backlash. Max. Ang Misalignment 5o. Max Parallel Offset 0.25mm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Helical - Standard.

Couplings - Reli-a-flex - Long Series - Clamp Type
Couplings - Reli-a-flex - Long Series - Clamp Type

Search Rating: 27%

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Reli-a-flex - Long Series - Clamp Type.

Couplings - Reli-a-flex - Short Series - Clamp Type
Couplings - Reli-a-flex - Short Series - Clamp Type

Search Rating: 27%

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Reli-a-flex - Short Series - Clamp Type.

Couplings - Reli-a-flex - Short Series - Set Screw Type
Couplings - Reli-a-flex - Short Series - Set Screw Type

Search Rating: 27%

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Reli-a-flex - Short Series - Set Screw Type.

Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Aluminium
Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Aluminium

Search Rating: 27%

Also see combined categories:
All Helical and Slit Couplings

Aluminium - Flexible.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Aluminium.

Couplings - Slit Type - Standard
Couplings - Slit Type - Standard

Search Rating: 27%

Also see combined categories:
All Helical and Slit Couplings

Aluminium - Stainless Steel - Flexible - Zero Backlash. 0.1 to 35 Nm. 2400 to 48000 rpm.

High Torsional Stiffness. Zero Backlash.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Slit Type - Standard.

Couplings Insert and Jaw

TopHide Pictures

Couplings - HRC
Couplings - HRC

Search Rating: 27%

Also see combined categories:
All Insert and Jaw Type Couplings

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - HRC.

Couplings - Spline Type - Complete
Couplings - Spline Type - Complete

Search Rating: 27%

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Spline Type - Complete.

Couplings - Spline Type - Spare Hubs
Couplings - Spline Type - Spare Hubs

Search Rating: 27%

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Spline Type - Spare Hubs.

Couplings - Spline Type - Spare Poyurethane Splines
Couplings - Spline Type - Spare Poyurethane Splines

Search Rating: 27%

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Spline Type - Spare Poyurethane Splines.

Couplings - Three Jaw Type - Hubs
Couplings - Three Jaw Type - Hubs

Search Rating: 27%

Match with Three Jaw Type inserts by OD. Two Hubs and one insert will be needed to make a complete coupling.

Complete with keyway and set screw. No lubrication needed.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Three Jaw Type - Hubs.

Couplings K Type

TopHide Pictures

Couplings - K Type
Couplings - K Type

Search Rating: 27%

Up to 3600 RPM - Minus 20 to Plus 60o C. 0.34 to 18 Nm.

Strong, flexible polyurethane or Hyrtel(R) is cut and tear resistant. Up to 3600 RPM. Urethane: Minus 20 to Plus 60o C / Hyrtel(R) : Minus 40 to Plus 100o C. Precision swaged mechanically crimped hubs. Annealed steel hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - K Type.

Couplings Other

TopHide Pictures

Couplings - BoWex - Junior
Couplings - BoWex - Junior

Search Rating: 27%

Nylon 2 piece and 3 piece couplings. 5 to 24 Nm. 6000 rpm max.

Approved distribution through the Australian Wholesaler (Deanquip). Crowned gear teeth - No need for lubrication. Chemical resistant nylon. Electrically insulated. Grub Screw opposite Keyway.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - BoWex - Junior.

Couplings - Eccentric Drive
Couplings - Eccentric Drive

Search Rating: 27%

1.88mm bore press fits most standard hobby motors (2mm shaft)


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Eccentric Drive.

Couplings - Neo-Flex
Couplings - Neo-Flex

Search Rating: 27%

0.71 to 1.27 Nm.

303 stainless steel with 73 durometer neoprene centre. Shaft to shaft insulation. Torsional vibration isolation. Ribbed style are more flexible than smooth style. Bore Tolerances: +0.025 / -0.000.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Neo-Flex.

Couplings Rigid

TopHide Pictures

Couplings - Rigid - 1 Piece Clamp - Aluminium
Couplings - Rigid - 1 Piece Clamp - Aluminium

Search Rating: 27%


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Rigid - 1 Piece Clamp - Aluminium.

Couplings - Rigid - 1 Piece Clamp - Stainless Steel
Couplings - Rigid - 1 Piece Clamp - Stainless Steel

Search Rating: 27%

Also see combined categories:
All Rigid Couplings

303 Grade Stainless

Precision Machined. High torsional load. Non marring, easy to install and adjust. Use on hardened shafts, rigid clamp type design, easily machinable. Available with stepped bores and keyways on 5 week delivery.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Rigid - 1 Piece Clamp - Stainless Steel.

Couplings - Rigid - 1 Piece Clamp - Steel
Couplings - Rigid - 1 Piece Clamp - Steel

Search Rating: 27%

12L14 Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Rigid - 1 Piece Clamp - Steel.

Couplings - Rigid - 2 Piece Clamp - Steel
Couplings - Rigid - 2 Piece Clamp - Steel

Search Rating: 27%

Also see combined categories:
All Rigid Couplings

12L14 Steel

Precision Machined. High torsional load. Non marring, easy to install and adjust. Assemble without moving shafts. Use on hardened shafts, rigid clamp type design, easily machinable. Black finish with alloy steel cap screws. Available with stepped bores and keyways on 5 week delivery.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Rigid - 2 Piece Clamp - Steel.

Couplings - Rigid - Hobby - Brass
Couplings - Rigid - Hobby - Brass

Search Rating: 27%

Also see combined categories:
All Rigid Couplings

A selection of inexpensive brass couplings for shaft sizes from 2 to 5 mm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Rigid - Hobby - Brass.

Couplings - Rigid - Set Screw
Couplings - Rigid - Set Screw

Search Rating: 27%

Also see combined categories:
All Rigid Couplings

0.35 to 5.1 Nm. Includes steel, stainless steel, brass and aluminium.

Quality Class Precision: Bore Tolerance +0.013 / - 0.000 concentric within 0.0127mm T.I.R. Quality Class Commercial: Bore Tolerance +0.051 / -0.000.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Rigid - Set Screw.

Flexible Shaft

TopHide Pictures

Shafts - Flexible - Coupling Ends - Open - Mild Steel
Shafts - Flexible - Coupling Ends - Open - Mild Steel

Search Rating: 27%

Also see combined categories:
All Coupling End Flexible Shaft

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Flexible - Coupling Ends - Open - Mild Steel.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - High Speed Cage
Bearings - Ball - High Speed Cage

Search Rating: 26%

Also see combined categories:
All Radial Ball Bearings

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - High Speed Cage.

Tools Threading

TopHide Pictures

Tools - Dies - High Speed Steel
Tools - Dies - High Speed Steel

Search Rating: 26%

Also see combined categories:
All Dies
All Tools

High Speed Steel Button Dies


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Dies - High Speed Steel. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Dies - High Speed Steel.

Tools - Taps - High Speed Steel - Extension
Tools - Taps - High Speed Steel - Extension

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Intermediate small shank spiral point extension taps 150mm long


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Extension.

Tools - Taps - High Speed Steel - Hand
Tools - Taps - High Speed Steel - Hand

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

High Speed Steel Short Machine Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

High Speed Steel (HSS) Short Machine taps.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Hand.

Tools - Taps - High Speed Steel - Hand - Sets
Tools - Taps - High Speed Steel - Hand - Sets

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set

High Speed Steel (HSS) Short Machine taps.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Hand - Sets.

Tools - Taps - High Speed Steel - Helicoil
Tools - Taps - High Speed Steel - Helicoil

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Helicoil.

Tools - Taps - High Speed Steel - NPT Pipe
Tools - Taps - High Speed Steel - NPT Pipe

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Taper Pipe Taps


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - NPT Pipe.

Tools - Taps - High Speed Steel - NPT Pipe - Interrupted
Tools - Taps - High Speed Steel - NPT Pipe - Interrupted

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Taper Pipe Taps


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - NPT Pipe - Interrupted.

Tools - Taps - High Speed Steel - Spiral Flute
Tools - Taps - High Speed Steel - Spiral Flute

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Metric spiral flute taps. Ground thread. 50o helix.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Spiral Flute.

Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide
Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. 37o helix.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide.

Tools - Taps - High Speed Steel - Spiral Point
Tools - Taps - High Speed Steel - Spiral Point

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Metric intermediate ground thread high speed steel taps. Also called gun taps.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Spiral Point.

Tools - Taps - High Speed Steel - Spiral Point - Premium
Tools - Taps - High Speed Steel - Spiral Point - Premium

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Premium spiral point intermediate taps in UNC and UNF. Also called gun taps.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Spiral Point - Premium.

Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide
Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. Also called gun taps.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide.

Bearings and Housings Insert

TopHide Pictures

Housings - Bearing - Pillow Block - Plastic
Housings - Bearing - Pillow Block - Plastic

Search Rating: 26%

Use with steel or plastic bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Pillow Block - Plastic.

Universal Joints Single

TopHide Pictures

Universal Joints - Single Joint - High Speed - Bored and Keyed
Universal Joints - Single Joint - High Speed - Bored and Keyed

Search Rating: 26%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. With keyway. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Universal Joints - Single Joint - High Speed - Bored and Keyed.

Universal Joints - Single Joint - High Speed - Plain Bore
Universal Joints - Single Joint - High Speed - Plain Bore

Search Rating: 26%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Universal Joints - Single Joint - High Speed - Plain Bore.

Universal Joints - Single Joint - High Speed - Solid
Universal Joints - Single Joint - High Speed - Solid

Search Rating: 26%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Unbored. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Universal Joints - Single Joint - High Speed - Solid.

Motors DC

TopHide Pictures

Motors - DC 36.0X71.0 mm
Motors - DC 36.0X71.0 mm

Search Rating: 25%

Also see combined categories:
All DC Motors

High power, high speed 11,800 RPM unloaded at 12 volts

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Motors - DC 36.0X71.0 mm.

Shafting General Purpose

TopHide Pictures

Rod - Drill Blanks
Rod - Drill Blanks

Search Rating: 25%

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill Blanks.

Spacers

TopHide Pictures

Spacers - Hex - Threaded - Aluminium
Spacers - Hex - Threaded - Aluminium

Search Rating: 25%

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Hex - Threaded - Aluminium.

Spacers - Hex - Threaded - Brass
Spacers - Hex - Threaded - Brass

Search Rating: 25%

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts.

Most items are nickel plated. Refer details recorded against each item.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Hex - Threaded - Brass. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Spacers - Hex - Threaded - Brass.

Spacers - Hex - Threaded - Steel
Spacers - Hex - Threaded - Steel

Search Rating: 25%

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Hex - Threaded - Steel. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Spacers - Hex - Threaded - Steel.

Bushes Bronze

TopHide Pictures

Bushes - Bronze - Sintered - Unflanged
Bushes - Bronze - Sintered - Unflanged

Search Rating: 25%

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Oil impregnated sintered bronze bushes.

Precision items show an allowable Load Speed Rating in Newtons times RPM.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Bronze - Sintered - Unflanged.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 123442 products in 2844 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.