Bushes Steel Du Split Flanged Categories


Category Matches

Bushes Steel

TopHide Pictures

Bushes - Steel - DU - Split - Flanged
Bushes - Steel - DU - Split - Flanged

Search Rating: 59%

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE).

Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Steel - DU - Split - Flanged.

Bushes - Steel - DU - Split - Unflanged
Bushes - Steel - DU - Split - Unflanged

Search Rating: 57%

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE).

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Steel - DU - Split - Unflanged. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Bushes - Steel - DU - Split - Unflanged.

Bushes - Steel - DP4 - Split - Flanged
Bushes - Steel - DP4 - Split - Flanged

Search Rating: 52%

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Steel - DP4 - Split - Flanged.

Bushes - Steel - DP4 - Split - Unflanged
Bushes - Steel - DP4 - Split - Unflanged

Search Rating: 51%

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Steel - DP4 - Split - Unflanged.

Bushes Plastic

TopHide Pictures

Bushes - Plastic - Clip - Double Flanged
Bushes - Plastic - Clip - Double Flanged

Search Rating: 35%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

For use with sheet metal. Used as a light duty split bearing.

Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight. M250 Polymer minus 40 oC to 80 oC (minus 40 Deg F to 176 Deg F).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Clip - Double Flanged.

Bushes Steel

TopHide Pictures

Bushes - Stainless Steel and PTFE - Flanged
Bushes - Stainless Steel and PTFE - Flanged

Search Rating: 35%

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Stainless Steel and PTFE - Flanged.

Bushes - Stainless Steel and PTFE - Unflanged
Bushes - Stainless Steel and PTFE - Unflanged

Search Rating: 34%

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Stainless Steel and PTFE - Unflanged. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Bushes - Stainless Steel and PTFE - Unflanged.

Clamping Rings

TopHide Pictures

Rings - Split - Stainless Steel
Rings - Split - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Split Rings

316 stainless steel wire rings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Split - Stainless Steel.

Pins Cotter

TopHide Pictures

Pins - Split - Stainless Steel
Pins - Split - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Split Pins

Split pins.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Split - Stainless Steel.

Clamping Rings

TopHide Pictures

Rings - Split - Zinc Plated Steel
Rings - Split - Zinc Plated Steel

Search Rating: 33%

Also see combined categories:
All Split Rings

Zinc plated hard drawn steel wire rings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Split - Zinc Plated Steel.

Washers Lock

TopHide Pictures

Washers - Lock - Split - Steel
Washers - Lock - Split - Steel

Search Rating: 33%

Also see combined categories:
All Split Lock Washers
All Lock Washers

Plain and zinc plated

Dimensions are nominal and may vary between batches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Split - Steel.

Cross Blocks

TopHide Pictures

Joints - Swivel - Split Type - Steel
Joints - Swivel - Split Type - Steel

Search Rating: 33%

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Joints - Swivel - Split Type - Steel.

Washers Lock

TopHide Pictures

Washers - Lock - Split - Stainless Steel
Washers - Lock - Split - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Split Lock Washers
All Lock Washers

304 Grade Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Split - Stainless Steel.

Splined Shafts and Bushes

TopHide Pictures

Splined Shafts - Stainless Steel
Splined Shafts - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Splined Shafts

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Splined Shafts - Stainless Steel.

Clamps

TopHide Pictures

Clamps - Gear - Split
Clamps - Gear - Split

Search Rating: 32%

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clamps - Gear - Split.

Bushes Plastic

TopHide Pictures

Bushes - Plastic - Clip - Bevelled Edge
Bushes - Plastic - Clip - Bevelled Edge

Search Rating: 31%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

M250 Polymer minus 40 Deg C to 80 Deg C (minus 40 Deg F to 176 Deg F). Used as a light duty split bearing.

Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Clip - Bevelled Edge.

Pins Dowel

TopHide Pictures

Pins - Dowel Bushings
Pins - Dowel Bushings

Search Rating: 31%

Also see combined categories:
All Dowel Bushings

Series DB100 Spirol

Spring Steel. Precision rolled bushes manufactured from spring steel. Designed to eliminate the need for separate dowling where two components are to be located accurately together and fastened with bolts. They are available for use with bolts from M5 to M12.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Dowel Bushings.

Collars

TopHide Pictures

Collars - Shaft - Hinged - Steel
Collars - Shaft - Hinged - Steel

Search Rating: 30%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hinged - Steel.

Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Search Rating: 30%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hinged - Stainless Steel.

Bushes Plastic

TopHide Pictures

Bushings - Snap - Closed
Bushings - Snap - Closed

Search Rating: 29%

Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Open snap bushings are designed to provide protection from sharp edges where cable or hose runs through plate steel.

Similar to a bung, but designed with expanding catch for use in holes in sheet products. Also see grommets for a similar product made from rubber.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushings - Snap - Closed.

Bushings - Snap - Open
Bushings - Snap - Open

Search Rating: 29%

Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Closed snap bushings are designed to keep out dust and other contaminants and protect from sharp edges where cable or hose used to run through a hole in plate steel.

Also called a dome plug. Also see grommets for a similar product made from rubber.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushings - Snap - Open.

Bushes - Plastic - Iglidur A200 - Flanged
Bushes - Plastic - Iglidur A200 - Flanged

Search Rating: 21%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Food grade for low speeds and direct contact with food and pharmaceuticals.

Specific Gravity 1.14 g/cm3. Operating Temp 170 C short term / 80 C long term. Tensile Strength at 20 oC = 116 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is D11 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Iglidur A200 - Flanged.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 123431 products in 2841 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.