Bearings Thrust Ball Washers Only Stainless Steel Categories


Category Matches

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Search Rating: 80%

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Washers Only - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Washers Only - Stainless Steel.

Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Search Rating: 79%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Flat - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Flat - Stainless Steel.

Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Search Rating: 67%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Grooved - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - Stainless Steel.

Bearings - Thrust - Ball - Washers Only - Chrome Steel
Bearings - Thrust - Ball - Washers Only - Chrome Steel

Search Rating: 63%

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Carbon Steel Washers are hardened to RC59.61.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Washers Only - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Washers Only - Chrome Steel.

Bearings - Thrust - Ball - Flat - Chrome Steel
Bearings - Thrust - Ball - Flat - Chrome Steel

Search Rating: 62%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Flat - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Flat - Chrome Steel.

Bearings Mounted

TopHide Pictures

Bearings - Self Clinching - Self Aligning - Sintered Bronze and Stainless
Bearings - Self Clinching - Self Aligning - Sintered Bronze and Stainless

Search Rating: 56%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearings in a special stainless steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Self Clinching - Self Aligning - Sintered Bronze and Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Self Clinching - Self Aligning - Sintered Bronze and Stainless.

Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Double Row - Open
Bearings - Ball - 316 Stainless Steel - Double Row - Open

Search Rating: 54%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Double Row - Open. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Double Row - Open.

Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Search Rating: 54%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Single Row - Open. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Open.

Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Search Rating: 54%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Single Row - Sealed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed.

Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Search Rating: 54%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Single Row - Shielded. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded.

Bearings Special Purpose

TopHide Pictures

Bearings - Ball - 304 Stainless Steel
Bearings - Ball - 304 Stainless Steel

Search Rating: 54%

Also see combined categories:
All 300 Grade Stainless Bearings

Corrosion and Heat resistance - Non Magnetic - Unhardened.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm, Width +0/- 0.12 mm. Low load, low speed applications requiring maximum corrosion resistance. Non Magnetic. Cages, balls, races and shields from AISI 304 Stainless Steel.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 304 Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 304 Stainless Steel.

Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 54%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Ball - Stainless Steel - Closed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Stainless Steel - Closed.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - 440C Stainless
Bearings - Ball - 440C Stainless

Search Rating: 53%

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless steel radial ball bearings

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 440C Stainless.

Bearings Flanged Ball

TopHide Pictures

Bearings - Ball - Flanged - 440C Stainless
Bearings - Ball - Flanged - 440C Stainless

Search Rating: 53%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - 440C Stainless. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Bearings - Ball - Flanged - 440C Stainless.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - WIR - 440C Stainless
Bearings - Ball - WIR - 440C Stainless

Search Rating: 53%

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - WIR - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - WIR - 440C Stainless.

Bearings Double Row Ball

TopHide Pictures

Bearings - Ball - Double Row - Angular Contact - Stainless Steel
Bearings - Ball - Double Row - Angular Contact - Stainless Steel

Search Rating: 53%

Also see combined categories:
All Double Row Ball Bearings

Double Row Ball Bearings - Angular Contact.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Double Row - Angular Contact - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Double Row - Angular Contact - Stainless Steel.

Bearings Flanged Ball

TopHide Pictures

Bearings - Ball - Flanged - WIR - 440C Stainless
Bearings - Ball - Flanged - WIR - 440C Stainless

Search Rating: 53%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - WIR - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - WIR - 440C Stainless.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - High Precision - 440C Stainless
Bearings - Ball - High Precision - 440C Stainless

Search Rating: 53%

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - High Precision - 440C Stainless.

Bearings Flanged Ball

TopHide Pictures

Bearings - Ball - Flanged - High Precision - 440C Stainless
Bearings - Ball - Flanged - High Precision - 440C Stainless

Search Rating: 53%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - High Precision - 440C Stainless.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - WIR - High Precision - 440C Stainless
Bearings - Ball - WIR - High Precision - 440C Stainless

Search Rating: 53%

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - WIR - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - WIR - High Precision - 440C Stainless.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Search Rating: 53%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Double Row - with 316 Stainless Steel Balls. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Search Rating: 53%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Single Row - with 302 Stainless Steel Balls. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Search Rating: 53%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Single Row - with 316 Stainless Steel Balls. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls.

Bearings Flanged Ball

TopHide Pictures

Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless
Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless

Search Rating: 53%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless.

Bearings Special Purpose

TopHide Pictures

Bearings - Ball - Textile Industry
Bearings - Ball - Textile Industry

Search Rating: 52%

Special Design Stainless and Chrome Steel Bearings for the Textile Industry.

Bearings in this category often have special features. Not all Bearings are readily available. Please enquire. Designed for use in textile industry machinery.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Textile Industry. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Textile Industry.

Ball Transfers

TopHide Pictures

Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel
Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel

Search Rating: 52%

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel.

Linear Bearings

TopHide Pictures

Bearings - Linear - Sliding - Stainless - PTFE - Closed
Bearings - Linear - Sliding - Stainless - PTFE - Closed

Search Rating: 52%

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Sliding - Stainless - PTFE - Closed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Sliding - Stainless - PTFE - Closed.

Bearings - Linear - Sliding - Stainless - PTFE - Open
Bearings - Linear - Sliding - Stainless - PTFE - Open

Search Rating: 52%

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Sliding - Stainless - PTFE - Open. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Sliding - Stainless - PTFE - Open.

Clamping Rings

TopHide Pictures

Spiral Rings - External - Medium Duty
Spiral Rings - External - Medium Duty

Search Rating: 50%

Also see combined categories:
All External Spiral Rings

AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spiral Rings - External - Medium Duty.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Roller - Washers
Bearings - Thrust - Roller - Washers

Search Rating: 49%

Also see combined categories:
All Roller Thrust Cages and Washers

Washers and Rollers sold separately. Match washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Roller - Washers. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Roller - Washers.

Pins General

TopHide Pictures

Pins - Side Thrust - Single Sided - Stainless Ball
Pins - Side Thrust - Single Sided - Stainless Ball

Search Rating: 49%

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Stainless ball and stainless spring with black oxide coated steel body.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Side Thrust - Single Sided - Stainless Ball.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Grooved - Chrome Steel
Bearings - Thrust - Ball - Grooved - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Grooved - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - Chrome Steel.

Clamping Rings

TopHide Pictures

Spiral Rings - Internal - Medium Duty
Spiral Rings - Internal - Medium Duty

Search Rating: 49%

Also see combined categories:
All Internal Spiral Rings

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spiral Rings - Internal - Medium Duty.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Roller - Cage and Rollers Only
Bearings - Thrust - Roller - Cage and Rollers Only

Search Rating: 49%

Also see combined categories:
All Roller Thrust Cages and Washers

Washers and Rollers sold separately. Match cage and roller assembly with washers from the washers category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Roller - Cage and Rollers Only. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Roller - Cage and Rollers Only.

Springs Disc

TopHide Pictures

Washers - Disc Spring - Ball Bearing Type
Washers - Disc Spring - Ball Bearing Type

Search Rating: 48%

Also see combined categories:
All Disc Springs

Specially designed for preloading the outer ring of ball bearings. C1075 steel. Also known as belleville washers.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Washers - Disc Spring - Ball Bearing Type. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Disc Spring - Ball Bearing Type.

Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Rolling Ball Tip - Stainless Steel
Socket Set Screws - Rolling Ball Tip - Stainless Steel

Search Rating: 47%

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Socket Set Screws - Rolling Ball Tip - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Rolling Ball Tip - Stainless Steel.

Bearings Hydrodynamic

TopHide Pictures

Bearings - Hydrodynamic Pressure
Bearings - Hydrodynamic Pressure

Search Rating: 47%

Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Hydrodynamic Pressure. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Hydrodynamic Pressure.

Pins General

TopHide Pictures

Pins - Side Thrust - Single Sided - Plastic Ball
Pins - Side Thrust - Single Sided - Plastic Ball

Search Rating: 47%

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Plastic ball and stainless spring with black oxide coated steel body.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Side Thrust - Single Sided - Plastic Ball.

Bearings Housings

TopHide Pictures

Housings - Bearing - Pillow Block - Miniature
Housings - Bearing - Pillow Block - Miniature

Search Rating: 47%

Spyraflo aluminium pillow block housings mounted with 440C stainless miniature bearings

No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Bearing - Pillow Block - Miniature. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Pillow Block - Miniature.

Sealing Plugs

TopHide Pictures

Sealing Plugs - Stainless Sleeve with Hardened Ball
Sealing Plugs - Stainless Sleeve with Hardened Ball

Search Rating: 46%

The sealing plug is a safe, quick, leakproof and low cost method for sealing cross-drilled holes. It ensures peak performance with a comfortable safety margin even in extreme applications.

Sleeve: Stainless Steel DIN 1.4305, AISI 303. Ball: Bearing Steel, Heat Treated. Hardness: HB = 220.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Sealing Plugs - Stainless Sleeve with Hardened Ball.

Bearings for Housings

TopHide Pictures

Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings
Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings

Search Rating: 45%

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings.

Bearings Conveyor

TopHide Pictures

Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row
Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row

Search Rating: 45%

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row.

Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row
Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row

Search Rating: 45%

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row.

Housings with Bearing

TopHide Pictures

Housings - Bearing - Tapped Base Unit - Stainless
Housings - Bearing - Tapped Base Unit - Stainless

Search Rating: 44%

Full stainless steel bearing units are the best solution for hostile chemical washdown applications. All metal bearing insert components are a combination of 302, 304 and 440 stainless steel. Seals are silicone rubber. Grease is H-1 food grade.

Operating temperature minus 20 oC to +120 deg C. Solid 304 stainless housings have a machined base and extremely smooth surface finish, essential for demanding washdown installations. These housings do not experience flaking, cracking or discolouration and are virtually unaffected by scrapes. Bearings are removable. Food grade.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Tapped Base Unit - Stainless.

Bearings Mounted

TopHide Pictures

Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-
Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-

Search Rating: 43%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in a special stainless steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-.

Housings with Bearing

TopHide Pictures

Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing
Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing

Search Rating: 43%

Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food grade.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing.

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing
Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing

Search Rating: 43%

Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food Grade.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing.

Dual Vee Bearings

TopHide Pictures

Dual Vee - Tracks with Mounting Holes - Stainless Steel
Dual Vee - Tracks with Mounting Holes - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Dual Vee - Tracks with Mounting Holes - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Dual Vee - Tracks with Mounting Holes - Stainless Steel.

Dual Vee - Tracks without Mounting Holes - Stainless Steel
Dual Vee - Tracks without Mounting Holes - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Dual Vee - Tracks without Mounting Holes - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Dual Vee - Tracks without Mounting Holes - Stainless Steel.

Washers Flat Metallic

TopHide Pictures

Washers - Flat - Stainless Steel 304 - Commercial
Washers - Flat - Stainless Steel 304 - Commercial

Search Rating: 43%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stainless Steel 304 - Commercial.

Washers - Flat - Stainless Steel 316 - Commercial
Washers - Flat - Stainless Steel 316 - Commercial

Search Rating: 43%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stainless Steel 316 - Commercial.

Washers - Flat - Stainless Steel - Precision Shim
Washers - Flat - Stainless Steel - Precision Shim

Search Rating: 43%

Also see combined categories:
All Precision Shim Washers
All Flat Washers and Spacers - Metallic

Precision Tolerances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stainless Steel - Precision Shim.

Washers Finishing

TopHide Pictures

Washers - Cup - Stainless Steel
Washers - Cup - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Cup Washers

For countersunk screws.

Stainless Steel cup washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Cup - Stainless Steel.

Washers Flat Metallic

TopHide Pictures

Washers - C - 303 Stainless Steel
Washers - C - 303 Stainless Steel

Search Rating: 43%

Also see combined categories:
All C Washers

Knurled outside edge


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - C - 303 Stainless Steel.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - Economy - 440C Stainless
Bearings - Ball - Economy - 440C Stainless

Search Rating: 43%

Also see combined categories:
All Radial Ball Bearings
All Economy Bearings

Taiwanese or Italian Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. The larger bearings 10mm bore size and above will usually be Italian whilst the smaller sizes are generally Taiwainese.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Economy - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Economy - 440C Stainless. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Bearings - Ball - Economy - 440C Stainless.

Bearings for Housings

TopHide Pictures

Bearings - Acetal with Stainless Balls - For Plastic Housings
Bearings - Acetal with Stainless Balls - For Plastic Housings

Search Rating: 43%

Also see combined categories:
All Acetal Bearings for Housings

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal with Stainless Balls - For Plastic Housings. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal with Stainless Balls - For Plastic Housings.

Bearings Angular Contact

TopHide Pictures

Bearings - Ball - Angular Contact - 440C Stainless
Bearings - Ball - Angular Contact - 440C Stainless

Search Rating: 43%

Also see combined categories:
All Angular Contact Bearings

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Angular Contact - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Angular Contact - 440C Stainless.

Springs Disc

TopHide Pictures

Washers - Disc Spring - Stainless Steel
Washers - Disc Spring - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Washers - Disc Spring - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Disc Spring - Stainless Steel.

Spring Washers

TopHide Pictures

Washers - Spring - Curved - Stainless Steel
Washers - Spring - Curved - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

ID and OD are long axis dimensions.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Spring - Curved - Stainless Steel.

Washers Lock

TopHide Pictures

Washers - Lock - Split - Stainless Steel
Washers - Lock - Split - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Split Lock Washers
All Lock Washers

304 Grade Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Split - Stainless Steel.

Washers Flat Metallic

TopHide Pictures

Washers - Heavy Duty - Machined - Stainless Steel
Washers - Heavy Duty - Machined - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Flat Washers and Spacers - Metallic

303 Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Heavy Duty - Machined - Stainless Steel.

Bearings Angular Contact

TopHide Pictures

Bearings - Ball - Angular Contact - Flanged - 440C Stainless
Bearings - Ball - Angular Contact - Flanged - 440C Stainless

Search Rating: 42%

Also see combined categories:
All Angular Contact Bearings

Single row angular contact ball bearings with flanges.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Angular Contact - Flanged - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Angular Contact - Flanged - 440C Stainless.

Housings with Bearing

TopHide Pictures

Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing
Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing

Search Rating: 42%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing.

Rod Ends Stainless Steel

TopHide Pictures

Rod Ends - Stainless Steel - Bronze Lined - Male
Rod Ends - Stainless Steel - Bronze Lined - Male

Search Rating: 42%

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rod Ends - Stainless Steel - Bronze Lined - Male. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Stainless Steel - Bronze Lined - Male.

Washers Aligning

TopHide Pictures

Washers - Self Aligning - Components - Stainless Steel
Washers - Self Aligning - Components - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

AISI 303 Stainless Steel. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Self Aligning - Components - Stainless Steel.

Washers - Self Aligning - Sets - Stainless Steel
Washers - Self Aligning - Sets - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Self Aligning - Sets - Stainless Steel.

Washers Lock

TopHide Pictures

Washers - Lock - External Tooth - Stainless Steel
Washers - Lock - External Tooth - Stainless Steel

Search Rating: 42%

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - External Tooth - Stainless Steel.

Washers - Lock - Internal Tooth - Stainless Steel
Washers - Lock - Internal Tooth - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Internal Tooth - Stainless Steel.

Bearings Mounted

TopHide Pictures

Housings - Pillow Block - Washdown
Housings - Pillow Block - Washdown

Search Rating: 42%

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo electroless nickel plated aluminium housing with stainless steel coated self aligning acetal bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Electroless nickel plated aluminium housing. Corrosion Resistant. Light weight.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Pillow Block - Washdown. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Pillow Block - Washdown.

Shafting Precision Ground

TopHide Pictures

Shafting - Pre Drilled and Tapped - Stainless Steel Steel
Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Search Rating: 42%

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Shafting - Pre Drilled and Tapped - Stainless Steel Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Pre Drilled and Tapped - Stainless Steel Steel.

Bearings Mounted

TopHide Pictures

Housings - Flanged - Washdown
Housings - Flanged - Washdown

Search Rating: 42%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo electroless nickel plated aluminum housing with self aligning Stainless Steel covered Acetal bearing.

See links at bottom of web page for more information. +/- 5% Static Alignment. Electroless nickel plated aluminium housing. Corrosion Resistant. Light weight.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Flanged - Washdown. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Flanged - Washdown.

Housings with Bearing

TopHide Pictures

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing
Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing

Search Rating: 42%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing
Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing

Search Rating: 42%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing.

Washers Square

TopHide Pictures

Washers - Square - Heavy Duty - 304 Stainless Steel
Washers - Square - Heavy Duty - 304 Stainless Steel

Search Rating: 42%

Also see combined categories:
All Square Washers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Square - Heavy Duty - 304 Stainless Steel.

Bearings Thrust

TopHide Pictures

Washers - Self Aligning - Sets - Plastic
Washers - Self Aligning - Sets - Plastic

Search Rating: 42%

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Washers - Self Aligning - Sets - Plastic. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Self Aligning - Sets - Plastic.

Gearheads Inline

TopHide Pictures

Gearheads - Inline - Planetary - Size 17 - Precision
Gearheads - Inline - Planetary - Size  17 - Precision

Search Rating: 42%

Also see combined categories:
All Inline Planetary Gearheads

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearheads - Inline - Planetary - Size 17 - Precision.

Spring Washers

TopHide Pictures

Washers - Spring - 3 Wave Type - 302 Stainless Steel
Washers - Spring - 3 Wave Type - 302 Stainless Steel

Search Rating: 42%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Spring - 3 Wave Type - 302 Stainless Steel.

Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Washer Face - Stainless Steel
Screws - Thumb - Knurled - Washer Face - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Thumb Screws

Knurled head stainless steel thumb screws with an integral washer


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Knurled - Washer Face - Stainless Steel.

Ball Transfers

TopHide Pictures

Ball Transfer Units - Flange Mount - Standard - Stainless - Deep
Ball Transfer Units - Flange Mount - Standard - Stainless - Deep

Search Rating: 41%

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Flange Mount - Standard - Stainless - Deep. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Flange Mount - Standard - Stainless - Deep.

Ball Transfer Units - Flange Mount - Standard - Stainless - Slim
Ball Transfer Units - Flange Mount - Standard - Stainless - Slim

Search Rating: 41%

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Flange Mount - Standard - Stainless - Slim. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Flange Mount - Standard - Stainless - Slim.

Linear Slides

TopHide Pictures

Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Search Rating: 41%

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel.

Linear Slides - Utilitrak - CR - Carriage
Linear Slides - Utilitrak - CR - Carriage

Search Rating: 41%

Use with Utilitrak CR Channel. Stainless steel wheels with sealed bearings. Match by size.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear Slides - Utilitrak - CR - Carriage. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slides - Utilitrak - CR - Carriage.

Tube and Tubing

TopHide Pictures

Tube - Round - Stainless Steel
Tube - Round - Stainless Steel

Search Rating: 41%

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tube - Round - Stainless Steel.

Splined Shafts and Bushes

TopHide Pictures

Splined Shafts - Stainless Steel
Splined Shafts - Stainless Steel

Search Rating: 41%

Also see combined categories:
All Splined Shafts

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Splined Shafts - Stainless Steel.

Linear Slides

TopHide Pictures

Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext
Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Search Rating: 40%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext.

Bearings Conveyor

TopHide Pictures

Bearings - Conveyor - Hex Bore - Plastic - Double Row
Bearings - Conveyor - Hex Bore - Plastic - Double Row

Search Rating: 40%

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Conveyor - Hex Bore - Plastic - Double Row. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Conveyor - Hex Bore - Plastic - Double Row.

Bearings - Conveyor - Hex Bore - Plastic - Single Row
Bearings - Conveyor - Hex Bore - Plastic - Single Row

Search Rating: 40%

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Conveyor - Hex Bore - Plastic - Single Row. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Conveyor - Hex Bore - Plastic - Single Row.

Linear Slides

TopHide Pictures

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext

Search Rating: 40%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext.

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Search Rating: 40%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext.

Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext
Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext

Search Rating: 40%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext.

Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext
Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Search Rating: 40%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext.

Washers Flat Metallic

TopHide Pictures

Washers - Flat - Sintered Bronze - Precision
Washers - Flat - Sintered Bronze - Precision

Search Rating: 40%

Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat thrust washers made from oil impregnated sintered bronze


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Washers - Flat - Sintered Bronze - Precision. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Sintered Bronze - Precision.

Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Search Rating: 40%

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Stainless Steel.

Linear Slides

TopHide Pictures

Slides - Drawer - Front Disconnect - Friction - 19mm Ext
Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Search Rating: 39%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext.

Slides - Drawer - Front Disconnect - Lever - Full Ext
Slides - Drawer - Front Disconnect - Lever - Full Ext

Search Rating: 39%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Front Disconnect - Lever - Full Ext.

Bearings Mounted

TopHide Pictures

Bearings - Self Clinching - Self Aligning - Sintered Bronze
Bearings - Self Clinching - Self Aligning - Sintered Bronze

Search Rating: 39%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Self Clinching - Self Aligning - Sintered Bronze. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Self Clinching - Self Aligning - Sintered Bronze.

Linear Slides

TopHide Pictures

Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage
Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Search Rating: 39%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage.

Slides - Drawer - Front Disconnect - Latch Lever - Full Ext
Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Search Rating: 39%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Front Disconnect - Latch Lever - Full Ext.

Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext
Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Search Rating: 39%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext.

Bearings Press In

TopHide Pictures

Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP
Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP

Search Rating: 39%

Also see combined categories:
All Press In Bearings

Porous sintered bronze bearing. -28 to 95 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 123431 products in 2841 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.