bottles and cans categories


Category Matches

Containers

TopHide Pictures

Containers - Cans - Open Top - With Lid
Containers - Cans - Open Top - With Lid

Search Rating: 100%

Also see combined categories:
All Containers

Similar to paint cans with a push in lid


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Containers - Cans - Open Top - With Lid.

Containers - Cans - Screw Top - With Lid
Containers - Cans - Screw Top - With Lid

Search Rating: 100%

Also see combined categories:
All Containers

Fuel can style


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Containers - Cans - Screw Top - With Lid.

Latches Adjustable

TopHide Pictures

Latches - Adjustable
Latches - Adjustable

Search Rating: 96%

These latches can be used in applications where variances occur. Zinc plated steel. Keepers need to be ordered separately. Either keeper can be used with either of the listed latches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Adjustable.

Studs

TopHide Pictures

Studs - Shoulder - Machine
Studs - Shoulder - Machine

Search Rating: 96%

Machine shoulder studs can be used with idlers or tensioner arms


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Studs - Shoulder - Machine.

Tools Threading

TopHide Pictures

Tools - Thread Repair
Tools - Thread Repair

Search Rating: 94%

Also see combined categories:
All Tools

Quickly repairs damaged screws

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Thread Repair.

Latches Handle

TopHide Pictures

Handles - Latching - 2-Point Locking Rod Kit
Handles - Latching - 2-Point Locking Rod Kit

Search Rating: 94%

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - 2-Point Locking Rod Kit.

Pulleys Idler

TopHide Pictures

Pulleys - Timing - Idler
Pulleys - Timing - Idler

Search Rating: 94%

Also see combined categories:
All Idler Pulleys

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - Idler.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Economy - Steel
Pins - Ball Lock - Economy - Steel

Search Rating: 93%

Also see combined categories:
All Ball Lock Pins - Non Marine

Economical pins that can be used in military or conventional equipment. Also called detent pins.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Commercial drill tolerances provide clearance for standard pins. Zinc plated C1144 steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Economy - Steel.

Linear Slides

TopHide Pictures

Slides - Linear - Cross Roller Rail
Slides - Linear - Cross Roller Rail

Search Rating: 93%

Also see combined categories:
All Linear Slides

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Linear - Cross Roller Rail.

Tensioners

TopHide Pictures

Tensioner - Fixed Angle
Tensioner - Fixed Angle

Search Rating: 93%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Can be mounted on top of any flat surface to provide horizontal tenaioning.

Idler shaft and pulleys not included with tensioner.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Fixed Angle.

Balls Metallic

TopHide Pictures

Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI
Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI

Search Rating: 92%

Also see combined categories:
All Metallic Balls

Implant Grade can be used for Jewellery and Body Piercing. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent.

Precision Grade: 200. Plain. Composition Percentage: Al 5.5-6.5, V 3.5-4.5, N 0.03, C 0.08, H 0.013, Fe 0.25, O 0.13, Ti Balance. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Economy - Stainless Steel
Pins - Ball Lock - Economy - Stainless Steel

Search Rating: 92%

Also see combined categories:
All Ball Lock Pins - Non Marine

Economical pins that can be used in military or conventional equipment. Type 303 stainless steel. Also called detent pins.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Stainless steel pins used in aircraft industry, food processing machinery, marine equipment, laboratory and testing equipment. Commercial drill tolerances provide clearance for standard pins. 303 stainless steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Economy - Stainless Steel.

Stroke Rotary Bushings

TopHide Pictures

Bushings - Stroke Rotary - Miniature
Bushings - Stroke Rotary - Miniature

Search Rating: 92%

Also see combined categories:
All Stroke Rotary Bushings

2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.

Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100oC (Constant), +120oC (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushings - Stroke Rotary - Miniature.

Magnets Ceramic

TopHide Pictures

Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit
Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit

Search Rating: 92%

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. Press fit. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit.

Balls Metallic

TopHide Pictures

Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI - Threaded
Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI - Threaded

Search Rating: 91%

Also see combined categories:
All Threaded Metallic Balls

Implant Grade can be used for Jewellery and Body Piercing. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent.

Precision Grade: 200. Plain. Composition Percentage: Al 5.5-6.5, V 3.5-4.5, N 0.03, C 0.08, H 0.013, Fe 0.25, O 0.13, Ti Balance. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent. Threaded either 1-72 UNF or M1.2.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI - Threaded.

Magnets Ceramic

TopHide Pictures

Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole
Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Search Rating: 91%

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole.

Gear Racks Flexible

TopHide Pictures

Gear Racks - Flexible
Gear Racks - Flexible

Search Rating: 91%

Also see combined categories:
All Flexible Gear Racks

Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.

20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Flexible.

Shafting Precision Ground

TopHide Pictures

Shafts - Idler
Shafts - Idler

Search Rating: 91%

Ready made precision ground idler shafts.

Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Idler.

Shim

TopHide Pictures

Shims - Rubber
Shims - Rubber

Search Rating: 90%

Handy non marring soft spacer shims in a wedge shape

Level and stabilise appliances, desks, tables, filing cabinets, machinery. Stackable. Vibration cushioning. Ribs ensure that wedges grab tight and stay in place. Black ridid wedges can support up to 2000 lbs. White flexible wedges can be trimmed with a utility knife.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shims - Rubber.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Threaded End - Stainless Steel
Pins - Ball Lock - Threaded End - Stainless Steel

Search Rating: 90%

Also see combined categories:
All Ball Lock Pins with Threaded End

One end threaded so you can attach your own handle or knob. Also called detent pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Threaded End - Stainless Steel.

Tools Threading

TopHide Pictures

Tools - Mandrels and Nosepieces - For Klik Rivet Nuts
Tools - Mandrels and Nosepieces - For Klik Rivet Nuts

Search Rating: 90%

Also see combined categories:
All Tools

Required for Thread Setter Tool

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Mandrels and Nosepieces - For Klik Rivet Nuts.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Padded - Light Duty - With Elastomer Pads
Mounts - Leveling - Padded - Light Duty - With Elastomer Pads

Search Rating: 90%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For light duty leveling applications. Can be used on furniture, light duty machines, tables, cabinets, light weight equipment etc. Adjusters.

For non skid applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Padded - Light Duty - With Elastomer Pads.

Mounts - Leveling - Padded - Light Duty - With Nylon Pads
Mounts - Leveling - Padded - Light Duty - With Nylon Pads

Search Rating: 90%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For light duty leveling applications. Can be used on furniture, light duty machines, tables, cabinets, light weight equipment etc. Adjusters.

For glide applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Leveling - Padded - Light Duty - With Nylon Pads.

Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Sintered Bronze
Rod - Round - Sintered Bronze

Search Rating: 89%

Also see combined categories:
All Metal Rod - Round

Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Sintered Bronze.

Tensioners

TopHide Pictures

Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Search Rating: 89%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Drive - Adjustable Flanged.

Mounts Machinery

TopHide Pictures

Mounts - Machinery - Industrial - Pneumatic Elastomeric
Mounts - Machinery - Industrial - Pneumatic Elastomeric

Search Rating: 89%

Also see combined categories:
All Industrial Machine Mounts

Well suited for applications requiring high deflection isolation. Vibration can be reduced as much as 90%. High stability horizontal to vertical stiffness ratio 1 to 1.

Heavy wall construction. Significant shock loads are deflected to the outer wall of the mount. Will not bottom out if properly installed. Will continue to support and isolateeven with no air pressure. Leveling is easily accomplished by adding or removing air.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Machinery - Industrial - Pneumatic Elastomeric.

Thread Inserts

TopHide Pictures

Inserts - Thread Repair - Keylocking Insertion Tools
Inserts - Thread Repair - Keylocking Insertion Tools

Search Rating: 88%

Used to insert keylocking inserts - keensert style. Keylocking inserts can be wound in without these tools but the tools make the job much easier. Also known as keenserts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Keylocking Insertion Tools.

Chain and Sprockets Roller

TopHide Pictures

Sprockets - Idler
Sprockets - Idler

Search Rating: 88%

Also see combined categories:
All Sprockets for Roller Chain

Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Sprockets - Idler.

Bearings Special Purpose

TopHide Pictures

Bearings - Ball - 4 Point Contact
Bearings - Ball - 4 Point Contact

Search Rating: 88%

4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 4 Point Contact.

Nuts Lock

TopHide Pictures

Nuts - Aerotight
Nuts - Aerotight

Search Rating: 87%

Also see combined categories:
All Lock Nuts

Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Aerotight.

Mounts Cup

TopHide Pictures

Mounts - Cupmounts - Industrial
Mounts - Cupmounts - Industrial

Search Rating: 87%

Also see combined categories:
All Cup Mounts

Protext against severe impact shock with efficient vibration isolation characteristics at frequencies above 40Hz.

Can be mounted in any orientation for protection of sensitive electronic, electrical and mechanical equipment from high impact shocks.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Cupmounts - Industrial.

Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Flat Tip - Aligning - Carbon Steel
Socket Set Screws - Flat Tip - Aligning - Carbon Steel

Search Rating: 86%

Also see combined categories:
All Flat Ball Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Flat Tip - Aligning - Carbon Steel.

Socket Set Screws - Flat Tip - Aligning - Stainless Steel
Socket Set Screws - Flat Tip - Aligning - Stainless Steel

Search Rating: 86%

Also see combined categories:
All Flat Ball Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Flat Tip - Aligning - Stainless Steel.

Cross Blocks

TopHide Pictures

Cross Blocks - Heavy Duty - Two Knobs
Cross Blocks - Heavy Duty - Two Knobs

Search Rating: 86%

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cross Blocks - Heavy Duty - Two Knobs.

Cross Blocks - Heavy Duty - Two Nuts
Cross Blocks - Heavy Duty - Two Nuts

Search Rating: 86%

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cross Blocks - Heavy Duty - Two Nuts.

Thread Inserts

TopHide Pictures

Inserts - Rivet Nuts - Klik - Standard
Inserts - Rivet Nuts - Klik - Standard

Search Rating: 86%

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Featuring a heavy duty thread profile and increased thickness in the collapse area. Steel with cadmium plating.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Rivet Nuts - Klik - Standard.

Lifting Chain

TopHide Pictures

Slings - Chain - Round - Endless - Tuflex
Slings - Chain - Round - Endless - Tuflex

Search Rating: 86%

Also see combined categories:
All Slings

Round slings have a double wall cover for greater life and added protection.

Wear points can be shifted to extend the life of the sling. Chokes tighter and releases easier than other slings. Colour coded for rating capacity. Has red core warning yarn inspection system.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slings - Chain - Round - Endless - Tuflex.

Cross Blocks

TopHide Pictures

Cross Blocks - Heavy Duty - One Knob One Nut
Cross Blocks - Heavy Duty - One Knob One Nut

Search Rating: 85%

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Cross Blocks - Heavy Duty - One Knob One Nut.

Tooling Balls

TopHide Pictures

Balls - Tooling - Two Piece - Construction - Steel
Balls - Tooling - Two Piece - Construction - Steel

Search Rating: 85%

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft. Construction balls can be pulled into a hole or bushing from below without applying pressure on the ball by using a cap screw in the internally tapped shank.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Construction - Steel.

Ball Parallels

TopHide Pictures

Parallels - Ball
Parallels - Ball

Search Rating: 84%

Used for handling large work in drill presses or band saw machines.

Placed between work and machine so work can be easily moved. Black Oxide finish with 9.525mm hardened steel balls. Balls are exposed both sides of sheet.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Parallels - Ball.

Bungs

TopHide Pictures

Bungs and Caps - Reversible - Round
Bungs and Caps - Reversible - Round

Search Rating: 84%

Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bungs and Caps - Reversible - Round.

Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Search Rating: 83%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed.

Rod Ends Studded

TopHide Pictures

Rod Ends - Steel - Studded - Quick Disconnect - Female
Rod Ends - Steel - Studded - Quick Disconnect - Female

Search Rating: 83%

Also see combined categories:
All Female Rod Ends with Stud

Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Studded - Quick Disconnect - Female.

Flexible Shaft

TopHide Pictures

Shafts - Flexible - Coupling Ends - Open - Mild Steel
Shafts - Flexible - Coupling Ends - Open - Mild Steel

Search Rating: 83%

Also see combined categories:
All Coupling End Flexible Shaft

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Flexible - Coupling Ends - Open - Mild Steel.

Wrenches

TopHide Pictures

Wrench - Plunger
Wrench - Plunger

Search Rating: 83%

Provides fast installation and removal of ball, spring and stubby spring plungers with slots at the spring loaded end. Prevents damage that can occur when a standard screwdriver is used by providing a recess for the tip whilst the body is being rotated.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Wrench - Plunger.

Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Search Rating: 82%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded.

Latches Slam Action

TopHide Pictures

Latches - Slam Action - Push Lock Style
Latches - Slam Action - Push Lock Style

Search Rating: 81%

Single hole mounting. Latches by simply pushing the door closed. Housing is made from chrome plated zinc die cast. Can be operated without key when left in the unlocked position. Unlatches simply by pressing the button.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Slam Action - Push Lock Style.

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Search Rating: 81%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Aluminium - Steel.

Shafting General Purpose

TopHide Pictures

Rod - Drill Blanks
Rod - Drill Blanks

Search Rating: 81%

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill Blanks.

Pulleys Timing AT5 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - AT5 - STOCK - Aluminium

Search Rating: 81%

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium.

Parts Boxes

TopHide Pictures

Parts Boxes - Grey Plastic
Parts Boxes - Grey Plastic

Search Rating: 80%

Also see combined categories:
All Parts Boxes

Fischer Plastics grey parts boxes with adjustable dividers and open top.

Open top. Fits most standard shelving. Ideal for storing small parts. Dividers can be removed, added or adjusted. Comes with dividers to make number of compartments shown - but additional dividers can be purchased.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Parts Boxes - Grey Plastic.

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Search Rating: 80%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Aluminium - Stainless 303.

Latches Draw

TopHide Pictures

Latches - Draw - T-Handle - Stainless Steel
Latches - Draw - T-Handle - Stainless Steel

Search Rating: 79%

Black rubber T Handle with stainless steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Draw - T-Handle - Stainless Steel.

Latches - Draw - T-Handle - Zinc Plated Steel
Latches - Draw - T-Handle - Zinc Plated Steel

Search Rating: 79%

Black rubber T Handle with steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Draw - T-Handle - Zinc Plated Steel.

Pins Clevis

TopHide Pictures

Pins - Clevis - Zinc Plated
Pins - Clevis - Zinc Plated

Search Rating: 79%

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Made from low carbon steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Clevis - Zinc Plated.

Handles

TopHide Pictures

Handles - Adjustable - Stud
Handles - Adjustable - Stud

Search Rating: 77%

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Adjustable - Stud.

Positioning

TopHide Pictures

Ball Slides and Crossed Roller Positioning Stages
Ball Slides and Crossed Roller Positioning Stages

Search Rating: 77%

Used for Gauging and Positioning Light to Medium Loads.

Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. Positioning Slides can be stacked for Multi axis applications. Preloaded positioning slides fully assemebled. Black Anodized Finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Slides and Crossed Roller Positioning Stages.

Circlips

TopHide Pictures

Circlips - External - Grooveless
Circlips - External - Grooveless

Search Rating: 76%

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Circlips - External - Grooveless.

Tensioners

TopHide Pictures

Tensioner - Horizontal Mount
Tensioner - Horizontal Mount

Search Rating: 76%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel and is mounted 90o to the length of the part. Both ends are tapped so the shaft can be threaded on either side of the tensioner.

Idler shaft and pulleys not included with tensioner. Hole is tapped to accept 38.1mm diameter idler shaft (ordered separately).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Horizontal Mount.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Double Row - with Glass Balls
Bearings - Acetal - Double Row - with Glass Balls

Search Rating: 75%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Double Row - with Glass Balls.

Bearings - Acetal - Single Row - with Glass Balls
Bearings - Acetal - Single Row - with Glass Balls

Search Rating: 75%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with Glass Balls.

Handpiece Parts

TopHide Pictures

Dental Handpiece Parts - Other
Dental Handpiece Parts - Other

Search Rating: 75%

A list of additional parts available for handpieces. Also see category Dental Handpiece Parts.

This category contains miscellaneous dental parts excluding tools, bearings and o-rings. Parts for specific handpiece models can be found under the brand name on the internet store main index.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Dental Handpiece Parts - Other.

Bearings for Housings

TopHide Pictures

Bearings - For Cast Iron Housings
Bearings - For Cast Iron Housings

Search Rating: 74%

Insert bearings with spherical OD for use with cast iron flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - For Cast Iron Housings.

Bearings - For Pressed Metal Housings
Bearings - For Pressed Metal Housings

Search Rating: 74%

Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - For Pressed Metal Housings. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Bearings - For Pressed Metal Housings.

Latches Other

TopHide Pictures

Catches - Straight Loop
Catches - Straight Loop

Search Rating: 74%

High strength overcentre catch and strike. Economical and compact. Available in plain steel, zinc plated or 304 stainless steel. With or without mounting holes. Strike is included. Dimensions are as mounted.

Tension can be increased by increasing distance between catch and strike.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Straight Loop.

Latches Slam Action

TopHide Pictures

Latches - Slam Action - Knob Style
Latches - Slam Action - Knob Style

Search Rating: 74%

Single hole mounting. Latches by simply pushing the door closed. Housing is made from chrome plated zinc die cast. Plastic knob. Unlatches with a 90o turn. Can be operated without key when left in the unlocked position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Slam Action - Knob Style.

Thread Inserts

TopHide Pictures

Inserts - Rivet Nuts - Klik - Threadsert
Inserts - Rivet Nuts - Klik - Threadsert

Search Rating: 74%

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Can be used in almost any material over 2.38mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material. Can be pressed or otherwise compressed manually with a hammer for quick installation jobs in sheet material. Tools are available for assembly in blind holes or production assembly. Email us for a price on tools.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Rivet Nuts - Klik - Threadsert.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Spider Type C - Complete
Couplings - Spider Type C - Complete

Search Rating: 73%

Also see combined categories:
All Insert and Jaw Type Couplings

Miniature aluminium curved jaw flexible couplings. 2 to 160 Nm. Match only hubs and spiders from listings SPIDER TYPE C. Inserts are held between the jaws of two hubs.

Discs (either red as standard with blue or white optional) are available to purchase separately. Flexible couplings transmit torque and rotational angle while absorbing misalignment. When the misalignment exceeds allowable values, vibration may result or the life of the coupling may become shortened. Zero backlash in low torque application, made capable by having the hubs pressed in a spacer. Can be used as a flexible coupling in a high torque application. Polyurethane spider.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Spider Type C - Complete.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Search Rating: 73%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Search Rating: 73%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Search Rating: 73%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls.

Linear Slides

TopHide Pictures

Slides - Linear - Recirculating Ball - Standard
Slides - Linear - Recirculating Ball - Standard

Search Rating: 73%

Also see combined categories:
All Linear Slides

The BSR precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants. Note BSR1530SL and BSR2040SL can not be mounted from inside of track rail.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Linear - Recirculating Ball - Standard.

Keys and Keysteel

TopHide Pictures

Keysteel Lengths - Rectangular - Carbon Steel
Keysteel Lengths - Rectangular - Carbon Steel

Search Rating: 73%

Also see combined categories:
All Keysteel Lengths

Plain carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keysteel Lengths - Rectangular - Carbon Steel.

Keysteel Lengths - Square - Carbon Steel
Keysteel Lengths - Square - Carbon Steel

Search Rating: 73%

Also see combined categories:
All Keysteel Lengths

Plain carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keysteel Lengths - Square - Carbon Steel.

Keysteel Lengths - Rectangular - Stainless Steel
Keysteel Lengths - Rectangular - Stainless Steel

Search Rating: 72%

Also see combined categories:
All Keysteel Lengths

303, 304 and 316 key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keysteel Lengths - Rectangular - Stainless Steel.

Keysteel Lengths - Rectangular - Zinc Plated
Keysteel Lengths - Rectangular - Zinc Plated

Search Rating: 72%

Also see combined categories:
All Keysteel Lengths

Zinc plated carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keysteel Lengths - Rectangular - Zinc Plated.

Keysteel Lengths - Square - Zinc Plated
Keysteel Lengths - Square - Zinc Plated

Search Rating: 72%

Also see combined categories:
All Keysteel Lengths

Zinc plated carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keysteel Lengths - Square - Zinc Plated.

Springs Compression

TopHide Pictures

Springs - Drawbar - Stainless Steel
Springs - Drawbar - Stainless Steel

Search Rating: 72%

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Springs - Drawbar - Stainless Steel.

Springs - Drawbar - Zinc Plated
Springs - Drawbar - Zinc Plated

Search Rating: 72%

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Springs - Drawbar - Zinc Plated.

Shim

TopHide Pictures

Feeler Gauge Stock - Stainless
Feeler Gauge Stock - Stainless

Search Rating: 71%

Used for close spacing and extremely tight tolerance situation.

Rc45-55 hardness. 300 grade stainless. Short flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 inches and can be easily cut to length. 12.7mm wide.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Feeler Gauge Stock - Stainless.

Latches Quarter Turn

TopHide Pictures

Latches - 1-4 Turn -L Handle - Coin Proof Slotted
Latches - 1-4 Turn -L Handle - Coin Proof Slotted

Search Rating: 71%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black diecast. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible. The slot is recessed so it's inaccessible to a coin, but can be turned with a screwdriver to lock and unlock the handle. For more security there is provision to use a padlock.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -L Handle - Coin Proof Slotted.

Magnets Ceramic

TopHide Pictures

Magnets - Ceramic Blocks
Magnets - Ceramic Blocks

Search Rating: 71%

Also see combined categories:
All Magnets
All Ceramic Magnets

Low cost, light weight, high energy material

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Magnets - Ceramic Blocks.

Magnets - Ceramic Cylinder
Magnets - Ceramic Cylinder

Search Rating: 71%

Also see combined categories:
All Magnets
All Ceramic Magnets

Low cost, light weight, high energy material

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Magnets - Ceramic Cylinder.

Bar and Rod

TopHide Pictures

Tool Steel - 496 Oil Hardening - Flat Stock
Tool Steel - 496 Oil Hardening - Flat Stock

Search Rating: 71%

General purpose tool steel with good wear resistance, durability and machinability

Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tool Steel - 496 Oil Hardening - Flat Stock.

Keys and Keysteel

TopHide Pictures

Keysteel Lengths - Square - Stainless Steel
Keysteel Lengths - Square - Stainless Steel

Search Rating: 71%

Also see combined categories:
All Keysteel Lengths

303, 304 and 316 grade key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keysteel Lengths - Square - Stainless Steel.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Large Handle
Plungers - Indexing - Large Handle

Search Rating: 71%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Extra large fluted handle for quick and easy plunger retraction. Can be fully retracted into the body by pulling up on the handle. Handle is black thermoplastic. Body and pin are steel with black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Large Handle.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Oldham - Hubs - Clamp Style
Couplings - Oldham - Hubs - Clamp Style

Search Rating: 71%

Also see combined categories:
All Insert and Jaw Type Couplings
All Oldham Hubs

0.06 to 44 Nm. Max Speed: 3000 RPM.

Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Oldham - Hubs - Clamp Style.

Shim

TopHide Pictures

Feeler Gauge Stock - C1095 Carbon Steel
Feeler Gauge Stock - C1095 Carbon Steel

Search Rating: 70%

Used for close spacing and extremely tight tolerance situation.

Rc48-62 hardness. High carbon steel. Short flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 inches and can be easily cut to length. 12.7mm wide.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Feeler Gauge Stock - C1095 Carbon Steel.

Tension Bushings

TopHide Pictures

Bushings - Tension
Bushings - Tension

Search Rating: 70%

Like a heavy duty roll pin.

Made of a high carbon spring steel with high elasticity, resilience and wear characteristics. Designed to replace solid steel tubular and case hardened bushings because they are close tolerance, self-retaining and through hard. Insertion can be easily accomplished with a hammer and drift. Ideal for high load/low-speed operation in articulating or continuous applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushings - Tension.

Gears Metric Racks

TopHide Pictures

Gear Racks - Module 0.3 - Brass
Gear Racks - Module 0.3 - Brass

Search Rating: 70%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.3 - Brass.

Gear Racks - Module 0.4 - Brass
Gear Racks - Module 0.4 - Brass

Search Rating: 70%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.4 - Brass.

Gear Racks - Module 0.4 - Steel
Gear Racks - Module 0.4 - Steel

Search Rating: 70%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.4 - Steel.

Gear Racks - Module 0.5 - Brass
Gear Racks - Module 0.5 - Brass

Search Rating: 70%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.5 - Brass.

Gear Racks - Module 0.5 - Stainless
Gear Racks - Module 0.5 - Stainless

Search Rating: 70%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.5 - Stainless.

Gear Racks - Module 0.75 - Brass
Gear Racks - Module 0.75 - Brass

Search Rating: 70%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.75 - Brass.

Gear Racks - Module 0.8 - Brass
Gear Racks - Module 0.8 - Brass

Search Rating: 70%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.8 - Brass.

Gear Racks - Module 1 - Brass
Gear Racks - Module 1 - Brass

Search Rating: 70%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1 - Brass.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Oldham - Disks for Clamp Style
Couplings - Oldham - Disks for Clamp Style

Search Rating: 70%

Also see combined categories:
All Insert and Jaw Type Couplings
All Oldham Disks

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Oldham - Disks for Clamp Style.

Mounts Machinery

TopHide Pictures

Mounts - Neoprene Pads - Ribbed Pattern
Mounts - Neoprene Pads - Ribbed Pattern

Search Rating: 70%

Also see combined categories:
All Mounting Pads

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Neoprene Pads - Ribbed Pattern.

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Plastics - Stainless 303
Inserts - Self Tapping - For Plastics - Stainless 303

Search Rating: 69%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Plastics - Stainless 303.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 120906 products in 2840 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.