Bearings Linear Ball Thomson Precision Steel Closed Categories


Category Matches

Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Thomson Precision Steel - Closed
Bearings - Linear - Ball - Thomson Precision Steel - Closed

Search Rating: 86%

Also see combined categories:
All Thomson Linear Ball Bearings

For running on shafts fixed at the ends.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Ball - Thomson Precision Steel - Closed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Thomson Precision Steel - Closed.

Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 66%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Ball - Stainless Steel - Closed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Stainless Steel - Closed.

Ball Transfers

TopHide Pictures

Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Search Rating: 65%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Screw Stem - Steel - Precision. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ball Transfer Units - Screw Stem - Steel - Precision.

Linear Slides

TopHide Pictures

Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow
Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow

Search Rating: 62%

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow.

Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard
Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard

Search Rating: 62%

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard.

Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel
Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel

Search Rating: 62%

Match with carriage by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Rails are subjected to multiple straightening processes during and after grinding of the ball paths to ensure straight and accurate rails.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel.

Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Miniature - Super High Precision
Bearings - Linear - Ball - Miniature - Super High Precision

Search Rating: 58%

Also see combined categories:
All Closed Linear Ball Bearings

High Precision Corrosion Resistant Miniature Linear Bearings.

High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Ball - Miniature - Super High Precision. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Miniature - Super High Precision.

Bearings - Linear - Ball - Closed
Bearings - Linear - Ball - Closed

Search Rating: 56%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Ball - Closed.

Linear Slides

TopHide Pictures

Slides - Linear - Cross Roller Rail
Slides - Linear - Cross Roller Rail

Search Rating: 56%

Also see combined categories:
All Linear Slides

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Linear - Cross Roller Rail.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - High Precision - Chrome Steel
Bearings - Ball - High Precision - Chrome Steel

Search Rating: 56%

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Chrome Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - High Precision - Chrome Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - High Precision - Chrome Steel.

Shafting Precision Ground

TopHide Pictures

Shafting - Pre Drilled and Tapped - Stainless Steel Steel
Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Search Rating: 56%

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Shafting - Pre Drilled and Tapped - Stainless Steel Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Pre Drilled and Tapped - Stainless Steel Steel.

Shafting - Pre Drilled and Tapped - High Carbon Steel
Shafting - Pre Drilled and Tapped - High Carbon Steel

Search Rating: 56%

Also see combined categories:
All Shafting
All Steel Shafting

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Shafting - Pre Drilled and Tapped - High Carbon Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Pre Drilled and Tapped - High Carbon Steel.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - High Precision - 440C Stainless
Bearings - Ball - High Precision - 440C Stainless

Search Rating: 56%

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - High Precision - 440C Stainless.

Bearings Flanged Ball

TopHide Pictures

Bearings - Ball - Flanged - High Precision - 440C Stainless
Bearings - Ball - Flanged - High Precision - 440C Stainless

Search Rating: 55%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - High Precision - 440C Stainless.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - WIR - High Precision - 440C Stainless
Bearings - Ball - WIR - High Precision - 440C Stainless

Search Rating: 55%

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - WIR - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - WIR - High Precision - 440C Stainless.

Bearings Flanged Ball

TopHide Pictures

Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless
Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless

Search Rating: 55%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless.

Linear Slides

TopHide Pictures

Linear Slides - Cross Roller Tables - Steel
Linear Slides - Cross Roller Tables - Steel

Search Rating: 52%

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear Slides - Cross Roller Tables - Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slides - Cross Roller Tables - Steel.

Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow
Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow

Search Rating: 52%

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination. Thin dense chrome.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow.

Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard
Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard

Search Rating: 52%

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination. Thin dense chrome.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard.

Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated
Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated

Search Rating: 51%

Match with carriage by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Rails are subjected to multiple straightening processes during and after grinding of the ball paths to ensure straight and accurate rails.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated.

Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Search Rating: 51%

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel.

Slides - Linear - Recirculating Ball - Standard
Slides - Linear - Recirculating Ball - Standard

Search Rating: 51%

Also see combined categories:
All Linear Slides

The BSR precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants. Note BSR1530SL and BSR2040SL can not be mounted from inside of track rail.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Linear - Recirculating Ball - Standard.

Slides - Linear - Non Recirculating Ball - Standard
Slides - Linear - Non Recirculating Ball - Standard

Search Rating: 51%

Also see combined categories:
All Linear Slides

The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Linear - Non Recirculating Ball - Standard.

Linear Bearings

TopHide Pictures

Bearings - Linear - Frelon J Lined - Closed - Precision
Bearings - Linear - Frelon J Lined - Closed - Precision

Search Rating: 50%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Frelon J Lined - Closed - Precision. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Frelon J Lined - Closed - Precision.

Bearings - Linear - Frelon Gold Lined - Closed - Precision
Bearings - Linear - Frelon Gold Lined - Closed - Precision

Search Rating: 50%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Frelon Gold Lined - Closed - Precision. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Frelon Gold Lined - Closed - Precision.

Shafting Precision Ground

TopHide Pictures

Rail Supports - With Shaft - One Piece
Rail Supports - With Shaft - One Piece

Search Rating: 50%

Also see combined categories:
All Shaft Supports

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rail Supports - With Shaft - One Piece. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Supports - With Shaft - One Piece.

Linear Bearings

TopHide Pictures

Bearings - Linear - Frelon Gold Lined - Open - Precision
Bearings - Linear - Frelon Gold Lined - Open - Precision

Search Rating: 49%

Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Frelon Gold Lined - Open - Precision. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Frelon Gold Lined - Open - Precision.

Linear Bearings with Housing

TopHide Pictures

Housings - Bearing - Pillow Block - Frelon - Precision - Closed
Housings - Bearing - Pillow Block - Frelon - Precision - Closed

Search Rating: 49%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Bearing - Pillow Block - Frelon - Precision - Closed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Pillow Block - Frelon - Precision - Closed.

Housings - Bearing - Pillow Block - Frelon - Precision - Open
Housings - Bearing - Pillow Block - Frelon - Precision - Open

Search Rating: 49%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Bearing - Pillow Block - Frelon - Precision - Open. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Pillow Block - Frelon - Precision - Open.

Linear Slides

TopHide Pictures

Rail Systems - Type 1 - Linear - Precision - Rails
Rail Systems - Type 1 - Linear - Precision - Rails

Search Rating: 48%

Also see combined categories:
All Type 1 Carriages and Rails

Match with carriages by Size Column

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rail Systems - Type 1 - Linear - Precision - Rails. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Systems - Type 1 - Linear - Precision - Rails.

Linear Bearings

TopHide Pictures

Bearings - Linear - Sliding - Stainless - PTFE - Closed
Bearings - Linear - Sliding - Stainless - PTFE - Closed

Search Rating: 48%

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Sliding - Stainless - PTFE - Closed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Sliding - Stainless - PTFE - Closed.

Linear Slides

TopHide Pictures

Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged
Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged

Search Rating: 48%

Also see combined categories:
All Type 1 Carriages and Rails

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged.

Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow
Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow

Search Rating: 48%

Also see combined categories:
All Type 1 Carriages and Rails

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow.

Linear - Assemblies - Ball Slide - Precision
Linear - Assemblies - Ball Slide - Precision

Search Rating: 48%

These precision ball slides have a typical coefficient of friction of 0.003 and provide straight line accuracy of 0.0005mm per mm of travel.

At load capacity a life of 250 million mm of travel can be expected. The expected life at half load capacity is 2.5 billion mm. Factory preload adjustment prevents sideplay and backlash. Lightweight aluminium carriage and base with high load capacity. Four tapped and threaded carriage holes and counterbored base holes simplify installation and component mounting. Long life, self cleaning ball bearing needs no lubrication. Positional repeatability 0.005mm. Clear anodised finish.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear - Assemblies - Ball Slide - Precision. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear - Assemblies - Ball Slide - Precision.

Linear Bearings

TopHide Pictures

Bearings - Linear - Sliding - Stainless - PTFE - Open
Bearings - Linear - Sliding - Stainless - PTFE - Open

Search Rating: 47%

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Linear - Sliding - Stainless - PTFE - Open. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Sliding - Stainless - PTFE - Open.

Gearheads Inline

TopHide Pictures

Gearheads - Inline - Planetary - Size 17 - Precision
Gearheads - Inline - Planetary - Size  17 - Precision

Search Rating: 47%

Also see combined categories:
All Inline Planetary Gearheads

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearheads - Inline - Planetary - Size 17 - Precision.

Linear Slides

TopHide Pictures

Linear - Mini Rail - Self-Lubricating - Carriage
Linear - Mini Rail - Self-Lubricating - Carriage

Search Rating: 47%

Additional carriages for the Mini-Rail system. Match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear - Mini Rail - Self-Lubricating - Carriage. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear - Mini Rail - Self-Lubricating - Carriage.

Linear - Mini Rail - Self-Lubricating - Carriage and Rail
Linear - Mini Rail - Self-Lubricating - Carriage and Rail

Search Rating: 46%

Comes with one carriage. Spare carriages sold separately - match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear - Mini Rail - Self-Lubricating - Carriage and Rail. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear - Mini Rail - Self-Lubricating - Carriage and Rail.

Clamping Rings

TopHide Pictures

Rings - Retaining - PR Type Internal - For Linear Bearings
Rings - Retaining - PR Type Internal - For Linear Bearings

Search Rating: 46%

Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Retaining - PR Type Internal - For Linear Bearings.

Rings - Retaining - C Type External - For Linear Bearings
Rings - Retaining - C Type External - For Linear Bearings

Search Rating: 45%

Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Retaining - C Type External - For Linear Bearings.

Linear Bearings with Housing

TopHide Pictures

Housings - Linear - Thomson Super Smart Pillow Block - Closed
Housings - Linear - Thomson Super Smart Pillow Block - Closed

Search Rating: 45%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Linear - Thomson Super Smart Pillow Block - Closed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Linear - Thomson Super Smart Pillow Block - Closed.

Shafting Precision Ground

TopHide Pictures

Shafting - Ground - Precision - High Carbon Steel
Shafting - Ground - Precision - High Carbon Steel

Search Rating: 45%

Also see combined categories:
All Shafting
All Steel Shafting

Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Shafting - Ground - Precision - High Carbon Steel. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - High Carbon Steel.

Linear Bearings with Housing

TopHide Pictures

Housings - Linear - Thomson Super Flanged
Housings - Linear - Thomson Super Flanged

Search Rating: 45%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Linear - Thomson Super Flanged. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Linear - Thomson Super Flanged.

Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed
Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed

Search Rating: 44%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed.

Housings - Linear - Thomson Super Smart Flanged
Housings - Linear - Thomson Super Smart Flanged

Search Rating: 44%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Linear - Thomson Super Smart Flanged. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Linear - Thomson Super Smart Flanged.

Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed
Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed

Search Rating: 44%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed.

Ball Screws Rolled

TopHide Pictures

Ballscrew - Thomson Saginaw
Ballscrew - Thomson Saginaw

Search Rating: 44%

Also see combined categories:
All Ball Screws

Offer 90% efficiency converting rotary to linear motion with low coefficient of friction. Match all components within the Thomson Saginaw range only.

When replacing screws, hydraulics or pneumatics, they allow the use of smaller, less expensive drive motors and reduce the need for auxiliary equipment. Offer dependable accuracy and repeatability, Made off high quality alloy steel, hardened to Rockwell 56-60C.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ballscrew - Thomson Saginaw. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Ballscrew - Thomson Saginaw.

Shafting General Purpose

TopHide Pictures

Shafting - Unground - Silver Steel
Shafting - Unground - Silver Steel

Search Rating: 43%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Unground - Silver Steel.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - Semi-Ground - Sealed
Bearings - Ball - Semi-Ground - Sealed

Search Rating: 43%

Also see combined categories:
All Radial Ball Bearings

Radial ball bearings. This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Semi-Ground - Sealed. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Semi-Ground - Sealed.

Bearings - Ball - Semi-Ground - Shielded
Bearings - Ball - Semi-Ground - Shielded

Search Rating: 43%

Also see combined categories:
All Radial Ball Bearings

Radial ball bearings. This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - Semi-Ground - Shielded. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Semi-Ground - Shielded.

Linear Slides

TopHide Pictures

Slides - Linear - Clean Room
Slides - Linear - Clean Room

Search Rating: 43%

Also see combined categories:
All Linear Slides

Stainless Steel throughout (similar to 440C). Speed: 0.5 m/sec (30 m/min). Temperature: +100oC (Continuous), +140oC (Maximum). Life will be less than normal at +100oC and dimensions may change. Lateral Loading: Dynamic x 1.13 C - Static x 1.19 Co. Precision Linear Slide Unit is a compact linear motion rolling guide for limited stroke length.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Linear - Clean Room.

Shafting Precision Ground

TopHide Pictures

Supports - Pedestal Two Bolt
Supports - Pedestal Two Bolt

Search Rating: 42%

Also see combined categories:
All Supports

For linear shafting.

Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Supports - Pedestal Two Bolt.

Linear Slides

TopHide Pictures

Linear Slides - Cross Roller Tables - Aluminium
Linear Slides - Cross Roller Tables - Aluminium

Search Rating: 41%

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear Slides - Cross Roller Tables - Aluminium. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slides - Cross Roller Tables - Aluminium.

Rail Systems - Miniature Profile
Rail Systems - Miniature Profile

Search Rating: 41%

Also see combined categories:
All Linear Slides

Ideal for precision applications where mounting space is limited

Gothic arch grooves at raceway contacts enables slide to sustain loads & movement from any direction. Made from stainless steel or plastic for corrosion resistance. End caps have oil holes for easy relubrication.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Systems - Miniature Profile.

Linear Slide Assemblies - Cross Roller
Linear Slide Assemblies - Cross Roller

Search Rating: 41%

Also see combined categories:
All Linear Slide Assemblies

Higher load capacity than precision ball slide assemblies. High cycling rates. Tolerant of shock and overhanging loads.

Accuracy of 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm. Not as naturally cleaning as ball slides. A good choice for environments protected from dust, and when heavy loads are a consideration. Positive stops prevent over-travel. Rollers improve capacity 8-10 times that of balls. Alternately crossed rollers handle force in any direction. Lightweight aluminium carriage and base. Interchangeable with many types of ball slides. Four tapped carriage holes and two counter bored base holes simplify installation and component mounting.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear Slide Assemblies - Cross Roller. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slide Assemblies - Cross Roller.

Linear Slides - Low Profile - Crossed Roller Table - Aluminium
Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Search Rating: 41%

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear Slides - Low Profile - Crossed Roller Table - Aluminium. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slides - Low Profile - Crossed Roller Table - Aluminium.

Linear Slide Assemblies - Plain - Low Profile - High Load
Linear Slide Assemblies - Plain - Low Profile - High Load

Search Rating: 39%

Also see combined categories:
All Linear Slide Assemblies

High capacity, square gib slides are ideal for precision machine tool applications.

The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear Slide Assemblies - Plain - Low Profile - High Load. Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Slide Assemblies - Plain - Low Profile - High Load.

Ball Splines Linear

TopHide Pictures

Linear Ball Splines - Bearings - Unflanged
Linear Ball Splines - Bearings - Unflanged

Search Rating: 38%

Also see combined categories:
All Linear Ball Splines

Use with Linear Ball Spline Shaft.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Linear Ball Splines - Bearings - Unflanged.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 123430 products in 2839 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.