Categories that include the terms: BALL and JOINT
|
Fasteners |  |
Joints - Ball and Socket - In-line (Relevance 10/10)
|
Joints - Ball and Socket - Right Angle (Relevance 10/10)
Steel Type: Zinc Passivated Induction Hardened. Stainless Steel Type: 303 Grade unhardened. Max. Static push/pull loads are valid for both radial and axial loads. Standard Steel type Ball Stud Tensile strength: Rm = 600 N/mm sq (Not applicable to stainless type). Standard Steel type Housing Tensile strength: Rm = 500 N/mm sq (Not applicable to stainless type).
|
Ball Screws | |
Covers - Ball Screws (Relevance 7/10)
For protection of precision Ball Screws from oil, coolants, grease, chips and dust.
15 Deg C to 120 Deg C temp range Made of black neoprene coated nylon. Sold per foot. Multiple quantites MAY be supplied in single length. 1 foot compresses to approx 14.5mm
|
Covers - Ball Screws - Mounting (Relevance 7/10)
Mounting Kits for Ball Screw covers.
|
Balls | |
Balls - Acetal (Relevance 7/10)
High intensity strength, rigidity, outstanding resistance to abrasion and most solvents.
Tolerances available on request. Acetal Copolymer. High intensity strength, rigidity, outstanding resistance to abrasion and most solvents. Opaque White. Specific Gravity: 1.4.
|
Balls - Acrylic (Relevance 7/10)
Resistance to weather and sunlight. Good abrasion resistance.
Diametrical tolerances typically +/- 0.08 or 0.13 mm depending on size. Acrylic (Methyl Methacrylate). Resistance to weather and sunlight. Good abrasion resistance. Water clear transparent. Polished. Ground and Polished.
|
Balls - Bored - Plastic (Relevance 7/10)
Bored acetal balls as used in plastic rod ends.
Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight.
|
Balls - Bored - Steel (Relevance 7/10)
Bored steel balls as used in steel rod ends.
Hardness: 58-64 Rc. Material: SUJ-2.
|
Balls - Ceramic - Silicon Nitride (Relevance 7/10)
Outstanding wear resistance. Good thermal and chemical resistance.
High hardness. High strength over a wide temperature range. High fracture toughness. Outstanding wear resistance. Good thermal and chemical resistance.
|
Balls - Ceramic - Zirconia (Relevance 7/10)
Outstanding wear resistance. Excellent thermal and chemical resistance.
|
Balls - Chrome Steel (Relevance 7/10)
Hardness: Rockwell C: 60-70.
Tolerances available on request. SAE 52100 Chrome Steel. Hardness: Rockwell C: 60-70. Specific Gravity: 7.833.
|
Balls - Nylon (Relevance 7/10)
Resists alkalies, weak acids and most organic solvents.
Tolerances available on request. Nylon (Polyamide 6/6). Resists alkalies, weak acids and most organic solvents. Low water absorption. Unpolished. Specific Gravity: 1.14.
|
Balls - PTFE (Relevance 7/10)
No water absorption. Temperatures up to 288 Deg C.
Tolerances available on request. Not affected by any known acids or alkalies. No water absorption. Temperatures up to 288 Deg C. Unpolished. Specific Gravity: 2.3.
|
Balls - Phosphor Bronze (Relevance 7/10)
Specific Gravity 8.4
|
Balls - Polypropylene (Relevance 7/10)
Excellent for liquid level float applications.
Tolerance and spherecity: up to and including 25.4mm diameter = +/-0.0508mm, over 25.4mm diameter +/-0.0762mm. Very resistant to most acids and alkalies. Excellent for liquid level float applications. Unpolished. Specific Gravity: 0.91.
|
Balls - Ruby - Synthetic (Relevance 7/10)
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
Tolerances available on request. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Specific Gravity: 3.98.
|
Balls - Sapphire - Synthetic (Relevance 7/10)
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
Tolerances available on request. Specific Gravity: 3.98. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Transparent (refractive index 1.76).
|
Balls - Stainless Steel - 304 Grade (Relevance 7/10)
A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.
Tolerances available on request. Grade 100. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000 Deg C.
|
Balls - Stainless Steel - 316 Grade (Relevance 7/10)
A4 Grade. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.
Tolerances available on request. Grade 100. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000 Deg C.
|
Balls - Stainless Steel - 316L Grade (Relevance 7/10)
Easier to machine than standard 316 grade.
316L Stainless Steel has the same properties as 316, except that it has a lower carbon content. It is also easier to machine. Non-magnetic. Resistant to severe corrosive conditions. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972.
|
Balls - Stainless Steel - 440C Grade (Relevance 7/10)
Hardness: Rockwell C: 55-60.
Tolerances available on request. AISI440C Stainless Steel. Hardness: Rockwell C: 55-60.
|
Balls - Torlon (Relevance 7/10)
Torlon™ 4301 Bearing Grade Balls.
Polyamide-imide (Torlon™) Balls. Rockwell Hardness (Method A): E86 or M109-119. Specific Gravity: 1.38. Colour: Brown Opaque.
|
Balls - Tungsten Carbide (Relevance 7/10)
Extreme hardness and wear resistance.
Tolerances available on request. Precision Grade: Grade 25. Hardness: Rockwell A: 91.5 (Approx 77 Rockwell C). Extreme hardness and wear resistance. Specific Gravity: 14.95.
|
Bearings | |
Bearings - Ball - 440C Stainless 6000 / 6200 / 6300 Series (Relevance 7/10)
Stainless Steel 440C Grade - Hardened - Precision - Corrosion Resistant.
Single Row Radial Ball Bearings. Not all bearings are readily available. Please enquire.
|
Bearings - Ball - Single Row - Radial - Economy (Relevance 7/10)
Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.
Single Row Radial Ball Bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.
|
Bearings - Ball - Single Row - Radial - Flanged (Relevance 7/10)
Stainless and Chrome Steel Bearings with Flanges.
Single Row Radial Ball Bearings. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.
|
Bearings - Ball - Single Row - Radial - Unflanged (Relevance 7/10)
Stainless and Chrome Steel Bearings.
Single Row Radial Ball Bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.
|
Bearings - Specialty | |
Bearings - Acetal - with 302 Stainless Steel Balls (Relevance 7/10)
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.
|
Bearings - Acetal - with 316 Stainless Steel Balls (Relevance 7/10)
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.
|
Bearings - Acetal - with Glass Balls (Relevance 7/10)
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.
|
Bearings - Ball - 304 Stainless Steel (Relevance 7/10)
Corrosion and Heat resistance - Non Magnetic - Unhardened.
Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.050 mm / -0.000 mm OD +0.000 mm / -0.030 mm Width +0.000 mm /- 0.120 mm. Low load, low speed applications requiring maximum corrosion resistance. Non Magnetic. Cages, balls, races and shields from AISI 304 Stainless Steel.
|
Bearings - Ball - 316 Stainless Steel (Relevance 7/10)
Food and Medical grade Stainless Steel - Non Hardenable.
Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.0762 mm / -0.000 mm OD +0.000 mm / -0.0762 mm Width +/- 0.127 mm. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races.
|
Bearings - Ball - 4 Point Contact (Relevance 7/10)
4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.
|
Bearings - Ball - Double Row - Angular Contact (Relevance 7/10)
Double Row Ball Bearings - Angular Contact.
|
Bearings - Ball - Double Row - Radial (Relevance 7/10)
|
Bearings - Ball - Double Row - Self Aligning (Relevance 7/10)
|
Bearings - Ball - Single Row - Angular Contact (Relevance 7/10)
Inclusing miniature sizes down to 8mm from stock and even smaller available.
|
Bearings - Ball - Single Row - Radial - Flanged - High Precision (Relevance 7/10)
Stainless and Chrome Steel Bearings with Flanges - Abec 5 and Abec 7.
Single Row Radial Ball Bearings. Miniature sizes from 1mm bore to over 50mm bore. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).
|
Bearings - Ball - Single Row - Radial - Unflanged - High Precision (Relevance 7/10)
Stainless and Chrome Steel Bearings - Abec 5 and Abec 7.
Single Row Radial Ball Bearings. Miniature sizes from 1mm bore to over 50mm bore. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).
|
Bearings - Ball - Single Row - Self Aligning (Relevance 7/10)
Includes miniature sizes from 6mm bore.
|
Bearings - Ball - Textile Industry (Relevance 7/10)
Special Design Stainless and Chrome Steel Bearings for the Textile Industry.
Bearings in this category often have special features. Not all Bearings are readily available. Please enquire. Designed for use in textile industry machinery.
|
Bearings - Thrust | |
Bearings - Thrust - Ball (Relevance 7/10)
3 Piece Thrust Bearings, Shielded and Unshielded.
|
Bearings - Thrust - Ball - Banded (Relevance 7/10)
|
Bearings - Thrust - Ball - Retainer and Balls Only (Relevance 7/10)
Match with thrust washers of the same bore and OD.
|
Bearings - Thrust - Ball - Washers Only (Relevance 7/10)
Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.
Stainless Steel Washers are hardened to HRC38.42. Carbon Steel Washers are hardened to RC59.61.
|
Castors | |
Ball Transfer Units - Base Mount - Standard Duty (Relevance 7/10)
For conveying materials.
|
Ball Transfer Units - Flange Mount - Standard Duty (Relevance 7/10)
For conveying materials. From miniature to large.
|
Ball Transfer Units - Heavy Duty (Relevance 7/10)
For conveying materials. From miniature to large.
|
Ball Transfer Units - Screw Stem (Relevance 7/10)
For conveying materials. From miniature to large.
Measuring equipment. Lightweight coilhander. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.
|
Ball Transfer Units - Spring Loaded (Relevance 7/10)
For conveying materials. From miniature to large.
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
|
Ball Transfer Units - Threaded Body (Relevance 7/10)
For conveying materials. From miniature to large.
Measuring equipment. Lightweight coilhander. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms. Minimum order currently 500 pieces.
|
Castors - Ball - Standard (Relevance 7/10)
|
Castors - Plate - Ball - Light Duty (Relevance 7/10)
|
Castors - Plate - Ball Bearings - Heavy Duty (Relevance 7/10)
|
Castors - Plate - Ball Bearings - Light Duty (Relevance 7/10)
|
Castors - Plate - Ball Bearings - Light Medium Duty (Relevance 7/10)
|
Castors - Plate - Ball Bearings - Medium Duty (Relevance 7/10)
|
Castors - Plate - Ball Bearings - Medium Heavy Duty (Relevance 7/10)
|
Castors - Plate - General Purpose - Ball Bearing - Light Medium Duty (Relevance 7/10)
|
Castors - Stud - Ball - Light Duty (Relevance 7/10)
|
Couplings | |
Couplings - Ball (Relevance 7/10)
High Speed - Up to 15 Degrees Angular Offset. 0.17 to 22.6 N.m Torque. Up to 20,000 rpm.
Speed Ratings :. 20000 RPM at up to 5 Degree Operating Angle. 10000 RPM at 6 to 10 Degree Operating Angle (Torque Reduction 50%). 5000 RPM at 11 to 15 Degree Operating Angle (Torque Reduction 66%). Nylon centred units provide electrical insulation between shafts.
|
Couplings - Cross Joint (Relevance 7/10)
0.5 to 10 N.m. 3600 to 6000 rpm.
Bushings - Dry Bush Bearing. Stainless Steel Spacers. Steel Pins. Aluminium Alloy Hubs.
|
Fasteners | |
Joints - Clevis - Plastic (Relevance 7/10)
Use with plastic rod ends - Includes pin and clip. See also yokes.
Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.
|
Joints - Clevis - Spring Clips (Relevance 7/10)
Made from 9SMn steel.
Steel 9 SMn 28K (550-700 N/mm2). See also yokes.
|
Joints - Clevis - Stainless Steel (Relevance 7/10)
Stainless 1.4305 Stainless Steel Clevis assembly supplied complete with stainless pin. See also yokes.
|
Joints - Clevis - Steel (Relevance 7/10)
Made from zinc plated 9SMn steel.
Steel 9 SMn 28K (550-700 N/mm2). Zinc plate and clear passivated. Pin not included. See also yokes.
|
Joints - Dual Eye - Parallel (Relevance 7/10)
Maintenance free - self lubricating thermoplastic. Mechanical joining linkage. Self aligning to compensate for angular misalignment. MSTS = Maximum Static Tensile Strength. MSAS = Maximum Static Axial Compressive Strength.
|
Socket Set Screws - Flat Ball Tip (Relevance 7/10)
Grub screws with a rotating flat tip. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Rolling Ball Tip (Relevance 7/10)
Rolling ball tip for locating into a hole
|
Studs - Ball - Threaded (Relevance 7/10)
Zinc Plated Steel DIN 71803 Form C Surface Hardened to 55 HRC (Ball (D1) Only - Thread is Not Hardened)
|
Handles and Knobs | |
Knobs - Ball - Knock On - Phenolic (Relevance 7/10)
Moulded from black phenolic resin.
Light Weight. Thermal insulating. Non corrosive. POK Type have a ribbed insert. Shaft should be 0 to 0.007 mm undersized for best results 712 Type suit standard metric rod
|
Knobs - Ball - Novo-Grip - Female (Relevance 7/10)
Ergonomic Shape for easy gripping
Unique styling for a very distinctive look Belt fluting for non-slip gripping Black thermoplastic with steel or stainless steel inserts
|
Knobs - Ball - Novo-Grip - Male (Relevance 7/10)
Ergonomic Shape for easy gripping
Unique styling for a very distinctive look Belt fluting for non-slip gripping Black thermoplastic with steel or stainless steel studs
|
Knobs - Ball - Threaded - Lateral Grooved (Relevance 7/10)
Moulded platic control ball handles for machine tools, jigs, fixtures etc.
Stylish grooves to assist with grip Brass threaded insert
|
Knobs - Ball - Threaded - Phenolic (Relevance 7/10)
Moulded from black or red phenolic resin.
Light Weight. Thermal insulating. Non corrosive.
|
Knobs - Ball - Threaded - Phenolic with Shank (Relevance 7/10)
|
Knobs - Ball - Threaded - Plastic with Groove (Relevance 7/10)
Black plastic ball knobs with a groove around the circumference Brass threaded insert
|
Knobs - Ball - Threaded - Plastic with Knurl (Relevance 7/10)
Brass threaded insert Knurled circumference to assist with grip
|
Knobs - Ball - Threaded - Polished Aluminium (Relevance 7/10)
DIN319 Tapped aluminium
Polished with a flash chrome finish
|
Knobs - Ball - Threaded - Polished Steel (Relevance 7/10)
|
Knobs - Ball - Threaded - Polished or Raw Brass (Relevance 7/10)
CDA 360 Free Machining Brass
Polished balls are fully finished and suitable for decorative and display purposes
|
Knobs - Ball - Threaded - Recessed Top (Relevance 7/10)
Brass threaded insert Phenolic
|
Knobs - Ball - Threaded - Soft Touch (Relevance 7/10)
Rugged thermoplastic construction with a soft feel. Moulded with a soft rubber shell providing a sure grip Zinc plated steel insert
|
Knobs - Ball - Threaded - Stainless Steel (Relevance 7/10)
303 stainless steel (European grade 1.4305)
|
Knobs - Ball - Threaded - Thermoplastic (Relevance 7/10)
With moulded plastic threads, or metalic threaded inserts - brass or steel
|
Knobs - Ball - Threaded - Wrench Flats and Knob-Lok (Relevance 7/10)
Unique Knob-Lok features a nylon locking element that resists vibration and prevents back-off
Perfect for high vibrational applications
|
Housings to Suit Ball Bearings | |
Housings - Bearing - 2 Bolt Mounting Plates (Relevance 7/10)
Chromic Anodised Aluminium mounting plates.
For standard radial ball bearings.
|
Housings - Bearing - Blocks - Nylon (Relevance 7/10)
Moulded Nylon 101 Housing. Suit miniature bearings.
Inexpensive retention of small flanged radial bearings or bushes. Standard flanged bearings snap into these bearing blocks. Not intended for precision applications. A small drop of adhesive may be required to ensure bearing remains in place.
|
Housings - Bearing - Double Assembly - Circlip Retained (Relevance 7/10)
Includes bearings.
Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.
|
Housings - Bearing - Flanged - Miniature (Relevance 7/10)
Chromic Anodised Aluminium double or single flanged housings.
For standard radial ball bearings.
|
Housings - Bearing - Hanger - Miniature (Relevance 7/10)
Chromic Anodised Aluminium hanger housings.
For standard radial ball bearings.
|
Housings - Bearing - Single Assembly (Relevance 7/10)
Includes bearings.
Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with a bearing fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.
|
Housings - Bearing - Single Assembly - Circlip Retained (Relevance 7/10)
Includes bearings.
Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.
|
Housings - Bearing - Square - Miniature (Relevance 7/10)
Aluminium housings to suit standard radial ball bearings.
Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.
|
Linear Ball Splines | |
Linear Ball Splines - Bearings - Flanged (Relevance 7/10)
Use with Linear Ball Spline Shaft.
|
Linear Ball Splines - Bearings - Unflanged (Relevance 7/10)
Use with Linear Ball Spline Shaft.
|
Linear Ball Splines - Shaft (Relevance 7/10)
Use with either flanged or unflanged Linear Ball Spline Bearings.
|
Linear Drive Systems - Ballscrew | |
Screws - Ball - 16mm Diameter (Relevance 7/10)
16mm Diameter with pitches 2.5 to 20mm. Machined or unmachined ends. Nuts sold seperately.
Material : Cf53 induction hardened to HRC 62 (=/- 2). Pitch accuracy : <= 0.1mm / 300mm ISO class 7. Nuts sold seperately.
|
Screws - Ball - 16mm Housing - Base Type (Relevance 7/10)
Use with bush type ball nuts.
Antibacklash. Repeatability <0.01mm, accuracy <0.1mm/300mm when used with our screws. Hardened ground and polished Cf53 steel.
|
Screws - Ball - 16mm Housing - Flanged (Relevance 7/10)
Use with bush type ball nuts.
Antibacklash. Repeatability <0.01mm, accuracy <0.1mm/300mm when used with our screws. Hardened ground and polished Cf53 steel.
|
Screws - Ball - 16mm Nuts - Bush Type (Relevance 7/10)
Antibacklash. Repeatability <0.01mm, accuracy <0.1mm/300mm when used with our screws. Hardened ground and polished Cf53 steel.
|
Screws - Ball - 16mm Nuts - Pillow Block (Relevance 7/10)
Includes ball nut.
Antibacklash. Repeatability 0.01mm, accuracy 0.1mm/300mm when used with our 16mm screws. Hardened ground and polished Cf53 steel to HRC62 +/-2. Balls hardened HRC63 +/- 2.
|
Screws - Ball - Economy - Rolled - Nut Only (Relevance 7/10)
Match with screw. Accuracy T7 50µm/300mm.
Steel 16 MnCr5 or 100Cr6. Size, length of screw and end bearing configurations will affect the resulting loads and speeds. Backlash 0.01 Percent of lead. Accuracy T7 50µm/300mm. Blank sleeve supplied in nut to retain balls. Do not remove without simultaneous assembly to screw.
|
Screws - Ball - Economy - Rolled - Screw Only (Relevance 7/10)
Match with nut. Accuracy T7 50µm/300mm.
Longer lengths available on request (up to 5600mm). Steel Cf53 or Cf60 induction hardened and polished. Running trach hardened to 60 HRC. Profile: Gothic type rolled. Accuracy T7 50µm/300mm.
|
Screws - Ball - Precision - Miniature (Relevance 7/10)
Myonic precision ballscrew and nut assemblies.
Ground thread. Low starting and running torque. Backlash of only a few microns, optional zero backlash or preload of nuts.
|
Screws - Ball - Precision - Rolled (Relevance 7/10)
With pre-loaded (0.02CA) Nut (Cp5 23um/300mm).
All steel construction except end wipers in Nitrile Rubber. Single nut according to DIN 69051 (1989) with flange form B. Max. running temperature 80°C. Preload by ball selection (G0 pre-loaded) Fao = 0.02Ca. Precision accuracy Cp5 23µm/300mm ISO 3408-3.
|
Screws - Ball - Thomson Saginaw (Relevance 7/10)
Offer 90% efficiency converting rotary to linear motion with low coefficient of friction.
When replacing screws, hydraulics or pneumatics, they allow the use of smaller, less expensive drive motors and reduce the need for auxiliary equipment. Offer dependable accuracy and repeatability, Made off high quality alloy steel, hardened to Rockwell 56-60C.
|
Linear Motion Bearings | |
Bearings - Linear - Ball (Relevance 7/10)
Adjustable and fixed types - open for running on a supported rail and closed for fixed shafts.
Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 Deg C Intermittent, 80 Deg C continuous.
|
Bearings - Linear - Ball - Ceramic Coated (Relevance 7/10)
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling.
|
Bearings - Linear - Ball - Miniature - High Precision (Relevance 7/10)
High Precision Corrosion Resistant Miniature Linear Bearings.
High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.
|
Bearings - Linear - Ball - Thomson Precision Steel (Closed) (Relevance 7/10)
For running on shafts fixed at the ends.
|
Bearings - Linear - Ball - Thomson Precision Steel (Open) (Relevance 7/10)
For running on shafts supported by a rail along their length.
|
Bearings - Linear - Ball - Thomson Super (Closed) (Relevance 7/10)
For running on shafts fixed at the ends.
|
Bearings - Linear - Ball - Thomson Super (Open) (Relevance 7/10)
For running on shafts supported by a rail along their length.
|
Bearings - Linear - Ball - Thomson Super Smart (Closed) (Relevance 7/10)
For running on shafts fixed at the ends.
|
Bearings - Linear - Ball - Thomson Super Smart (Open) (Relevance 7/10)
For running on shafts supported by a rail along their length.
|
Linear Slides | |
Slides - Linear - Non Recirculating Ball - Rack and Pinion (Relevance 7/10)
Slides: Stainless Steel End Stop, Retainer, Rack and Pinion: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100°C (Constant), +120°C (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.
|
Slides - Linear - Non Recirculating Ball - Standard (Relevance 7/10)
The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.
Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100°C (Constant), +120°C (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.
|
Slides - Linear - Recirculating Ball - Standard (Relevance 7/10)
The BSR precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.
Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100°C (Constant), +120°C (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants. Note BSR1530SL and BSR2040SL can not be mounted from inside of track rail.
|
Mounts and Vibration Control | |
Mounts - Leveling Carry - Ball Type (Relevance 7/10)
Vibration Dampening with retractable ball for movement.
Carry mount is a moveable mount in which the rubber mount is incorporated with a rotating ball. Allows movement of machines and provides vibration dampening. Simply turn the adjusting hole with a screwdriver to lift or lower the ball.
|
Parallel | |
Parallels - Ball (Relevance 7/10)
Used for handling large work in drill presses or band saw machines.
Placed between work and machine so work can be easily moved. Black Oxide finish with 9.525mm hardened steel balls. Balls are exposed both sides of sheet.
|
Rod Ends | |
Rod Ends - Heavy Duty - Ball (Relevance 7/10)
With integral self aligning ball bearing.
With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20ºC to +120ºC.
|
Rod Ends - Heavy Duty - Ball - Enlarged Eye (Relevance 7/10)
With integral self aligning ball bearing.
With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20ºC to +120ºC.
|
Rod Ends - Heavy Duty - Ball - Reduced Eye (Relevance 7/10)
With integral self aligning ball bearing.
With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20ºC to +120ºC.
|
Rope and Cable | |
Attachments - Ball Plugs (Relevance 7/10)
F and L dimensions are obtained after swaging. Before swaging the fitting is round.
|
Spacers | |
Joints - Tee - Tubing and Rod (Relevance 7/10)
Inexpensive nylon joiners for hobby tubing and rod
|
Splined Shafts and Bushes | |
Splines - Ball - Telescoping (Relevance 7/10)
|
Springs | |
Plungers - Spring - Smooth (Relevance 7/10)
Stainless Steel or Plastic - No Thread.
Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.
|
Plungers - Spring - Smooth - Double Ended (Relevance 7/10)
|
Plungers - Spring - Striker Bushings (Relevance 7/10)
Use with ball or bolt spring plungers for a hard wearing contact area.
Burnished ground hardened steel.
|
Plungers - Spring - Threaded (Relevance 7/10)
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
|
Plungers - Spring - Threaded - With Limit Switch (Relevance 7/10)
Supply Cable : Grey Two Phase for normally open contacts, black for normally closed. Temp (Body): -40 deg C to 170 deg C Temp (Cable): -10 deg C to 50 deg C. Electrical Supply : 20 mA DC / 50 mA DC. Voltage : 24V Supply Cable 2.8mm - 2 Phase. Safety Standard : IP40 Average Switch Life Span : 56 Switching.
|
Universal Joints | |
Covers - Universal Joint - Elasticate Rubber (Relevance 7/10)
For Single and Double Universal Joints.
-27 Deg C to 70 Deg C temp range (constant). -32 Deg C to 120 Deg C temp range (intermittent).
|
Covers - Universal Joint - Neoprene Rubber (Relevance 7/10)
For Single and Double Universal Joints.
-27 Deg C to 70 Deg C temp range (constant). -32 Deg C to 120 Deg C temp range (intermittent).
|
Universal Joints - Inverted Design (Relevance 7/10)
|
Universal Joints - Inverted Design - Telescoping (Relevance 7/10)
|
Universal Joints - Needle Roller - Low Backlash (Relevance 7/10)
Steel 9SMn Pb36K. Forged centre cross with hard ground ends for needle bearings (needle bearings sealed). Max. Speed: 4,000 Rpm. See techincal pages for torques at different speed and angles.
|
Universal Joints - Plastic (Relevance 7/10)
Acetal with or without steel inserts.
|
Universal Joints - Plastic with Brass Inserts - Ondrives (Relevance 7/10)
Cross Piece and Inserts: Brass CZ121 Chromate and passivate finish. Body - Black Acetal Max Speed: 1000 Rpm. Temp. Range: -20 Deg C to +60 Deg C. Backlash Free up to 1000,000,000 Turns.
|
Universal Joints - Steel (Relevance 7/10)
Steel - Cast Zinc - Stainless Steel.
|
Universal Joints - Telescoping - Moulded (Relevance 7/10)
|
Universal Joints - Telescoping - Spline Type - Needle Roller (Relevance 7/10)
Max Speed 4000 RPM.
Steel 9SMn Pb36K DIN808-W. Max. Working Angle - 60 Deg. Max. Speed 4000 RPM.
|
Universal Joints - Telescoping - Spline Type - Stainless Steel (Relevance 7/10)
Heat Resistant & Corrosion Resistant. MATERIAL: Joints - 303 Stainless Steel; Spline - 416 Stainless Steel. Max. Working Angle - 60 Deg. Pin Joints.
|
Universal Joints - Telescoping - Spline Type - Steel (Relevance 7/10)
Max Speed 800 rpm.
Steel 9SMn Pb36K DIN808-G. Max. Working Angle - 60 Deg. Max Speed 800 rpm.
|
Universal Joints - Telescoping - Steel - Hand Operated (Relevance 7/10)
Steel 9SMn Pb36K. Hand motion only. Unhardened Pins.
|
Universal Joints - Telescoping - Zero Backlash (Relevance 7/10)
|
Ballscrew | |
KSS Ballscrew - Ground - Bi-Directional - Dia 10mm - Lead 2.0mm (Relevance 3/10)
Not for sale outside of Australia and New Zealand
|
KSS Ballscrew - Ground - Bi-Directional - Dia 12mm - Lead 2.0mm (Relevance 3/10)
Not for sale outside of Australia and New Zealand
|
KSS Ballscrew - Ground - Bi-Directional - Dia 4mm - Lead 1.0mm (Relevance 3/10)
Not for sale outside of Australia and New Zealand
|
KSS Ballscrew - Ground - Bi-Directional - Dia 6mm - Lead 1.0mm (Relevance 3/10)
Not for sale outside of Australia and New Zealand
|
KSS Ballscrew - Ground - Bi-Directional - Dia 8mm - Lead 1.0mm (Relevance 3/10)
Not for sale outside of Australia and New Zealand
|
|
