About Us Brands Download Contact Counter Sales Distributors FAQ Freight Payments Products Search Site Technical More Links...

Bearings Thrust Ball Washers Only Chrome Steel Categories


Category Matches

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Washers Only - Chrome Steel
Bearings - Thrust - Ball - Washers Only - Chrome Steel

Search Rating: 76%

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Carbon Steel Washers are hardened to RC59.61.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Washers Only - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Washers Only - Chrome Steel.

Bearings - Thrust - Ball - Flat - Chrome Steel
Bearings - Thrust - Ball - Flat - Chrome Steel

Search Rating: 75%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Flat - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Flat - Chrome Steel.

Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Search Rating: 63%

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Washers Only - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Washers Only - Stainless Steel.

Bearings - Thrust - Ball - Grooved - Chrome Steel
Bearings - Thrust - Ball - Grooved - Chrome Steel

Search Rating: 63%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Grooved - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - Chrome Steel.

Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Search Rating: 62%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Flat - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Flat - Stainless Steel.

Bearings - Thrust - Ball - Cage and Balls Only - Stainless Steel
Bearings - Thrust - Ball - Cage and Balls Only - Stainless Steel

Search Rating: 61%

Also see combined categories:
All Ball Thrust Bearing Components

Match with thrust washers of the same bore and OD.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Cage and Balls Only - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Cage and Balls Only - Stainless Steel.

Bearings Ball

TopHide Pictures

Bearings - Ball - Chrome Steel
Bearings - Ball - Chrome Steel

Search Rating: 50%

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Chrome steel radial ball bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Chrome Steel.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Roller - Washers
Bearings - Thrust - Roller - Washers

Search Rating: 49%

Also see combined categories:
All Roller Thrust Cages and Washers

Washers and Rollers sold separately. Match washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Roller - Washers. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Roller - Washers.

Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Search Rating: 49%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Grooved - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - Stainless Steel.

Bearings Ball

TopHide Pictures

Bearings - Ball - Economy - Chrome Steel
Bearings - Ball - Economy - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Radial Ball Bearings
All Economy Bearings

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Economy - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Economy - Chrome Steel.

Bearings - Ball - Flanged - Chrome Steel
Bearings - Ball - Flanged - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - Chrome Steel.

Bearings - Ball - WIR - Chrome Steel
Bearings - Ball - WIR - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - WIR - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - WIR - Chrome Steel.

Bearings Angular Contact

TopHide Pictures

Bearings - Ball - Angular Contact - Chrome Steel
Bearings - Ball - Angular Contact - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Angular Contact Bearings

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Angular Contact - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Angular Contact - Chrome Steel.

Bearings Ball

TopHide Pictures

Bearings - Ball - Flanged - WIR - Chrome Steel
Bearings - Ball - Flanged - WIR - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - WIR - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - WIR - Chrome Steel.

Bearings - Ball - High Precision - Chrome Steel
Bearings - Ball - High Precision - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Chrome Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - High Precision - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - High Precision - Chrome Steel.

Bearings - Ball - Double Row - Radial - Chrome Steel
Bearings - Ball - Double Row - Radial - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Double Row Ball Bearings

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Double Row - Radial - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Double Row - Radial - Chrome Steel.

Bearings - Ball - With Snap Ring - Chrome Steel
Bearings - Ball - With Snap Ring - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with snap ring. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - With Snap Ring - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - With Snap Ring - Chrome Steel.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Roller - Cage and Rollers Only
Bearings - Thrust - Roller - Cage and Rollers Only

Search Rating: 49%

Also see combined categories:
All Roller Thrust Cages and Washers

Washers and Rollers sold separately. Match cage and roller assembly with washers from the washers category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Roller - Cage and Rollers Only. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Roller - Cage and Rollers Only.

Bearings Ball

TopHide Pictures

Bearings - Ball - Double Row - Angular Contact - Chrome Steel
Bearings - Ball - Double Row - Angular Contact - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Double Row Ball Bearings

Double Row Ball Bearings - Angular Contact.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Double Row - Angular Contact - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Double Row - Angular Contact - Chrome Steel.

Bearings - Ball - WIR - With Snap Ring - Chrome Steel
Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - WIR - With Snap Ring - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - WIR - With Snap Ring - Chrome Steel.

Bearings - Ball - With Snap Ring Groove Only - Chrome Steel
Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Search Rating: 49%

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - With Snap Ring Groove Only - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel.

Bearings - Ball - Textile Industry
Bearings - Ball - Textile Industry

Search Rating: 48%

Special Design Stainless and Chrome Steel Bearings for the Textile Industry.

Bearings in this category often have special features. Not all Bearings are readily available. Please enquire. Designed for use in textile industry machinery.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Textile Industry. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Textile Industry.

Springs Disc

TopHide Pictures

Washers - Disc Spring - Ball Bearing Type
Washers - Disc Spring - Ball Bearing Type

Search Rating: 48%

Also see combined categories:
All Disc Springs

Specially designed for preloading the outer ring of ball bearings. C1075 steel. Also known as belleville washers.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Washers - Disc Spring - Ball Bearing Type. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Disc Spring - Ball Bearing Type.

Bearings Thrust

TopHide Pictures

Washers - Self Aligning - Sets - Plastic
Washers - Self Aligning - Sets - Plastic

Search Rating: 42%

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Washers - Self Aligning - Sets - Plastic. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Self Aligning - Sets - Plastic.

Washers Flat Metallic

TopHide Pictures

Washers - Flat - Sintered Bronze - Precision
Washers - Flat - Sintered Bronze - Precision

Search Rating: 40%

Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat thrust washers made from oil impregnated sintered bronze


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Washers - Flat - Sintered Bronze - Precision. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Sintered Bronze - Precision.

Housings with Integral Bearing

TopHide Pictures

Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing

Search Rating: 40%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing.

Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing

Search Rating: 40%

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing.

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Search Rating: 40%

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing.

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing

Search Rating: 40%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Search Rating: 40%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing.

Bearings Mounted

TopHide Pictures

Bearings - Self Clinching - Self Aligning - Sintered Bronze
Bearings - Self Clinching - Self Aligning - Sintered Bronze

Search Rating: 39%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Self Clinching - Self Aligning - Sintered Bronze. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Self Clinching - Self Aligning - Sintered Bronze.

Bearings - Self Clinching - Self Aligning - Sintered Bronze and Stainless
Bearings - Self Clinching - Self Aligning - Sintered Bronze and Stainless

Search Rating: 39%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearings in a special stainless steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Self Clinching - Self Aligning - Sintered Bronze and Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Self Clinching - Self Aligning - Sintered Bronze and Stainless.

Bearings Press In

TopHide Pictures

Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP
Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP

Search Rating: 39%

Also see combined categories:
All Press In Bearings

Porous sintered bronze bearing. -28 to 95 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Banded
Bearings - Thrust - Ball - Banded

Search Rating: 38%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Banded Type

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Banded. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Banded.

Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic
Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic

Search Rating: 38%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic.

Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic

Search Rating: 38%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic.

Washers Lock

TopHide Pictures

Washers - Lock - Tabbed - Heavy Duty
Washers - Lock - Tabbed - Heavy Duty

Search Rating: 38%

Also see combined categories:
All Tabbed Lock Washers
All Lock Washers

Heavy duty WH / TW Series for bearing locknuts.

Carbon spring steel. Use with NH series locknuts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Tabbed - Heavy Duty.

Bushes Steel

TopHide Pictures

Bushes - Steel - DU - Split - Flanged
Bushes - Steel - DU - Split - Flanged

Search Rating: 38%

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE).

Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bushes - Steel - DU - Split - Flanged. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Steel - DU - Split - Flanged.

Bushes - Steel - DU - Split - Unflanged
Bushes - Steel - DU - Split - Unflanged

Search Rating: 38%

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE).

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bushes - Steel - DU - Split - Unflanged. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Steel - DU - Split - Unflanged. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Bushes - Steel - DU - Split - Unflanged.

Bearings and Housings Insert Type

TopHide Pictures

Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium
Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium

Search Rating: 37%

Starting at 8mm bore size, aluminium silver series housings with removable chrome steel bearing


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium.

Pulley Blocks

TopHide Pictures

Pulleys - Blocks - Eye - Swivel
Pulleys - Blocks - Eye - Swivel

Search Rating: 36%

Also see combined categories:
All Pulley Blocks

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Blocks - Eye - Swivel.

Bearings Ball

TopHide Pictures

Bearings - Ball - 304 Stainless Steel
Bearings - Ball - 304 Stainless Steel

Search Rating: 36%

Also see combined categories:
All 300 Grade Stainless Bearings

Corrosion and Heat resistance - Non Magnetic - Unhardened.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm, Width +0/- 0.12 mm. Low load, low speed applications requiring maximum corrosion resistance. Non Magnetic. Cages, balls, races and shields from AISI 304 Stainless Steel.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 304 Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 304 Stainless Steel.

Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Search Rating: 36%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Single Row - Open. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Open.

Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Search Rating: 36%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Single Row - Sealed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed.

Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Search Rating: 36%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Single Row - Shielded. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded.

Bearings Linear

TopHide Pictures

Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 36%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Ball - Stainless Steel - Closed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Stainless Steel - Closed.

Bearings - Linear - Ball - Thomson Precision Steel - Closed
Bearings - Linear - Ball - Thomson Precision Steel - Closed

Search Rating: 36%

Also see combined categories:
All Thomson Linear Ball Bearings

For running on shafts fixed at the ends.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Ball - Thomson Precision Steel - Closed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Thomson Precision Steel - Closed.

Bearings Ball

TopHide Pictures

Bearings - Ball - Ceramic Hybrid
Bearings - Ball - Ceramic Hybrid

Search Rating: 36%

Also see combined categories:
All Radial Ball Bearings

Steel Races with Si3N4 Ceramic Balls

Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Ceramic Hybrid. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Ceramic Hybrid.

Pulley Blocks

TopHide Pictures

Pulleys - Blocks - Flat
Pulleys - Blocks - Flat

Search Rating: 36%

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Blocks - Flat.

Bearings Ball

TopHide Pictures

Bearings - Ball - 440C Stainless
Bearings - Ball - 440C Stainless

Search Rating: 36%

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless steel radial ball bearings

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 440C Stainless.

Bearings - Ball - Double Row - Angular Contact - Stainless Steel
Bearings - Ball - Double Row - Angular Contact - Stainless Steel

Search Rating: 36%

Also see combined categories:
All Double Row Ball Bearings

Double Row Ball Bearings - Angular Contact.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Double Row - Angular Contact - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Double Row - Angular Contact - Stainless Steel.

Bearings - Ball - Flanged - 440C Stainless
Bearings - Ball - Flanged - 440C Stainless

Search Rating: 36%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - 440C Stainless.

Bearings - Ball - WIR - 440C Stainless
Bearings - Ball - WIR - 440C Stainless

Search Rating: 36%

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - WIR - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - WIR - 440C Stainless.

Bearings - Ball - Flanged - WIR - 440C Stainless
Bearings - Ball - Flanged - WIR - 440C Stainless

Search Rating: 36%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - WIR - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - WIR - 440C Stainless.

Bearings - Ball - High Precision - 440C Stainless
Bearings - Ball - High Precision - 440C Stainless

Search Rating: 36%

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - High Precision - 440C Stainless.

Bearings - Ball - Flanged - High Precision - 440C Stainless
Bearings - Ball - Flanged - High Precision - 440C Stainless

Search Rating: 36%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - High Precision - 440C Stainless.

Bearings - Ball - WIR - High Precision - 440C Stainless
Bearings - Ball - WIR - High Precision - 440C Stainless

Search Rating: 36%

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - WIR - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - WIR - High Precision - 440C Stainless.

Pulley Blocks

TopHide Pictures

Pulleys - Blocks - Eye - Fixed
Pulleys - Blocks - Eye - Fixed

Search Rating: 36%

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Blocks - Eye - Fixed.

Bearings Ball

TopHide Pictures

Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless
Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless

Search Rating: 35%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Search Rating: 35%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Double Row - with 316 Stainless Steel Balls. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Search Rating: 35%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Single Row - with 302 Stainless Steel Balls. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Search Rating: 35%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Single Row - with 316 Stainless Steel Balls. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls.

Washers Thrust

TopHide Pictures

Washers - Thrust - DP4 Type
Washers - Thrust - DP4 Type

Search Rating: 35%

Also see combined categories:
All Thrust Washers

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N per mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Thrust - DP4 Type.

Pulleys Grooved

TopHide Pictures

Pulleys - U Groove - Idler - Steel - With Bearing
Pulleys - U Groove - Idler - Steel - With Bearing

Search Rating: 35%

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Steel with Steel Ball Bearings

Use with round belts such as Rounthane or O-Rings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - U Groove - Idler - Steel - With Bearing.

Ball Transfers

TopHide Pictures

Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Search Rating: 35%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Screw Stem - Steel - Precision. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Screw Stem - Steel - Precision.

Ball Transfer Units - Base Mount - Standard - Steel
Ball Transfer Units - Base Mount - Standard - Steel

Search Rating: 35%

Also see combined categories:
All Base Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Base Mount - Standard - Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Base Mount - Standard - Steel.

Ball Transfer Units - Dismantlable - Heavy Duty - Steel
Ball Transfer Units - Dismantlable  - Heavy Duty - Steel

Search Rating: 35%

Also see combined categories:
All Push Fit Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Dismantlable - Heavy Duty - Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Dismantlable - Heavy Duty - Steel.

Ball Transfer Units - Flange Mount - Standard - Steel - Slim
Ball Transfer Units - Flange Mount - Standard - Steel - Slim

Search Rating: 35%

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Flange Mount - Standard - Steel - Slim. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Flange Mount - Standard - Steel - Slim.

Bushings Spherical

TopHide Pictures

Bushings - Spherical - Steel
Bushings - Spherical - Steel

Search Rating: 35%

Also see combined categories:
All Spherical Bushings

Steel spherical plain bearings. Also known as ball bushings.

Compensates for axial loads and misalignment.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bushings - Spherical - Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushings - Spherical - Steel.

Pulleys Grooved

TopHide Pictures

Pulleys - U Groove - Idler - Plastic - With Ball Bearing
Pulleys - U Groove - Idler - Plastic - With Ball Bearing

Search Rating: 35%

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - U Groove - Idler - Plastic - With Ball Bearing.

Ball Transfers

TopHide Pictures

Ball Transfer Units - Base Mount - Heavy Duty - Steel
Ball Transfer Units - Base Mount  - Heavy Duty - Steel

Search Rating: 34%

Also see combined categories:
All Base Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Base Mount - Heavy Duty - Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Base Mount - Heavy Duty - Steel.

Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel
Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel

Search Rating: 34%

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel.

Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel
Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel

Search Rating: 34%

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel.

Bushings Spherical

TopHide Pictures

Bushings - Spherical - Steel - With Oil Hole
Bushings - Spherical - Steel - With Oil Hole

Search Rating: 34%

Also see combined categories:
All Spherical Bushings

Steel spherical plain bearings. Also known as ball bushings.

Compensates for axial loads and misalignment.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bushings - Spherical - Steel - With Oil Hole. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushings - Spherical - Steel - With Oil Hole.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Air Springs Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Bar Batteries Bearings Acetal Bearings Angular C... Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale Bearings Thrust Bearings and Housi... Bearings for Denta... Bearings for Housings Bearings for Skating Bearings for Wheel... Belts PosiDrive Belts Rounthane Books

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Bottles and Cans Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Cable Ties Cam Followers Cams Carburettor Parts Carousels Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Circlips Clamping Bushings Clamping Rings Clamps Clevis Joints Clips Clutches Collars Collectibles Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Other Couplings Rigid Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Disk Cleaning Machine Drylin Bearings an...

Visa Card Accepted
Visa
Secure Checkout


Dual Eye Joints Dual Vee Bearings Easy Selection Kits Educational Projects Enclosures Engineering and Ho... Eyebolts Fastening Bushings Fishing Reel Parts Flexible Shaft Food Processor Parts Framing Fuel Games Amusement Games General Gas Springs Gear Blanks Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gearheads Inline Gearmotors Basic Gearmotors DC Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur

Master Card Accepted
Mastercard
Secure Checkout


Gears Imperial Worms Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Servo Motors Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings with Inte... Hubs ISOPADS Insulators Isolators Jigsaws Jockey Wheel Thrus... Keys Keys and Keysteel Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Precision Knobs Round

Pay By
Phone after Checkout
07 3275 2097
International +61 7 3275 2097


Knobs Star Knobs Thumb Knobs Tri Knobs Wing Lanyards Latches Lazy Susans Leadscrews Lifting Chain Lights Linear Slides Locking Compounds Lubricants General... MRI Table Bearings Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Marking Measuring Equipment Measuring Gauges Medical Motors DC Motors Stepper Motors Vibrating Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Nuts Lock ORings

Amex Accepted
Amex
Secure Checkout


ORings for Dental ... Oil Seals Packing Boxes and ... Parts Boxes Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Pins Locating Plungers Ball Plungers Indexing Plungers Spring Positioning Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Grooved Pulleys Idler Pulleys Vee Punches Pushbike Bearings Ratchets and Pawls Robotic Wheels Rod Ends Rollers Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach Screws Countersunk

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sets Shaft Extenders an... Shafting Aluminium Shafting General P... Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Soldering Spacers Special Effects Li... Splined Shafts and... Spring Anchors Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant F... Springs Die Springs Disc Springs Extension Springs General

Visa Card Accepted
Visa
Secure Checkout


Springs Torsion Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stationery Stays Stops Spring Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Swimming Pool Bear... Switches Tape Tee Joints Tension Bushings Tensioners Thread Thread Inserts Threaded Rod Timing Belt Lengths Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Tips Tolerance Rings Tooling Balls

Master Card Accepted
Mastercard
Secure Checkout


Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring Tools General Purpose Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Tube and Tubing Turntables Universal Joints VRings Vacuum Cleaner Belts Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers General Washers Lock Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 114228 products in 2801 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.