Cam Followers Roller Type Stainless Steel Categories


Category Matches

Cam Followers

TopHide Pictures

Cam Followers - Roller Type - Stainless Steel
Cam Followers - Roller Type - Stainless Steel

Search Rating: 91%

Also see combined categories:
All Cam Followers

Stainless steel roller type cam followers.

Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cam Followers - Roller Type - Stainless Steel.

Cam Followers - Miniature - Standard
Cam Followers - Miniature - Standard

Search Rating: 74%

Also see combined categories:
All Cam Followers

Stainless steel ball type cam followers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cam Followers - Miniature - Standard.

Cam Followers - Roller Type - Standard
Cam Followers - Roller Type - Standard

Search Rating: 69%

Also see combined categories:
All Cam Followers

Carbon steel roller type cam followers.

Load 1 applies when outer race is mounted into a housing with standard bearing fit. Load 2 applies when used as a track roller. Stud designed to fit H7 housing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cam Followers - Roller Type - Standard.

Cam Followers - Roller Type - Miniature - Standard
Cam Followers - Roller Type - Miniature - Standard

Search Rating: 69%

Also see combined categories:
All Cam Followers

Small carbon steel roller type cam followers.

Carbon Steel - Nitrile Rubber seals assembled in the outer ring. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cam Followers - Roller Type - Miniature - Standard.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Washers Only - Stainless Steel.

Cam Followers

TopHide Pictures

Cam Followers - Roller Type - Urethane Covered
Cam Followers - Roller Type - Urethane Covered

Search Rating: 56%

Also see combined categories:
All Cam Followers

Urethane tyred cam followers for noise reduction, reduced wear and non marking


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cam Followers - Roller Type - Urethane Covered.

Cam Followers - Needle Roller Type - Crowned
Cam Followers - Needle Roller Type - Crowned

Search Rating: 56%

Also see combined categories:
All Cam Followers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cam Followers - Needle Roller Type - Crowned.

Cam Followers - Needle Roller Type - Standard
Cam Followers - Needle Roller Type - Standard

Search Rating: 56%

Also see combined categories:
All Cam Followers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cam Followers - Needle Roller Type - Standard.

Chain and Sprockets Roller

TopHide Pictures

Chain - Roller - Metal - Simplex - Stainless Steel
Chain - Roller - Metal - Simplex - Stainless Steel

Search Rating: 51%

Also see combined categories:
All Roller Chain

Includes miniature and Subminiature sizes from 3.747mm pitch. Single row.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Chain - Roller - Metal - Simplex - Stainless Steel.

Chain - Roller - Metal - Simplex - Links - Stainless Steel
Chain - Roller - Metal - Simplex - Links - Stainless Steel

Search Rating: 51%

Also see combined categories:
All Roller Chain Links

Includes Miniature Sizes. Single row.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Chain - Roller - Metal - Simplex - Links - Stainless Steel.

Catches

TopHide Pictures

Catches - Roller
Catches - Roller

Search Rating: 50%

304 Stainless Steel and Polyurethane


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Roller.

Linear Slides

TopHide Pictures

Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Search Rating: 49%

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel.

Chain and Sprockets Roller

TopHide Pictures

Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore
Sprockets -  3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore

Search Rating: 49%

Also see combined categories:
All Sprockets for Roller Chain

Miniature 3.75mm Pitch.

Match with 3.75mm simplex chain. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore.

Sprockets - 6.35 x 2.8mm - Simplex - Stainless Steel - Plain Bore
Sprockets -  6.35 x 2.8mm - Simplex  - Stainless Steel - Plain Bore

Search Rating: 49%

Also see combined categories:
All Sprockets for Roller Chain

25-1 ASA 1/4 Inch. Stainless Steel 303 grade with unfinished bore.

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Sprockets - 6.35 x 2.8mm - Simplex - Stainless Steel - Plain Bore.

Dual Vee Bearings

TopHide Pictures

Dual Vee - Tracks with Mounting Holes - Stainless Steel
Dual Vee - Tracks with Mounting Holes - Stainless Steel

Search Rating: 48%

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Dual Vee - Tracks with Mounting Holes - Stainless Steel.

Dual Vee - Tracks without Mounting Holes - Stainless Steel
Dual Vee - Tracks without Mounting Holes - Stainless Steel

Search Rating: 48%

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Dual Vee - Tracks without Mounting Holes - Stainless Steel.

Latches Other

TopHide Pictures

Latches - Keylocking - Cam
Latches - Keylocking - Cam

Search Rating: 47%

90o cam rotation. Zinc alloy die cast housing and cylinder. Five disc tumblers. Stainless steel bezel.

Offset and straight cam types included in this category. Simple brass keys are keyed alike.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Keylocking - Cam.

Collars

TopHide Pictures

Collars - Threaded - Clamp Type - Stainless Steel
Collars - Threaded - Clamp Type - Stainless Steel

Search Rating: 45%

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Threaded - Clamp Type - Stainless Steel.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Stud Type - Stainless Steel - Imperial
Mounts - Leveling - Stud Type - Stainless Steel - Imperial

Search Rating: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Good quality with value pricing. 303 stainless steel. Adjusters.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Stud Type - Stainless Steel - Imperial.

Mounts - Leveling - Stud Type - Stainless Steel - Metric
Mounts - Leveling - Stud Type - Stainless Steel - Metric

Search Rating: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Good quality with value pricing. 303 stainless steel. Adjusters.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Stud Type - Stainless Steel - Metric.

Collars

TopHide Pictures

Collars - Shaft - Standard - Stainless Steel
Collars - Shaft - Standard - Stainless Steel

Search Rating: 45%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Standard - Stainless Steel.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Socket Type - 303 Stainless Steel
Mounts - Leveling - Socket Type - 303 Stainless Steel

Search Rating: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Socket Type - 303 Stainless Steel.

Mounts - Leveling - Socket Type - 303 Stainless Steel 2
Mounts - Leveling - Socket Type - 303 Stainless Steel 2

Search Rating: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Socket Type - 303 Stainless Steel 2.

Mounts - Leveling - Socket Type - 316 Stainless Steel
Mounts - Leveling - Socket Type - 316 Stainless Steel

Search Rating: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For leveling machine tools, electronic racks, benches etc on uneven surfaces. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Socket Type - 316 Stainless Steel.

Mounts - Leveling - Stud Type - 303 Stainless Steel
Mounts - Leveling - Stud Type - 303 Stainless Steel

Search Rating: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Stud Type - 303 Stainless Steel.

Mounts - Leveling - Stud Type - 303 Stainless Steel - Acetal Base
Mounts - Leveling - Stud Type - 303 Stainless Steel - Acetal Base

Search Rating: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Stud Type - 303 Stainless Steel - Acetal Base.

Mounts - Leveling - Stud Type - 303 Stainless Steel - Padded
Mounts - Leveling - Stud Type - 303 Stainless Steel - Padded

Search Rating: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Stud Type - 303 Stainless Steel - Padded.

Mounts - Leveling - Stud Type - 316 Stainless Steel
Mounts - Leveling - Stud Type - 316 Stainless Steel

Search Rating: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Stud Type - 316 Stainless Steel.

Mounts - Leveling - Stud Type - 316 Stainless Steel - Padded
Mounts - Leveling - Stud Type - 316 Stainless Steel - Padded

Search Rating: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Stud Type - 316 Stainless Steel - Padded.

Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 45%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Stainless Steel - Closed.

Collars

TopHide Pictures

Collars - Shaft - Clamp Type - One Piece - Stainless Steel
Collars - Shaft - Clamp Type - One Piece - Stainless Steel

Search Rating: 44%

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - One Piece - Stainless Steel.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel
Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel

Search Rating: 44%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Use your own acme thread to make a custom stud. 303 Stainless Steel. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel.

Mounts - Leveling - Stud Type - Acme Thread - Stainless Steel
Mounts - Leveling - Stud Type - Acme Thread - Stainless Steel

Search Rating: 44%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

303 Stainless Steel. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Stud Type - Acme Thread - Stainless Steel.

Spring Washers

TopHide Pictures

Washers - Spring - 3 Wave Type - 302 Stainless Steel
Washers - Spring - 3 Wave Type - 302 Stainless Steel

Search Rating: 44%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Spring - 3 Wave Type - 302 Stainless Steel.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Search Rating: 44%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Flat - Stainless Steel.

Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Search Rating: 44%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - Stainless Steel.

Hooks

TopHide Pictures

Shackles - Anchor - Safety - 316 Stainless Steel
Shackles - Anchor - Safety - 316 Stainless Steel

Search Rating: 44%

Also see combined categories:
All Shackles

Meets US Federal specification RRC-271D Type IV

Bolt runs all the way through the shackle and is secured with a nut and cotter pin.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shackles - Anchor - Safety - 316 Stainless Steel.

Clamps

TopHide Pictures

Clamps - Gear - Screw Type
Clamps - Gear - Screw Type

Search Rating: 44%

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clamps - Gear - Screw Type.

Collars

TopHide Pictures

Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel
Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel

Search Rating: 44%

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars

Includes 303 and 304 Grade Stainless

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel.

Spacers

TopHide Pictures

Standoffs - Hexagonal
Standoffs - Hexagonal

Search Rating: 44%

Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Standoffs - Hexagonal.

Standoffs - Round
Standoffs - Round

Search Rating: 44%

Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Standoffs - Round.

Hooks

TopHide Pictures

Shackles - Anchor - Screw Pin - 316 Stainless Steel
Shackles - Anchor - Screw Pin - 316 Stainless Steel

Search Rating: 44%

Also see combined categories:
All Shackles

Meets US Federal specification RRC-271D Type IV


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shackles - Anchor - Screw Pin - 316 Stainless Steel.

Turnbuckles - Eye and Eye - 316 Stainless Steel
Turnbuckles - Eye and Eye - 316 Stainless Steel

Search Rating: 44%

Also see combined categories:
All Turn Buckles

Meets dimensions of ASTM specification F1145-92 Type 1, Class D


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Turnbuckles - Eye and Eye - 316 Stainless Steel.

Turnbuckles - Jaw and Jaw - 316 Stainless Steel
Turnbuckles - Jaw and Jaw - 316 Stainless Steel

Search Rating: 44%

Also see combined categories:
All Turn Buckles

Meets dimensions of ASTM specification F1145-92 Type 1, Class D


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Turnbuckles - Jaw and Jaw - 316 Stainless Steel.

Couplings Helical and Slit

TopHide Pictures

Couplings - Slit Type - Standard
Couplings - Slit Type - Standard

Search Rating: 44%

Also see combined categories:
All Helical and Slit Couplings

Aluminium - Stainless Steel - Flexible - Zero Backlash. 0.1 to 35 Nm. 2400 to 48000 rpm.

High Torsional Stiffness. Zero Backlash.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Slit Type - Standard.

Springs Compression

TopHide Pictures

Springs - Compression - Standard - Stainless Steel
Springs - Compression - Standard - Stainless Steel

Search Rating: 44%

Also see combined categories:
All Compression Springs

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Springs - Compression - Standard - Stainless Steel.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Economy - Stainless Steel
Pins - Ball Lock - Economy - Stainless Steel

Search Rating: 44%

Also see combined categories:
All Ball Lock Pins - Non Marine

Economical pins that can be used in military or conventional equipment. Type 303 stainless steel. Also called detent pins.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Stainless steel pins used in aircraft industry, food processing machinery, marine equipment, laboratory and testing equipment. Commercial drill tolerances provide clearance for standard pins. 303 stainless steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Economy - Stainless Steel.

Clamps

TopHide Pictures

Clamps - Gear - Split
Clamps - Gear - Split

Search Rating: 43%

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clamps - Gear - Split.

Cable

TopHide Pictures

Attachments - Wire Rope Clips - Stainless Steel
Attachments - Wire Rope Clips - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Wire Rope Clips

304 Stainless Steel

Furnished with hex nuts. Meet USA Fed. Spec. FF-C-450c, Type I, Class 1.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Attachments - Wire Rope Clips - Stainless Steel.

Bearings for Housings

TopHide Pictures

Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings
Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings

Search Rating: 43%

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings.

Clamping Rings

TopHide Pictures

Spiral Rings - External - Heavy Duty
Spiral Rings - External - Heavy Duty

Search Rating: 43%

Also see combined categories:
All External Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spiral Rings - External - Heavy Duty.

Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Pan Head - 316 Stainless
Screws - Self Tapping - Pan Head - 316 Stainless

Search Rating: 43%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Pan Head - 316 Stainless.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Nylon - Socket Type - No Lag Holes
Mounts - Leveling - Nylon - Socket Type - No Lag Holes

Search Rating: 43%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Steel and stainless steel socket internal threads. Use your own custom thread length. Adjusters.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Nylon - Socket Type - No Lag Holes.

Mounts - Leveling - Nylon - Studded Type - With Lag Holes
Mounts - Leveling - Nylon - Studded Type - With Lag Holes

Search Rating: 43%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Steel and stainless steel threads. Adjusters.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Nylon - Studded Type - With Lag Holes.

Bearings Special Purpose

TopHide Pictures

Bearings - Ball - 304 Stainless Steel
Bearings - Ball - 304 Stainless Steel

Search Rating: 43%

Also see combined categories:
All 300 Grade Stainless Bearings

Corrosion and Heat resistance - Non Magnetic - Unhardened.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm, Width +0/- 0.12 mm. Low load, low speed applications requiring maximum corrosion resistance. Non Magnetic. Cages, balls, races and shields from AISI 304 Stainless Steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 304 Stainless Steel.

Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Pan Head - 302 - 304 Stainless
Screws - Self Tapping - Pan Head - 302 - 304 Stainless

Search Rating: 43%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Self Tapping - Pan Head - 302 - 304 Stainless.

Knobs Precision

TopHide Pictures

Knobs - Precision - Knurled
Knobs - Precision - Knurled

Search Rating: 43%

Also see combined categories:
All Knurled Knobs
All Knobs

Set screw and clamp types - Stainless Steel. Also known as Thumb Knobs.

303 Stainless Steel. ID Tolerance +0.013 / -0.000 mm (+0.0005 / - 0.0000 inch).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Precision - Knurled.

Latches Other

TopHide Pictures

Latches - Tension - Versa Latch - 300 Grade Stainless Steel
Latches - Tension - Versa Latch - 300 Grade Stainless Steel

Search Rating: 43%

Torsion springs compensate for application irregularities. Easy to grasp handle design. Passivated type 300 grade stainless steel.

Keepers sold separately - see linked category.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Tension - Versa Latch - 300 Grade Stainless Steel.

Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Double Row - Open
Bearings - Ball - 316 Stainless Steel - Double Row - Open

Search Rating: 43%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Double Row - Open.

Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Search Rating: 43%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Open.

Latches Draw

TopHide Pictures

Latches - Draw - Over Centre - 300 Grade Stainless Steel
Latches - Draw - Over Centre - 300 Grade Stainless Steel

Search Rating: 43%

Passivated stainless steel. Latches mount with M4 screws, No. 8 screws or 5/32 rivets. Type B keeper uses a countersunk screw.

Keepers included. Type SC-97533 has a hole for a padlock.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Draw - Over Centre - 300 Grade Stainless Steel.

Clamping Rings

TopHide Pictures

Spiral Rings - Internal - Heavy Duty
Spiral Rings - Internal - Heavy Duty

Search Rating: 43%

Also see combined categories:
All Internal Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spiral Rings - Internal - Heavy Duty.

Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Search Rating: 42%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed.

Couplings Rigid

TopHide Pictures

Couplings - Rigid - 1 Piece Clamp - Stainless Steel
Couplings - Rigid - 1 Piece Clamp - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Rigid Couplings

303 Grade Stainless

Precision Machined. High torsional load. Non marring, easy to install and adjust. Use on hardened shafts, rigid clamp type design, easily machinable. Available with stepped bores and keyways on 5 week delivery.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Rigid - 1 Piece Clamp - Stainless Steel.

Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Search Rating: 42%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded.

Knobs Thumb

TopHide Pictures

Knobs - Thumb - With Cap Screw
Knobs - Thumb - With Cap Screw

Search Rating: 41%

Also see combined categories:
All Thumb Knobs
All Knobs

Four types and four colours.

Complete with high tensile alloy steel screw. If stainless steel screws required please order cap screws separately and knobs without screw.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Thumb - With Cap Screw.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 123442 products in 2844 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.