Miniature Mechanical Parts And Components Starting With G - Product Catalogue - Mini Bearings

Catalogue Index - Categories beginning with G Gas Springs - Adjustable Gas Springs - Adjustable - 50-540N Body: Semi Matt Black Epoxy Paint. Finish: Black. Adjusted by Grubscrew. Once discharged, the gas is not refillable. Supplied filled to maximum force. Gas Springs - Adjustable - Accessories See diagrams in main Gas Springs Categories. Gas Springs - Adjustable - Push Type - Max 100N Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 5mm. Available Force Range: 5N to 100N (comes standard with max. force). Gas Springs - Adjustable - Push Type - Max 180N Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 180N (comes standard with max. force). Gas Springs - Adjustable - Push Type - Max 400N Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 400N (comes standard with max. force). Gas Springs - Adjustable - Push Type - Max 700N Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 50N to 700N (comes standard with max. force). Gas Springs - Adjustable - Push Type - Max 1300N Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 80N to 1300N (comes standard with max. force). Gas Springs - Adjustable - Push Type - Max 2600N Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 100N to 2600N (comes standard with max. force). Gas Springs - Adjustable - Push Type - Max 5000N Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 500N to 5000N (comes standard with max. force). Gasket Cement Adhesives and Sealants - General Molytec, Loctite, Pacer, Dow Corning, 3M. Includes silicone sealant, gasket adhesive, canopy glue, belt conditioner and electronic tak-pak. Gauges - Joining Gauges - Joining - Rack Gauges to determine correct alignment of ground racks. 20 Degree Pressure Angle. Gauges - Tension Belt Tension Tester For testing the tension on assembled timing belts, vee belts, flat belts etc. Gear and Dial Hubs Hubs - Gear and Dial - Removable Type Hubs - Gear and Dial - Single Gear Blanks Gears - Blanks Blanks for cutting gears and pulleys and friction drives. Gear Clamps Clamps - Gear - Screw Type Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears. Clamps - Gear - Split Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears. Clamps - Gear - Two Piece - Commercial Balanced Commercial - Stainless - Aluminium - Carbon Steel - For our clamp type gears. Clamps - Gear - Two Piece - Precision Balanced Precision - Stainless - Aluminium - Carbon Steel - For our clamp type gears. Gear Hubs Hubs - Gear and Dial - Double Hubs - Gear and Dial - Removable Type Hubs - Gear and Dial - Single Gear Pullers Tools - Pullers - Small Small pullers for miniature bearings, gears, pulleys, sprockets and other pressed on parts. Gear Sets - Hobby Assortment Kits - Various Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins Gear Stock - Spur Gears - Pinion Wire - 24 Pitch Brass and carbon steel. Gears - Pinion Wire - 32 Pitch Brass and carbon steel. Gears - Pinion Wire - 44 Pitch Brass and carbon steel. Gears - Pinion Wire - 48 Pitch Brass and carbon steel. Gears - Pinion Wire - 64 Pitch Brass and carbon steel. Gears - Pinion Wire - Module 0.40 Brass. Gears - Pinion Wire - Module 0.50 Brass. Gears - Pinion Wire - Module 0.80 Brass. Gears - Spur - Stock - 20 Pitch Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - 24 Pitch Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - 32 Pitch Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - 48 Pitch Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - Module 0.40 Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - Module 0.50 Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - Module 0.80 Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - Module 1.00 Lengths of spur gear stock for manufacturing gears. Gear Type Couplings Couplings - Crowned Tooth Gear Type. 19.55 to 88 Nm. 8500 to 14000 rpm. Steel hubs with Moulded Nylon Sleeve. Couplings - Geargrip 0.67 to 6.78 Nm. Max speed 3000 rpm. Gearboxes - Basic Gearboxes - Light Duty - Base Mount Approx weight 115 grams. Discontinued group. Minimum quantities will apply to manufacture. Helical Gears. Brass Bearings. Backlash: 3 Deg Nominal - Max 8 Deg including endplay. Aluminium Alloy housing and base. Plated steel shafts. Gearboxes - Light Duty - Panel Mount Approx weight 115 grams. SRLP Series. Helical Gears. Brass Bearings. Backlash: 3 Deg Nominal - Max 8 Deg including endplay. Aluminium Alloy housing. Plated steel shafts. Gearboxes - Bu-Ord Gearboxes - Bu-Ord - Size 11 - Double End SRBO11 Series. Items listed as Zero Backlash are for loads less than the ZB Torque Limit shown. Gearboxes - Bu-Ord - Size 15 - Double End SRBO15 Series. Gearboxes - Bu-Ord - Size 15 - Single End SRBO15 Series. Gearboxes - Bu-Ord - Size 18 - Double End SRBO18 Series. Gearboxes - Bu-Ord - Size 18 - Single End SRBO18 Series. Gearboxes - Cross Axis Gearboxes - Cross Axis - 18.8 x 13.5 x 12.0mm PREM6 Series. Gearbox Case: Aluminium 6082 T6. Gears: Steel 817M40T condition. Gearboxes - Cross Axis - 38.9 x 31.8 x 19.1 Worm Gears - Precision. Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F). Gearboxes - Cross Axis - 47.0 x 40.0 x 22.0mm Worm and Wormwheel box. 1.4 to 2.5Nm. 5:1 to 120:1 ratios. P20 and PF20. Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel. Gearboxes - Cross Axis - 52 x 34 x 34 Helical or Wormwheel Gears. 6mm Bores. E20 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel: Aluminium Bronze (CA104 / AB2). Circlips: Steel (not plated). Bearing: Steel 2RS (Rubber seals fitted). Gearboxes - Cross Axis - 52.4 x 44.5 x 25.4 Worm Gears. Precision Quality - Input Speeds up to 6000 RPM. Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F). Gearboxes - Cross Axis - 70.0 x 60.0 x 28.0mm Worm and Wormwheel box. 2.5 to 8.8Nm. 5:1 to 120:1 ratios. P30 and PF30 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel. Gearboxes - Cross Axis - 77.8 x 63.5 x 34.9 Worm Gears. Precision Quality - Input Speeds up to 6000 RPM. Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F). Gearboxes - Cross Axis - 78 x 48 x 48 Helical or Wormwheel Gears. 10mm Bores. E30 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted). Gearboxes - Cross Axis - 83.3 x 76.2 x 44.5 Worm Gear - 64DP Precision. Max input speed 1000 RPM. Right or left hand. Can only be driven from input shaft. Maximum Backlash 30 minutes. Permanently Lubricated. Gearboxes - Cross Axis - 85.6 x 66.7 x 34.9 Worm Gears - Commercial size 26. Maximum input speed 1800 RPM. Approx weight 0.6 KG (20 oz). Gearboxes - Cross Axis - 90.0 x 75.0 x 32.0mm Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel. Gearboxes - Cross Axis - 104 x 63 x 63 Helical or Wormwheel Gears. 15mm Bores. E40 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted). Gearboxes - Cross Axis - 110.0 x 95.0 x 38.0mm Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel. Gearboxes - Cross Axis - 130 x 80 x 80 Helical or Wormwheel Gears. 20mm Bores. E50 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted). Gearboxes - Cross Axis - 130.0 x 110.0 x 46.0mm Worm and Wormwheel box. 13.4 to 57.0Nm. 5:1 to 120:1 ratios. P55 and PF55 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel. Gearboxes - Cross Axis - 136.5 x 111.1 x 63.5 Worm gears. Maximum input speed 1800 RPM. Approx weight 2.7 KG (6 lb). Gearboxes - Cross Axis - 150 x 96 x 96 A Helical or Wormwheel Gears. 25mm Bores. E60 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted). Gearboxes - Cross Axis - 150 x 96 x 96 B Helical or Wormwheel Gears. 30mm Bores. E60B Series. Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted). Gearboxes - Cross Axis - 150.0 x 125.0 x 54.0mm Worm and Wormwheel box. 30.0 to 118.0Nm. 5:1 to 120:1 ratios. P60 and PF60 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel. Gearboxes - Cross Axis - 170.0 x 145.0 x 60.0mm Worm and Wormwheel box. 38.0 to 164.0Nm. 5:1 to 120:1 ratios. P70 and PF70 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel. Gearboxes - Inline Gearboxes - Basic Inline and Offset SRBI and SRBO Series. Steel Shafts. Steel Gears. Bronze Bearings. Max Backlash 2 Degree at output. Weight 20mm = 20gram / 27mm = 40gram / 42mm = 65gram. Gearboxes - Inline - 27 x 45mm J27 Series. Miniature gearbox. Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 60g. Backlash: Depends on ratio. Hours Life: 12000 hr. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 50 x 30mm J51 Series. End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: J51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 50 x 40mm J52 Series. End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 50 x 40mm Hi Torque JHD51 Series. Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: JHD51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 50 x 50mm J53 Series. Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 60 x 56mm NT61 Series. Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 60 x 70mm NT62 Series. Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 60 x 84mm NT63 Series. Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 63 x 40mm J64 Series. End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 63 x 50mm J65 Series. End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 63 x 60mm J66 Series. End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 90 x 74mm NT91 Series. Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 90 x 94mm NT92 Series. Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 112.0 x 52.0 Low Backlash Taper Gears - Weight: 1.50kg. TG112 Series. Case: Anodised Aluminum 6082. Taper Gears: 817M40T High Carbon Steel. Weight: 1.50kg. Output Backlash: <= 8 arc/min at output. Max Input Speed: 3000 Rpm. Gearboxes - Inline - 114 x 90mm NT121 Series. Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 120 x 103mm NTB121 Series. Case: Aluminium, Gear: 655M13 Hardened. Weight: 1.63/3.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 120 x 120mm NT122 Series. Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - 120 x 160mm NTB122 Series. Case: Aluminium, Gear: 655M13 Hardened. Weight: 4/5kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. Gearboxes - Inline - Epicyclic Gearboxes - Inline - Epicyclic - 57.0 x 45.0 x 45.0mm Servo Gearbox 3.4Nm to 7Nm ratios 3:1 - 6:1. EHD04 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 0.44kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV. Gearboxes - Inline - Epicyclic - 78.0 x 60.0 x 60.0mm Servo Gearbox 8Nm to 19Nm ratios 3:1 - 6:1. EHD06 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 0.96kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV. Gearboxes - Inline - Epicyclic - 80.0 x 75.0 x 75.0mm Servo Gearbox 20Nm to 50Nm ratios 3:1 - 6:1. EHD08 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 1.4kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV. Gearboxes - Inline - Epicyclic - 115.0 x 75.0 x 75.0mm Servo Gearbox 35Nm to 50Nm ratios 9:1 - 36:1. EHD08 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 2.1kg Backlash: 1°30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV. Gearboxes - Inline - Epicyclic - 134.0 x 108.0mm Servo Gearbox 60Nm to 140Nm ratios 3:1 - 6:1. EHD12 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Backlash: 30'. Max Input Speed: 3,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV. Gearboxes - Inline - Epicyclic - 160.0 x 135.0mm Servo Gearbox 180Nm to 380Nm ratios 3:1 - 6:1. EHD16 Series. Case: Steel. Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 18.86kg Backlash: 30'. Max Input Speed: 2,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV. Gearboxes - Offset Gearboxes - Basic Inline and Offset SRBI and SRBO Series. Gearboxes - Offset - 58 x 46 x 24 FF10 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 0.226kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only. Gearboxes - Offset - 60 x 60 Base mounted. SRBM60 Series. Die cast aluminium Housing. Steel Shafts. Bearings Input / Output : Ball / Sintered Bronze. Steel and Phenolic Gears. Shaft Play Radial / Thrust : <= 0.1mm / <=0.3mm. Operating Temp : -10 to 60 Deg C | Approx weight : 26 grams. Gearboxes - Offset - 80 x 64 x 32 FF15 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 0.55kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only. Gearboxes - Offset - 117 x 100 x 48 FF20 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 1.9kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only. Gearboxes - Offset - 175 x 150 x 60 FF30 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight 5.5kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only. Gearboxes - Offset - 236 x 190 x 90 FF40 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only. Gearboxes - Offset - 310 x 240 x 100 FF50 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight 26.3kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only. Gearboxes - Output Shafts Gearboxes - Output Shafts For use in Cross Axis gearboxes with bores. P and PF Series. Stainless 303 shaft. Steel keys and circlips. P-X and P-DX types suitable for P and PF type gearboxes (cross axis types). Gearboxes - Power Gearboxes - Power - Mounting Feet Optional mounting feet for power gearboxes. Power gearboxes must be mounted firmly to the base because the power density is very high. The boxes can be mounyted using the 4 tapped holes in the unit. Optionally, these mounting feet can be used to provide more stability. Supplied in sets of 2 pieces with 4 screws. Gearboxes - Power - Series FH VP.FH Series. Casing: Spheroidal graphite iron. Gearboxes - Power - Series FL VP.FL Series. Casing: Spheroidal graphite iron. Gearboxes - Power - Series H VP.H Series. Casing: Spheroidal graphite iron. Gearboxes - Power - Series H Reinforced Design VX.H Series. Casing: Spheroidal graphite iron. 1:1 Ratio only. Gearboxes - Power - Series L VP.L Series. Casing: Spheroidal graphite iron. Gearboxes - Power - Series L Reinforced Design VX.L Series. Casing: Spheroidal graphite iron. 1:1 Ratio only. Gearboxes - Right Angle Gearboxes - Right Angle - 30.0 x 30.0 x 18.0mm Economy Bevel Gear Type. Miniature gearbox. Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel. Gearboxes - Right Angle - 30.5 x 30.5 x 18.7mm Bevel Gears - 1:1 Ratio. B332 Series. Miniature gearbox. 1:1 Ratio Only / 4mm Shafts. Min Torque 0.5 Ncm. Backlash Approx 2 Degrees. Approx Max Temperature 80 Deg C. Suitable for manual and short term drive application. Gearboxes - Right Angle - 36.5 x 36.5 x 29.4mm 1:1 ratio. GDRA Series. Miniature gearbox. Gearboxes - Right Angle - 40.0 x 40.0 x 20.0mm Mitre Gears 1:1 ratio. GDRA Series. Miniature gearbox. Max Speed 3000 RPM. Max Backlash 1 Degree. Ball bearings both ends. Base mounting both sides. Gearboxes - Right Angle - 40.0 x 40.0 x 25.0mm BLH20 Series. Miniature gearbox. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 40.0 x 40.0 x 25.0mm (B) Economy Bevel Gear Type. GDRA Series. Miniature gearbox. Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel. Gearboxes - Right Angle - 50.0 x 50.0 x 30.0mm Economy Bevel Gear Type. GDRA Series. Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel. Gearboxes - Right Angle - 55.0 x 55.0 x 34.0mm BLH30 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 60.0 x 60.0 x 30.0mm Mitre Gears 1:1 ratio. GDRA Series. Max Speed 3000 RPM. Max Backlash 1 Degree. Ball bearings both ends. Base mounting both sides. Gearboxes - Right Angle - 62.5 x 50.8 x 30.0mm Bevel Gears - Plastic Housing. GDLBP Series. Max Backlash 5 Degrees. Gearboxes - Right Angle - 63.0 x 63.0 x 40.0mm Economy Bevel Gear Type. GDRABE Series. Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel. Gearboxes - Right Angle - 75.0 x 44.0 x 44.0mm Bevel Gears - 1.6 Nm-5.0 Nm ratios 6:1 to 24:1. BLN20 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 75.0 x 75.0 x 44.0mm BLH40 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 80.0 x 80.0 x 40.0mm Mitre Gears 1:1 ratio. GDRA Series. Max Speed 3000 RPM. Max Backlash 1 Degree. Ball bearings both ends. Base mounting both sides. Gearboxes - Right Angle - 82.0 x 62.0 x 40.0mm GDRHD Series. Max Rated Speed 3600 RPM - Reversible / Unit weight 0.4kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C. Gearboxes - Right Angle - 85.5 x 77.8 x 31.8mm Bevel Gears - Plastic Housing. GDLBP Series. Max Backlash 5 Degrees. Gearboxes - Right Angle - 87.0 x 66.0 x 60.0mm 1 : 1 ratio only. BL18 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV. Weight: 1.3kg. Gearboxes - Right Angle - 98.0 x 60.0 x 60.0mm Bevel Gears - 5 Nm-15 Nm ratios 6:1 to 24:1. BLN30 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 100.0 x 100.0 x 60.0mm BLH50 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 125.0 x 125.0 x 80.0mm BLH60 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 132.0 x 80.0 x 80.0mm Bevel Gears - 13 Nm-43 Nm ratios 6:1 to 24:1. BLN40 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 140.0 x 107.0 x 66.0mm GDRHD Series. Max Rated Speed 3600 RPM - Reversible / Unit Weight 1.8kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C. Gearboxes - Right Angle - 140.0 x 140.0 x 98.0mm BLH70 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 166.0 x 128.0 x 76.0mm GDRHD Series. Max Rated Speed 3600 RPM - Reversible / Unit Weight 3.1kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C. Gearboxes - Right Angle - 190.0 x 120.0 x 120.0mm Bevel Gears - 40.6 Nm-110 Nm ratios 6:1 to 24:1. BLN50 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 245.0 x 160.0 x 160.0mm Bevel Gears - 86 Nm-270 Nm ratios 6:1 to 24:1. BLN60 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Right Angle - 300.0 x 200.0 x 200.0mm Bevel Gears - 215 Nm-550 Nm ratios 6:1 to 24:1. BLN70 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee Gearboxes - Tee - 36.5 x 36.5 x 29.4mm GDRAB Series. Miniature gearbox. Gearboxes - Tee - 38.9 x 38.1 x 27.0mm A Worm Gear. WG11 Series. Miniature gearbox. Maximum input speed 2000 RPM. Maximum Backlash 5 Degrees. Worm Gears. Gearboxes - Tee - 38.9 x 38.1 x 27.0mm B 1:1, 2:1 and 3:1 ratios. GDRA Series. Miniature gearbox. Max Speed 2000 RPM. Max Backlash 5 Degrees. Bevel Gears. Gearboxes - Tee - 40.0 x 40.0 x 25.0mm BLHT20 Series. Miniature gearbox. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 55.0 x 40.0 x 25.0mm Bevel Gears - 0.53 to 1.77 Nm. BLHM20 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 55.0 x 55.0 x 34.0mm BLHT30 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 62.5 x 50.8 x 30.0mm Bevel Gears - Plastic Housing. GDLBP Series. Max Backlash 5 Degrees. Gearboxes - Tee - 65.0 x 50.0 x 50.0mm BL8 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV. Gearboxes - Tee - 70.0 x 70.0mm Lengths from 90 to 120mm. BL15 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV. Gearboxes - Tee - 74.0 x 55.0 x 34.0mm Bevel Gears - 1.32 to 4.40 Nm. BLHM30 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 75.0 x 50.0 x 50.0mm BL8 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV. Gearboxes - Tee - 75.0 x 75.0 x 44.0mm BLHT40 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 80.0 x 60.0 x 50.0mm BL8 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV. Gearboxes - Tee - 82.0 x 74.0 x 40.0mm GDRHD Series. Max Rated Speed 3600 RPM - Reversible / Unit Weight 0.5kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C. Gearboxes - Tee - 85.5 x 77.8 x 31.8mm Bevel Gears - Plastic Housing. GDLBP Series. Max Backlash 5 Degrees. Gearboxes - Tee - 100.0 x 75.0 x 44.0mm Bevel Gears - 3.0 to 10.3 Nm. BLHM40 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 100.0 x 100.0 x 60.0mm BLHT50 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 125.0 x 125.0 x 80.0mm BLHT60 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 135.0 x 100.0 x 60.0mm Bevel Gears - 7.7 to 30.0 Nm. BLHM50 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 140.0 x 132.0 x 66.0mm GDRHD Series. Max Rated Speed 3600 RPM - Reversible / Unit Weight 2.2kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C. Gearboxes - Tee - 140.0 x 140.0 x 98.0mm BLHT70 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 166.0 x 160.0 x 76.0mm GDRHD Series. Max Rated Speed 3600 RPM - Reversible / Unit Weight 3.4kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C. Gearboxes - Tee - 170.0 x 125.0 x 80.0mm Bevel Gears - 19.0 to 70.0 Nm. BLHM60 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Gearboxes - Tee - 180.0 x 140.0 x 98.0mm Bevel Gears - 26.0 to 128.0 Nm. BLHM70 Series. Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2. Geargrip Couplings Couplings - Geargrip 0.67 to 6.78 Nm. Max speed 3000 rpm. Gearhead Attaching Clamps Clamps - Gearhead Attaching Gearheads - Bu-Ord Gearheads - Bu-Ord Size 8 - Heavy Duty Ball bearings used throughout. Gearheads - Bu-Ord Size 11 Ball bearings used throughout. Pat Nos 2892357 and 3396594. Gearheads - Bu-Ord Size 11 - Heavy Duty Ball bearings used throughout. Gearheads - Bu-Ord Size 15 Ball bearings used throughout. Pat No 2892357. Gearheads - Bu-Ord Size 15 - Heavy Duty Ball bearings used throughout. Gearheads - Bu-Ord Size 18 Ball bearings used throughout. Pat No 2892357. Gearheads - Bu-Ord Size 18 - Heavy Duty Ball bearings used throughout. Gearheads - Inline Gearheads - Inline - 12 mm x Various Lengths 12mm Diameter - Suits 1mm Motor shaft. Input and Output shafts have same centre line. Input and output in same direction. Requires 0.15 Module pinion as shown in tables. Suits 1mm Motor Shaft. Gearheads - Inline - 16 mm x Various Lengths 16mm Diameter - Suits 1.5mm Motor Shaft. Input and Output shafts have same centre line. Input and output in same direction. Requires 0.15 Module pinion as shown in tables. Suits 1.5mm Motor Shaft. Gearheads - Inline - 20 x 21mm 20mm Diameter - Suits 2mm Motor Shaft. Input and output in same direction. Requires 0.25 Module pinion as shown in tables. Suits 2mm Motor Shaft. Gearheads - Inline - 22 mm x Various Lengths 22mm Diameter - Suits 2mm Motor Shaft. Input and output in same direction. Requires 0.25 Module pinion as shown in tables. Suits 2mm Motor Shaft. Gearheads - Inline - 27 x 21.6mm 27mm Diameter - Suits 2mm Motor Shaft. Input and output in same direction. Requires 0.2 Module pinion as shown in tables. Suits 2mm Motor Shaft. Gearheads - Inline - 37 mm x Various Lengths 37mm Diameter - Suits 2mm Motor Shaft. Input and output in same direction. Requires 0.5 Module pinion as shown in tables. Suits 2mm Motor Shaft. Gearheads - Inline - 42 x 31.5mm 42mm Diameter - Suits 3mm Motor Shaft. Input and output in same direction. Requires 0.4 Module pinion as shown in tables. Suits 3mm Motor Shaft. Gearheads - Inline - 42.5 x 11.3mm 42mm Diameter - Suits 2mm Motor Shaft. Can be used as replacement gearheads for --- Gearmotors - DC - Size 42 Light Duty. Use with pinion gear GS0.30-10-0200B0200-BR-N (0.3 module). Suits 2mm Motor Shaft. Gearheads - Inline - 43 mm Square x Various Lengths 43mm Square - Suits 4mm Motor Shaft. Can be used as replacement gearheads for --- Gearmotors - DC - Size 43. Requires 0.6 Module pinion as shown in tables. Suits 4mm Motor Shaft. Gearheads - Inline - 48 mm Square x 28.2mm 48mm Square - Suits 3mm Motor Shaft. Can be used as replacement gearheads for --- Gearmotors - DC - Size 48. Requires 0.4 Module pinion as shown in tables. Suits 3mm Motor Shaft. Gearheads - Inline - 50 x 30mm Drilled and Tapped to suit your motor register. End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: J51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 50 x 40mm Drilled and Tapped to suit your motor register. End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 50 x 40mm Hi Torque Drilled and Tapped to suit your motor register. Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: JHD51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 50 x 50mm Drilled and Tapped to suit your motor register. Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 60 mm Square x 36.2mm 60mm Square - Suits 4mm Motor Shaft. Can be used as replacement gearheads for --- Gearmotors - DC - Size 60 (D33S52M and D33S57M54 series). Requires 0.5 Module pinion as shown in tables. Suits 4mm Motor Shaft. Gearheads - Inline - 60 mm Square x Various Lengths 60mm Square - Suits 4mm Motor Shaft. Can be used as replacement gearheads for --- Gearmotors - A.C. Single Phase - Size 60. Can be used as replacement gearheads for --- Gearmotors - DC - Size 60 (D33S54M Series). Requires 0.5 Module pinion as shown in tables. Suits 4mm Motor Shaft. Gearheads - Inline - 60 x 56mm Drilled and Tapped to suit your motor register. Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 60 x 70mm Drilled and Tapped to suit your motor register. Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 60 x 84mm Drilled and Tapped to suit your motor register. Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 63 x 40mm Drilled and Tapped to suit your motor register. End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 63 x 50mm Drilled and Tapped to suit your motor register. End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 63 x 60mm Drilled and Tapped to suit your motor register. End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 90 x 74mm Drilled and Tapped to suit your motor register. Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 90 x 94mm Drilled and Tapped to suit your motor register. Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 114 x 90mm Drilled and Tapped to suit your motor register. Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - 120 x 120mm Drilled and Tapped to suit your motor register. Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit. Gearheads - Inline - Planetary - Size 17 - Precision Use with NEMA Size 17 Motors. Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Inline - Planetary - Size 17 - Standard Use with NEMA Size 17 Motors. Anodised aluminium housing - Heat Treated Steel Gears - Sealed ball bearings. Shaft loading 8.9kg (20 lbs) radial and 61kg (138 lbs) axial at 250rpm Output / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Inline - Planetary - Size 23 - Adapted With Nema and Non Nema Size Adaptors. Anodised aluminium housing - Heat Treated Steel Gears - Sealed ball bearings. Shaft loading 26kg (60 lbs) radial and 64kg (145 lbs) axial at 250rpm Output / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Inline - Planetary - Size 23 - Economy Use with NEMA Size 23 Motors. Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium Flanges. Shaft loading 66kg (150 lbs) radial and 66kg (150 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Inline - Planetary - Size 23 - Precision Use with NEMA Size 23 Motors. Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 154kg (347 lbs) radial and 153kg (344 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Inline - Planetary - Size 34 - Adapted With Nema and Non Nema Size Adaptors. Anodised aluminium housing - Heat Treated Steel Gears - Sealed ball bearings. Shaft loading 44kg (100 lbs) radial and 88kg (200 lbs) axial at 250 rpm output / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Inline - Planetary - Size 34 - Economy Use with NEMA Size 34 Motors. Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 132kg (300 lbs) radial and 132kg (300 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Inline - Planetary - Size 34 - Precision Use with NEMA Size 34 Motors. Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 388kg (875 lbs) radial and 376kg (849 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Inline - Planetary - Size 42 - Adapted With Nema and Non Nema Size Adaptors. Anodised aluminium housing - Heat Treated Steel Gears - Sealed ball bearings. Shaft loading 53kg (120 lbs) radial and 120kg (270 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Inline - Planetary - Size 56 - Economy Use with NEMA Size 56 Motors. Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 446kg (1000 lbs) radial and 446kg (1000 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Inline - Planetary - Size 56 - Precision Use with NEMA Size 56 Motors. Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 937kg (2100 lbs) radial and 937kg (2100 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Inline - Planetary - Size 60 - Adapted With Nema and Non Nema Size Adaptors. Maximum input speed 4000 rpm. Shaft loading 41kg (92 lbs) radial and 197kg (442 lbs) axial at 250rpm output. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 8 arc min, Double Stage : 9 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Inline - Planetary - Size 90 - Adapted With Nema and Non Nema Size Adaptors. Maximum input speed 4000 rpm. Shaft loading 53kg (120 lbs) radial and 289kg (648 lbs) axial at 250rpm output. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 8 arc min, Double Stage : 9 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Inline - Planetary - Size 115 - Adapted With Nema and Non Nema Size Adaptors. Maximum input speed 4000 rpm. Shaft loading 82kg (184 lbs) radial and 526kg (1180 lbs) axial at 250rpm output. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 8 arc min, Double Stage : 9 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Inline - Spur Gear - Size 23 Use with NEMA Size 23 Motors. Steel Housing - Aluminium Flanges - Stainless Steel Heat Treated Gears - Ball Bearings. Double Stage / Max 5000 RPM Input Speed. Continuous Torque 6.65 N.m (50 lb.in) / Peak Torque 13.3 N.m (100 lb.in). Min Efficiency 90% / Max. Backlash 20 min. Gearheads - Inline - Spur Gear - Size 34 Use with NEMA Size 34 Motors. Steel Housing - Aluminium Flanges - Stainless Steel Heat Treated Gears - Ball Bearings. Double Stage / Max 5000 RPM Input Speed. Continuous Torque 28.2 N.m (250 lb.in) / Peak Torque 56.5 N.m (500 lb.in). Min Efficiency 90% / Max. Backlash 20 min. Gearheads - Inline - Spur Gear - Size 42 Use with NEMA Size 42 Motors. Steel Housing - Aluminium Flanges - Stainless Steel Heat Treated Gears - Ball Bearings. Double Stage / Max 5000 RPM Input Speed. Continuous Torque 56 N.m (500 lb.in) / Peak Torque 113 N.m (1000 lb.in). Min Efficiency 90% / Max. Backlash 20 min. Gearheads - Inline - Spur Gear - Size 56 Use with NEMA Size 56 Motors. Steel Housing - Aluminium Flanges - Stainless Steel Heat Treated Gears - Ball Bearings. Double Stage / Max 5000 RPM Input Speed. Continuous Torque 135 N.m (1200 lb.in) / Peak Torque 270 N.m (2400 lb.in). Min Efficiency 90% / Max. Backlash 20 min. Gearheads - Ondrive Max Series Gearheads - Ondrives - MAX 13 Use with Motors - DC - Ondrives - Max series. 13mm planetary steel gearhead supplied with fitting kit to suit Size 13 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 1 Stage = 8N, 2 Stage = 12N, 3 Stage = 16N, 4 Stage = 20N, 5 Stage = 20N. Operating Temperature Range: -15°C to +100°C, Mass: 11-23g. Usable output torque depends on torque from motor. Gearheads - Ondrives - MAX 16 Use with Motors - DC - Ondrives - Max series. 16mm planetary steel gearhead supplied with fitting kit to suit Size 16 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 2 Stage = 15N, 5 Stage = 20N. Operating Temperature Range: -15°C to +65°C, Mass: 23-35g. Usable output torque depends on torque from motor. Gearheads - Ondrives - MAX 22 Use with Motors - DC - Ondrives - Max series. 22mm planetary steel gearhead supplied with fitting kit to suit Size 22 motors, sleeve bearing output. Maximum Axial Load: 100N. Maximum Radial Load at 10mm from Flange: 70N. Operating Temperature Range: -15°C to +80°C, Mass: 55-94g. Usable output torque depends on torque from motor. Gearheads - Ondrives - MAX 32 Use with Motors - DC - Ondrives - Max series. 32mm planetary steel gearhead supplied with fitting kit to suit Size 32 motors, sleeve bearing output. Maximum Axial Load: 120N. Maximum Radial Load at 12mm from Flange: 140N. Operating Temperature Range: -15°C to +80°C, Mass: 118-226g. Usable output torque depends on torque from motor. Gearheads - Ondrives - MAX 40 Use with Motors - DC - Ondrives - Max series. 38mm spur steel gearhead supplied with fitting kit to suit Size 40 motors, sleeve bearing output. Maximum Axial Load: 30N. Maximum Radial Load at 5mm from Bearing: 50N. Operating Temperature Range: -5°C to +65°C, Mass: 60-75g. Usable output torque depends on torque from motor. Gearheads - Right Angle Gearheads - Right Angle - Planetary - Size 17 Use with NEMA Size 17 Motors. Maximum input speed 5000 rpm. Shaft loading 25.4 kg (57 lbs) radial and 24.5 kg (55 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Right Angle - Planetary - Size 23 - Adapted With Nema and Non Nema Size Adaptors. Maximum input speed 5000 rpm. Shaft loading 26.8 kg (60 lbs) radial and 66.9 kg at 250rpm output (150 lbs) axial. Min. Efficiency ---- Single Stage : 95%, Double Stage : 90%, Triple Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min, Triple Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Right Angle - Planetary - Size 23 - Economy Use with NEMA Size 23 Motors. Maximum input speed 4000 rpm. Shaft loading 154.9 kg (347 lbs) radial and 153.5 kg (344 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 14 arc min, Double Stage : 18 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Right Angle - Planetary - Size 23 - Precision Use with NEMA Size 23 Motors. Maximum input speed 5000 rpm. Shaft loading 154.9 kg (347 lbs) radial and 153.5 kg (344 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 14 arc min, Double Stage : 18 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Right Angle - Planetary - Size 34 - Adapted With Nema and Non Nema Size Adaptors. Maximum input speed 5000 rpm. Shaft loading 45 kg (100 lbs) radial and 90 kg (200 lbs) axial. Min. Efficiency ---- Single Stage : 95%, Double Stage : 90%, Triple Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min, Triple Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Right Angle - Planetary - Size 42 - Adapted With Nema and Non Nema Size Adaptors. Maximum input speed 5000 rpm. Shaft loading 54 kg (120 lbs) radial and 121 kg (270 lbs) axial. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Right Angle - Planetary - Size 56 - Economy Use with NEMA Size 56 Motors. Maximum input speed 4000 rpm. Shaft loading 276 kg (620 lbs) radial and 276 kg (620 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 14 arc min, Double Stage : 18 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Right Angle - Planetary - Size 56 - Precision Use with NEMA Size 56 Motors. Maximum input speed 5000 rpm. Shaft loading 937 kg (2100 lbs) radial and 937 kg (2100 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Right Angle - Planetary - Size 60 - Adapted With Nema and Non Nema Size Adaptors. Maximum input speed 5000 rpm. Shaft loading 37.5 kg (84 lbs) radial and 179 kg (400 lbs) axial. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 9 arc min, Double Stage : 9 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Right Angle - Planetary - Size 90 - Adapted With Nema and Non Nema Size Adaptors. Maximum input speed 5000 rpm. Shaft loading 48 kg (107 lbs) radial and 470 kg (1050 lbs) axial at 250 rpm output. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 9 arc min, Double Stage : 9 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Right Angle - Planetary - Size 115 - Adapted With Nema and Non Nema Size Adaptors. Maximum input speed 5000 rpm. Shaft loading 75 kg (168 lbs) radial and 479 kg (1073 lbs) axial. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 9 arc min, Double Stage : 9 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F). Gearheads - Right Angle - Spur Gear - Size 23 Use with NEMA Size 23 Motors. Maximum input speed 5000 rpm. Shaft loading 154.9 kg (347 lbs) radial and 153.5 kg (344 lbs) axial. Min. Efficiency ---- Single Stage : 85%. Max Backlash : 25 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Right Angle - Spur Gear - Size 42 Use with NEMA Size 42 Motors. Maximum input speed 5000 rpm. Shaft loading 167 kg (375 lbs) radial and 167 kg (375 lbs) axial. Min. Efficiency ---- Single Stage : 85%. Max Backlash : 25 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearheads - Right Angle - Spur Gear - Size 56 Use with NEMA Size 56 Motors. Maximum input speed 5000 rpm. Shaft loading 276 kg (620 lbs) radial and 276 kg (620 lbs) axial. Min. Efficiency ---- Single Stage : 85%. Max Backlash : 25 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F). Gearmotors - AC Gearmotors - A.C. Single Phase - Size 60 Max Capacitance - Induction Type - 50 Hz 1.0uf / 60 Hz 0.8 uF. Max Capacitance - Hysteresis Type - 0.8uf. Unit Weight Approx 0.8 KG. Machined Aluminium Housing - Steel Shaft. Steel / Phenolic Gears - Bronze Bearings. Gearmotors - DC Gearmotors - Basic - Hobby These gearmotor kits are of simple mainly plastic design. Great for making simple toys, hobbies or concept testing. Educational series. Gearmotors - DC - Low Voltage Reversible - Low Voltage - Self Starting. Reversible. Low Voltage. Self Starting. Hosuing : Plastic / Shaft : Steel. Gearmotors - DC - Size 12 12mm Gearhead Body Diameter. Gearmotors - DC - Size 16 16mm Gearhead Body Diameter. Gearmotors - DC - Size 20 Low Cost 20mm Gearhead Body Diameter. Low cost. 70 RPM Output Speed. One model only. Reversible. Gearmotors - DC - Size 22/21 22mm Gearhead Body Diameter / 21mm Motor Body Diameter. Gearmotors - DC - Size 27 Low Cost 27mm Gearhead Body Diameter. Low cost. 36 RPM Output Speed. One model only. Reversible. Gearmotors - DC - Size 37/350 37mm Gearhead Body Diameter / 35mm Motor Body Diameter. Gearmotors - DC - Size 37/350 Low Cost 37mm Gearhead Body Diameter. Low cost. 160 RPM Output Speed. One model only. Reversible. Gearmotors - DC - Size 37/354 37mm Gearhead Body Diameter / 35.4mm Motor Body Diameter. Gearmotors - DC - Size 42/37 42mm Gearhead Body Diameter / 36.8mm Motor Body Diameter. Gearmotors - DC - Size 42/40 42mm Gearhead Body Diameter / 40mm Motor Body Diameter. Gearmotors - DC - Size 43 Light Duty 43.1mm Gearhead Body Diameter. Gearmotors - DC - Size 43/39 43mm Gearhead Body (Square) / 38.6mm Motor Body Diameter. Gearmotors - DC - Size 43/40 43mm Gearhead Body (Square) / 40mm Motor Body Diameter. Gearmotors - DC - Size 48/42 48mm Gearhead Body (Square) / 40x42mm Motor Body. Gearmotors - DC - Size 48/61 48mm Gearhead Body (Square) / 40x61mm Motor Body. Gearmotors - DC - Size 60/39 60mm Gearhead Body (Square) / 38.6mm Body Diameter. Gearmotors - DC - Size 60/40 60mm Gearhead Body (Square) / 40mm Body Diameter. Gearmotors - DC - Size 63 Ondrives Commutation: Graphite, No. of Sectors: 12. Magnets: Ferrite, Gearbox Type: Planetary, Gearbox Bushes: Rotary. Efficiency per Stage: 85%, Backlash: <=1°, Maximum Axial Load: 500N. Maximum Radial Load at 12.5mm: 350N, Operating Temperature Range: -15°C to +100°C, Mass: 1.8 to 2.6kg. Performance data is based upon an operating temperature of 25°C. Gearmotors - DC - Size 80 Ondrives Torque: 1.2Nm to 60Nm, Commutation: Graphite, No. of Sectors: 12. Magnets: Ferrite, Gearbox Type: Planetary, Gearbox Bushes: Rotary. No. of Stages: 1 - 2 - 3, Efficiency per Stage: 80% - 75% - 70%, Angular Backlash: <=0.4°. Maximum Axial Load: 1000N, Maximum Radial Load at 25mm: 600N. Operating Temperature Range: -15°C to +100°C, Mass: 4.3 to 6.3kg. Gearmotors - DC - Size 112 112mm Gearhead Body - Low Backlash. Weight: 3.50kg. Check motor data and gearbox chart for max. torque figures. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only. DUN80x80-24 DC Motor Included. Inline Gearbox TG112 series (112 x 55) included. Solarbotics Kit 10 - L293D Secret Motor Driver Want to turn a servo into a more powerful gear motor?. Educational build yourself kits. Gearmotors - DC PM Gearmotors - DC PM - Size 29 Permanent Magnet. Max. Allowable Radial Load: 40N (10mm from mounting surface). Max. Allowable Axial Load: 15N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g. Gearmotors - DC PM - Size 30 Permanent Magnet. Max. Allowable Radial Load: 60N (10mm from mounting surface). Max. Allowable Axial Load: 20N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 7 segment commutator - RFI protection standard. High quality plastic gears - Terminal dimensions 2.8 x 0.5 - Weight: 180g. Gearmotors - DC PM - Size 35 Permanent Magnet. Max. Allowable Radial Load: 60N (10mm from mounting surface). Max. Allowable Axial Load: 5N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 7 segment commutator - RFI protection standard. High quality plastic gears - Terminal dimensions 2.8 x 0.5 - Weight: 180g - Gear drive made of metal gears • Terminal dimensions 2.8 x 0.5 • Weight: 150g. Gearmotors - DC PM - Size 47 Permanent Magnet. Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g. Gearmotors - DC PM - Size 70x114 Permanent Magnet. Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g. Gearmotors - DC PM - Size 70x129 Permanent Magnet. Max. Allowable Radial Load: 100N (20mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.5mm. Allowable Temperature Range: -20°C to +60°C. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g. Gearmotors - Stepper Gearmotors - Stepper - Nema Size 17 Max Input Speed: 1000 rpm. Shaft Loading: Radial and axial = 1.78 kg. Shaft Play (Max): Radial = 0.05mm (0.002 in.), End = 0.254mm (0.010 in.). Phase Resistance: 3.3 ohms +/- 10% at 25 Deg C. 1.8 Deg Nominal Motor Step Angle. Gearmotors - Stepper - Nema Size 17 Gearmotors - Stepper - Nema Size 23 Max Input Speed: 1000 rpm. Shaft Loading: Radial and axial = 6.7 kg. Shaft Play (Max): Radial = 0.05mm (0.002 in.), End = 0.254mm (0.010 in.). Phase Resistance: 0.37 ohms +/- 10% at 25 Deg C. 1.8 Deg Nominal Motor Step Angle. Gearmotors - Stepper - Nema Size 23 Motors - Stepper - Drive Modules Motors - Stepper - Drives with Gearheads Motors - Stepper - Hybrid - Nema Size 11 Mounting hole centres 23.10 mm (+/- 0.2 mm) - Body Width 28.00 mm. Motors - Stepper - Hybrid - Nema Size 14 Mounting hole centres 26.00 mm - Body Width 35.00 mm. Motors - Stepper - Hybrid - Nema Size 17 Mounting hole centres 31.00 mm - Body Width 42.00 mm. Motors - Stepper - Hybrid - Nema Size 23 Mounting hole centres 47.00 mm - Body Width 56.40 mm. Motors - Stepper - Hybrid - Nema Size 34 Mounting hole centres 69.60 mm - Body Width 85.85 mm. Motors - Stepper - Hybrid - Nema Size 42 Mounting hole centres 88.90 mm - Flange Width 106.70 mm. Motors - Stepper - Nema Size 17 NEMA SIZE 17 - 2 PHASE STEPPER MOTOR. Motors - Stepper - Nema Size 23 NEMA SIZE 23 - 2 PHASE STEPPER MOTOR. Motors - Stepper - Nema Size 34 NEMA SIZE 34 - 2 PHASE STEPPER MOTOR. Motors - Stepper - Nema Size 42 NEMA SIZE 42 - 2 PHASE STEPPER MOTOR. Motors - Stepper - With Gearheads to Match Select motor and gearhead separately. Gears - Bevel - Metric Gears - Bevel - Module 0.50 For 90 degree angle power transfer. 20 Degree Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. Gears - Bevel - Module 0.80 For 90 degree angle power transfer. 20 Degree Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. Gears - Bevel - Module 1.00 For 90 degree angle power transfer. 20 Degree Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. Gears - Bevel - Module 1.50 For 90 degree angle power transfer. 20 Degree Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. Gears - Bevel - Module 2.00 For 90 degree angle power transfer. 20 Degree Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. Gears - Bevel - Module 2.50 For 90 degree angle power transfer. 20 Degree Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. Gears - Bevel - Module 3.00 For 90 degree angle power transfer. 20 Degree Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. Gears - Bevel - Spiral - Metric Gears - Bevel - Spiral - Module 1.50 For 90 degree angle power transfer. See Gears - Mitre for 1:1 ratios. ISO Class 6. 35 Degree Spiral Angle / 20 Degree Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces. Gears - Bevel - Spiral - Module 2.00 For 90 degree angle power transfer. See Gears - Mitre for 1:1 ratios. ISO Class 6. 35 Degree Spiral Angle / 20 Degree Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces. Gears - Bevel - Spiral - Module 2.50 For 90 degree angle power transfer. See Gears - Mitre for 1:1 ratios. ISO Class 6. 35 Degree Spiral Angle / 20 Degree Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces. Gears - Bevel - Spiral - Module 3.00 For 90 degree angle power transfer. See Gears - Mitre for 1:1 ratios. ISO Class 6. 35 Degree Spiral Angle / 20 Degree Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces. Gears - Bevel - Spiral - Module 4.00 For 90 degree angle power transfer. See Gears - Mitre for 1:1 ratios. ISO Class 6. 35 Degree Spiral Angle / 20 Degree Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces. Gears - Bevel - US Sizes Gears - Bevel - 24 Pitch For 90 degree angle power transfer. 20 Degree Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. Gears - Bevel - 32 Pitch For 90 degree angle power transfer. 20 Degree Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. Gears - Bevel - 48 Pitch For 90 degree angle power transfer. 20 Degree Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. Gears - Bevel - US Sizes - Precision Matched Sets Gears - Bevel - 48 Pitch - Precision Matched Sets Sold as sets. For 90 degree angle power transfer. Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20 Degree Pressure Angle. See Gears - Mitre for 1:1 ratios. Gears - Bevel - 64 Pitch - Precision Matched Sets Sold as sets. For 90 degree angle power transfer. Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20 Degree Pressure Angle. See Gears - Mitre for 1:1 ratios. Gears - Bevel - 72 Pitch - Precision Matched Sets Sold as sets. For 90 degree angle power transfer. Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20 Degree Pressure Angle. See Gears - Mitre for 1:1 ratios. Gears - Blanks Gears - Blanks Blanks for cutting gears and pulleys and friction drives. Gears - Cluster Gears - Cluster - 48 Pitch Have a mounting area for a second gear - see diagram. All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur …. - Hub Mounting. Gears - Cluster - 64 Pitch Have a mounting area for a second gear - see diagram. All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur …. - Hub Mounting. Gears - Cluster - 72 Pitch Have a mounting area for a second gear - see diagram. All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur …. - Hub Mounting. Gears - Cluster - 80 Pitch Have a mounting area for a second gear - see diagram. All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur …. - Hub Mounting. Gears - Cluster - Press on Gears to Suit Gears - Spur - 24 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Gears - Spur - 32 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Gears - Spur - 48 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Gears - Spur - 64 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Gears - Spur - 72 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Gears - Spur - 80 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Gears - Spur - 96 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Gears - Spur - 120 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Gears - Helical - Metric Gears - Helical - Module 1.00 Gears - Helical - Module 1.50 Gears - Helical - Module 2.00 Gears - Helical - Module 2.50 Gears - Helical - Module 3.00 Gears - Helical - US Sizes Gears - Helical - 20 Normal Pitch Gears - Helical - 24 Normal Pitch Gears - Helical - 48 Normal Pitch Gears - Hobby Hobby Gears - Bevel A small selection of Module 1 popular sizes for varied ratios. Hobby Gears - Mitre A small selection of Module 1 popular sizes for 1:1 ratios. Hobby Gears - Racks A small selection of popular sizes. Hobby Gears - Spur - Module 1 A small selection of Module 1 popular sizes (20 teeth = 20mm PCD, 40teeth = 40mm PCD). Hobby Gears - Worm and Wheel 10 : 1 Metal A small selection of popular sizes. Hobby Gears - Worm and Wheel 20 : 1 Plastic A small selection of popular sizes. Hobby Gears - Worm and Wheel 25 : 1 Plastic A small selection of popular sizes. Hobby Gears - Worm and Wheel 30 : 1 Plastic A small selection of popular sizes. Hobby Gears - Worm and Wheel 40 : 1 Metal A small selection of popular sizes. Hobby Gears - Worm and Wheel 40 : 1 Plastic Popular Hobby Set Hobby Gears - Worm and Wheel 45 : 1 Metal A small selection of popular sizes. Hobby Gears - Worm and Wheel 50 : 1 Plastic A small selection of popular sizes. Hobby Gears - Worm and Wheel 360 : 1 Metal A small selection of popular sizes. Gears - Internal - Metric Sizes Gears - Internal - Module 0.50 2024-T4 Aluminum and 303 stainless steel. Gears - Internal - Module 0.80 2024-T4 Aluminum and 303 stainless steel. Gears - Internal - Module 1.00 2024-T4 Aluminum and 303 stainless steel. Gears - Internal - US Sizes Gears - Internal - 24 Pitch Various materials including 2024-T4 Aluminum, 303 stainless steel and brass. Gears - Internal - 32 Pitch Various materials including 2024-T4 Aluminum, 303 stainless steel and brass. Gears - Internal - 48 Pitch 2024-T4 Aluminum and 303 stainless steel. Gears - Internal - 64 Pitch 2024-T4 Aluminum and 303 stainless steel. Gears - Internal - 72 Pitch 2024-T4 Aluminum and 303 stainless steel. Gears - Internal - 96 Pitch 2024-T4 Aluminum and 303 stainless steel. Gears - Mitre Gears - Bevel - 24 Pitch For 90 degree angle power transfer. Gears - Bevel - 32 Pitch For 90 degree angle power transfer. Gears - Bevel - 48 Pitch For 90 degree angle power transfer. Gears - Bevel - 48 Pitch - Precision Matched Sets Sold as sets. For 90 degree angle power transfer. Gears - Bevel - 64 Pitch - Precision Matched Sets Sold as sets. For 90 degree angle power transfer. Gears - Bevel - 72 Pitch - Precision Matched Sets Sold as sets. For 90 degree angle power transfer. Gears - Bevel - Module 0.50 For 90 degree angle power transfer. Gears - Bevel - Module 0.80 For 90 degree angle power transfer. Gears - Bevel - Module 1.00 For 90 degree angle power transfer. Gears - Bevel - Module 1.50 For 90 degree angle power transfer. Gears - Bevel - Module 2.00 For 90 degree angle power transfer. Gears - Bevel - Module 2.50 For 90 degree angle power transfer. Gears - Bevel - Module 3.00 For 90 degree angle power transfer. Gears - Bevel - Spiral - Module 1.50 For 90 degree angle power transfer. Gears - Bevel - Spiral - Module 2.00 For 90 degree angle power transfer. Gears - Bevel - Spiral - Module 2.50 For 90 degree angle power transfer. Gears - Bevel - Spiral - Module 3.00 For 90 degree angle power transfer. Gears - Bevel - Spiral - Module 4.00 For 90 degree angle power transfer. Gears - Mitre - Metric Sizes Gears - Mitre - Module 0.50 1:1 Ratio. 20 Degree Pressure Angle - Brass and acetal. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Module 0.60 1:1 Ratio. 20 Degree Pressure Angle - Stainless steel, brass, aluminium and acetal. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Module 0.80 1:1 Ratio. 20 Degree Pressure Angle - Acetal and brass. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Module 1.00 1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Module 1.50 1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Module 2.00 1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Module 2.50 1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Module 2.75 1:1 Ratio. 20 Degree Pressure Angle - Steel. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Module 3.00 1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Module 3.50 1:1 Ratio. 20 Degree Pressure Angle - Zinc die cast and steel. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Spiral - Metric Sizes Gears - Mitre - Spiral - Module 1.00 1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel. A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Spiral - Module 1.25 1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel. A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Spiral - Module 1.50 1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel. A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Spiral - Module 2.00 1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel. A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Spiral - Module 2.25 1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel. A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Spiral - Module 2.50 1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel. A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Spiral - Module 3.00 1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel. A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Spiral - Module 3.50 1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel. A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Spiral - Module 4.00 1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel. A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - Spiral - Module 5.00 1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel. A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - US Sizes Gears - Mitre - 16 Pitch 1:1 Ratio. 20 Degree Pressure Angle - Nylon. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - 20 Pitch 1:1 Ratio. 20 Degree Pressure Angle - Unhardened Steel. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - 24 Pitch 1:1 Ratio. 20 Degree Pressure Angle - Nylon, brass and carbon steel. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - 32 Pitch 1:1 Ratio. 20 Degree Pressure Angle - Nylon, brass and carbon steel. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - 48 Pitch 1:1 Ratio. 20 Degree Pressure Angle - Nylon, brass, carbon steel and acetal. Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios. Gears - Mitre - US Sizes - Precision Matched Sets Gears - Mitre - 48 Pitch - Precision Matched Sets Sold as sets - 1:1 Ratio. Stainless steel and aluminium. Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20 Degree Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90 degree angle. Gears - Mitre - 64 Pitch - Precision Matched Sets Sold as sets - 1:1 Ratio. Stainless steel and aluminium. Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20 Degree Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90 degree angle. Gears - Mitre - 72 Pitch - Precision Matched Sets Sold as sets - 1:1 Ratio. Stainless steel and aluminium. Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20 Degree Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90 degree angle. Gears - Pinion Gears - Pinion Wire - 24 Pitch Brass and carbon steel. Gears - Pinion Wire - 32 Pitch Brass and carbon steel. Gears - Pinion Wire - 44 Pitch Brass and carbon steel. Gears - Pinion Wire - 48 Pitch Brass and carbon steel. Gears - Pinion Wire - 64 Pitch Brass and carbon steel. Gears - Pinion Wire - Module 0.40 Brass. Gears - Pinion Wire - Module 0.50 Brass. Gears - Pinion Wire - Module 0.80 Brass. Gears - Spur - 16 Pitch - 14.5 Degree PCD = No. of Teeth x 1.588mm (1/16 in.). 14.5 Degree Pressure Angle. Nylon. Gears - Spur - 16 Pitch - 20.0 Degree PCD = No. of Teeth x 1.588mm (1/16 in.). 20 Degree Pressure Angle. Nylon and acetal. Gears - Spur - 24 Pitch - 14.5 Degree PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5 Degree Pressure Angle. Nylon, brass and carbon steel. Gears - Spur - 24 Pitch - 20.0 Degree PCD = No. of Teeth x 1.058mm (1/24 in.). 20 Degree Pressure Angle. 2024 aluminium, brass, acetal, 303 stainless steel, nylon, bakelite and alloy steel. Gears - Spur - 32 Pitch - 14.5 Degree PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5 Degree Pressure Angle. 5052 aluminium, brass, carbon steel and nylon. Gears - Spur - 32 Pitch - 20.0 Degree PCD = No. of Teeth x 0.794mm (1/32 in.). 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, acetal, bakelite, brass, carbon steel and nylon. Gears - Spur - 48 Pitch - 14.5 Degree PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5 Degree Pressure Angle. 5052 aluminium, brass, carbon steel and nylon. Gears - Spur - 48 Pitch - 20.0 Degree PCD = No. of Teeth x 0.529mm (1/48 in.). 20 Degree Pressure Angle. 2024 and 5052 aluminium, 303 stainless steel, acetal, brass and nylon. Gears - Spur - 64 Pitch PCD = No. of Teeth x 0.397mm (1/64 in.). 20 Degree Pressure Angle. 5052 aluminium, stainless steel, acetal and brass. Gears - Spur - 72 Pitch PCD = No. of Teeth x 0.353mm (1/72 in.). 20 Degree Pressure Angle. 2024 aluminium, stainless steel and acetal. Gears - Spur - 80 Pitch PCD = No. of Teeth x 0.318mm (1/80 in.). 20 Degree Pressure Angle. 2024 aluminium and 303 stainless steel. Gears - Spur - 96 Pitch PCD = No. of Teeth x 0.265mm (1/96 in.). 20 Degree Pressure Angle. 2024 aluminium and 303 stainless steel. Gears - Spur - 120 Pitch PCD = No. of Teeth x 0.212mm (1/120 in.). 20 Degree Pressure Angle. 2024 aluminium and 303 stainless steel. Gears - Spur - Module 0.15 PCD = No. of Teeth x 0.150mm. 20 Degree Pressure Angle. Brass. Gears - Spur - Module 0.20 PCD = No. of Teeth x 0.200mm. 20 Degree Pressure Angle. Brass. Gears - Spur - Module 0.25 PCD = No. of Teeth x 0.250mm. 20 Degree Pressure Angle. Brass and carbon steel. Gears - Spur - Module 0.30 PCD = No. of Teeth x 0.300mm. 20 Degree Pressure Angle. Brass. Gears - Spur - Module 0.40 PCD = No. of Teeth x 0.400mm. 20 Degree Pressure Angle. 416 stainless steel, acetal, brass and carbon steel. Gears - Spur - Module 0.50 PCD = No. of Teeth x 0.500mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel. Gears - Spur - Module 0.60 PCD = No. of Teeth x 0.600mm. 20 Degree Pressure Angle. Carbon steel. Gears - Spur - Module 0.70 PCD = No. of Teeth x 0.700mm. 20 Degree Pressure Angle. Acetal. Gears - Spur - Module 0.75 PCD = No. of Teeth x 0.750mm. 20 Degree Pressure Angle. Brass. Gears - Spur - Module 0.80 PCD = No. of Teeth x 0.800mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel. Gears - Spur - Module 1.00 PCD = No. of Teeth x 1.000mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel. Gears - Spur - Module 1.25 PCD = No. of Teeth x 1.250mm. 20 Degree Pressure Angle. 303 stainless steel and acetal. Gears - Spur - Module 1.50 PCD = No. of Teeth x 1.500mm. 20 Degree Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. Gears - Spur - Module 2.00 PCD = No. of Teeth x 2.000mm. 20 Degree Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. Gears - Spur - Module 2.50 PCD = No. of Teeth x 2.500mm. 20 Degree Pressure Angle. 303 stainless steel, carbon steel and nylon. Gears - Spur - Module 3.00 PCD = No. of Teeth x 3.000mm. 20 Degree Pressure Angle. 303 stainless steel, carbon steel and nylon. Shafts - Pinion Gears - Pinion Wire - Metric Sizes Gears - Pinion Wire - Module 0.40 Brass. Metallic. Gears - Pinion Wire - Module 0.50 Brass. Metallic. Gears - Pinion Wire - Module 0.80 Brass. Metallic. Gears - Pinion Wire - US Sizes Gears - Pinion Wire - 24 Pitch Brass and carbon steel. Metallic. Gears - Pinion Wire - 32 Pitch Brass and carbon steel. Metallic. Gears - Pinion Wire - 44 Pitch Brass and carbon steel. Metallic. Gears - Pinion Wire - 48 Pitch Brass and carbon steel. Metallic. Gears - Pinion Wire - 64 Pitch Brass and carbon steel. Metallic. Gears - Racks - Flexible Gears - Racks - Flexible Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm. 20 Degree Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order. Gears - Racks - Flexible - Clamps For clamping acetal flexirack. Gears - Racks - Flexible - Guide Rails For mounting flexirack. Flexible nylon or rigid aluminium guide rails. Longer lengths in Nylon available on special order. Gears - Racks - Joining Gauges Gauges - Joining - Rack Gauges to determine correct alignment of ground racks. Gears - Racks - Metric Sizes Gears - Racks - Circular Pitch 2 20 Degree Pressure Angle. Hardened steel. Gears - Racks - Circular Pitch 5 20 Degree Pressure Angle. Hardened steel. Gears - Racks - Module 0.30 20 Degree Pressure Angle. Brass. Metallic. Gears - Racks - Module 0.40 20 Degree Pressure Angle. Brass, carbon steel and nylon. Plastic and metallic. Gears - Racks - Module 0.50 20 Degree Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon. Plastic and metallic. Gears - Racks - Module 0.70 20 Degree Pressure Angle. Acetal. Plastic. Gears - Racks - Module 0.75 20 Degree Pressure Angle. Brass and stainless steel. Metallic. Gears - Racks - Module 0.80 20 Degree Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon. Plastic and metallic. Gears - Racks - Module 1.00 20 Degree Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon. Plastic and metallic. Gears - Racks - Module 1.25 20 Degree Pressure Angle. Acetal. Plastic. Gears - Racks - Module 1.50 20 Degree Pressure Angle. Carbon steel, stainless steel, acetal and nylon. Plastic and metallic. Gears - Racks - Module 2.00 20 Degree Pressure Angle. Carbon steel, acetal and nylon. Plastic and metallic. Gears - Racks - Module 2.50 20 Degree Pressure Angle. Carbon steel, acetal and nylon. Plastic and metallic. Gears - Racks - Module 3.00 20 Degree Pressure Angle. Carbon steel, acetal and nylon. Plastic and metallic. Gears - Racks - US Sizes - 14.5 Degree Pressure Angle Gears - Racks - 16 Pitch - 14.5 Degree 14.5 Degree Pressure Angle. Nylon. Plastic. Gears - Racks - 24 Pitch - 14.5 Degree 14.5 Degree Pressure Angle. Brass, carbon steel and nylon. Plastic and metallic. Gears - Racks - 32 Pitch - 14.5 Degree 14.5 Degree Pressure Angle. Brass, carbon steel and nylon. Plastic and metallic. Gears - Racks - 48 Pitch - 14.5 Degree 14.5 Degree Pressure Angle. Brass, carbon steel and nylon. Plastic and metallic. Gears - Racks - US Sizes - 20 Degree Pressure Angle Gears - Racks - 1/10 Pitch 20 Degree Pressure Angle. 416 Stainless Steel. Metallic. Gears - Racks - 1/20 Pitch 20 Degree Pressure Angle. 416 Stainless Steel. Metallic. Gears - Racks - 16 Pitch - 20.0 Degree 20 Degree Pressure Angle. 416 Stainless Steel. Metallic. Gears - Racks - 20 Pitch 20 Degree Pressure Angle. 416 Stainless Steel. Metallic. Gears - Racks - 24 Pitch - 20.0 Degree 20 Degree Pressure Angle. 416 stainless steel and aluminium. Metallic. Gears - Racks - 32 Pitch - 20.0 Degree 20 Degree Pressure Angle. 416 stainless steel and aluminium. Metallic. Gears - Racks - 48 Pitch - 20.0 Degree 20 Degree Pressure Angle. 416 stainless steel and aluminium. Metallic. Gears - Racks - 64 Pitch 20 Degree Pressure Angle. 416 stainless steel and aluminium. Metallic. Gears - Racks - 72 Pitch 20 Degree Pressure Angle. 416 stainless steel and aluminium. Metallic. Gears - Racks - 80 Pitch 20 Degree Pressure Angle. 416 stainless steel and aluminium. Metallic. Gears - Racks - 96 Pitch 20 Degree Pressure Angle. 416 stainless steel and aluminium. Metallic. Gears - Racks - 120 Pitch 20 Degree Pressure Angle. 416 stainless steel and aluminium. Metallic. Gears - Spur - Antibacklash - Metric Sizes Gears - Spur - Antibacklash - Module 0.50 Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Antibacklash - Module 0.80 Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Antibacklash - Module 1.00 Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Antibacklash - US Sizes Gears - Spur - Antibacklash - 24 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Antibacklash - 32 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Antibacklash - 48 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Antibacklash - 64 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Antibacklash - 72 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Antibacklash - 80 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Antibacklash - 96 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Antibacklash - 120 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Circular Pitch Gears - Spur - Circular Pitch 2 PCD = No. of Teeth x 0.636mm (2.000 / Pi.). Various styles and materials. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Circular Pitch 5 PCD = No. of Teeth x 1.591mm (5.000 / Pi.). Various styles and materials. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Cluster Gears - Cluster - 48 Pitch Have a mounting area for a second gear - see diagram. Gears - Cluster - 64 Pitch Have a mounting area for a second gear - see diagram. Gears - Cluster - 72 Pitch Have a mounting area for a second gear - see diagram. Gears - Spur - Differential End Gears - Spur - 48 Pitch - Differential End To suit the precision diffs listed on this site. 2024 aluminium and 303 stainless steel. Metallic. Gears - Spur - 64 Pitch - Differential End To suit the precision diffs listed on this site. 2024 aluminium and 303 stainless steel. Metallic. Gears - Spur - 72 Pitch - Differential End To suit the precision diffs listed on this site. 2024 aluminium and 303 stainless steel. Metallic. Gears - Spur - 96 Pitch - Differential End To suit the precision diffs listed on this site. 2024 aluminium and 303 stainless steel. Metallic. Gears - Spur - Hub Mounting Gears - Spur - 24 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Plastic and metallic. Gears - Spur - 32 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Plastic and metallic. Gears - Spur - 48 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Plastic and metallic. Gears - Spur - 64 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Plastic and metallic. Gears - Spur - 72 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Plastic and metallic. Gears - Spur - 80 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Plastic and metallic. Gears - Spur - 96 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Plastic and metallic. Gears - Spur - 120 Pitch - Hub Mounting Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal. Plastic and metallic. Gears - Spur - Metric Sizes Gears - Spur - Module 0.15 PCD = No. of Teeth x 0.150mm. 20 Degree Pressure Angle. Brass. Metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 0.20 PCD = No. of Teeth x 0.200mm. 20 Degree Pressure Angle. Brass. Metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 0.25 PCD = No. of Teeth x 0.250mm. 20 Degree Pressure Angle. Brass and carbon steel. Metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 0.30 PCD = No. of Teeth x 0.300mm. 20 Degree Pressure Angle. Brass. Metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 0.40 PCD = No. of Teeth x 0.400mm. 20 Degree Pressure Angle. 416 stainless steel, acetal, brass and carbon steel. Metallic and plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 0.50 PCD = No. of Teeth x 0.500mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel. Metallic and plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 0.60 PCD = No. of Teeth x 0.600mm. 20 Degree Pressure Angle. Carbon steel. Metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 0.70 PCD = No. of Teeth x 0.700mm. 20 Degree Pressure Angle. Acetal. Metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 0.75 PCD = No. of Teeth x 0.750mm. 20 Degree Pressure Angle. Brass. Metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 0.80 PCD = No. of Teeth x 0.800mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel. Metallic and plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 1.00 PCD = No. of Teeth x 1.000mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel. Metallic and plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 1.25 PCD = No. of Teeth x 1.250mm. 20 Degree Pressure Angle. 303 stainless steel and acetal. Metallic and plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 1.50 PCD = No. of Teeth x 1.500mm. 20 Degree Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. Metallic and plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 2.00 PCD = No. of Teeth x 2.000mm. 20 Degree Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. Metallic and plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 2.50 PCD = No. of Teeth x 2.500mm. 20 Degree Pressure Angle. 303 stainless steel, carbon steel and nylon. Metallic and plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Module 3.00 PCD = No. of Teeth x 3.000mm. 20 Degree Pressure Angle. 303 stainless steel, carbon steel and nylon. Metallic and plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - Minilash Gears - Spur - Minilash - 64 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Minilash - 72 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Minilash - 80 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Minilash - 96 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Minilash - 120 Pitch Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle. Gears - Spur - Slip Clutch Flange Mounting Gears - Spur - 48 Pitch - Slip Clutch Flange Mounting For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel. Metallic. Gears - Spur - 64 Pitch - Slip Clutch Flange Mounting For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel. Metallic. Gears - Spur - 72 Pitch - Slip Clutch Flange Mounting For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel. Metallic. Gears - Spur - 96 Pitch - Slip Clutch Flange Mounting For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel. Metallic. Gears - Spur - 120 Pitch - Slip Clutch Flange Mounting For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel. Metallic. Gears - Spur - Stem - Metric Sizes Gears - Spur - Module 0.50 - Stem Gears with integral shafts. Metallic. Gears - Spur - Module 0.75 - Stem Gears with integral shafts. Metallic. Gears - Spur - Module 0.80 - Stem Gears with integral shafts. Metallic. Gears - Spur - Module 1.00 - Stem Gears with integral shafts. Metallic. Gears - Spur - Module 1.50 - Stem Gears with integral shafts. Metallic. Gears - Spur - Module 2.00 - Stem Gears with integral shafts. Metallic. Gears - Spur - Module 2.50 - Stem Gears with integral shafts. Metallic. Gears - Spur - Module 3.00 - Stem Gears with integral shafts. Metallic. Gears - Spur - Stem - US Sizes Gears - Spur - 24 Pitch - Stem 303 stainless steel. Metallic. Gears - Spur - 32 Pitch - Stem 303 stainless steel. Metallic. Gears - Spur - 48 Pitch - Stem 303 stainless steel. Metallic. Gears - Spur - 64 Pitch - Stem 303 stainless steel. Metallic. Gears - Spur - 72 Pitch - Stem 303 stainless steel. Metallic. Gears - Spur - 80 Pitch - Stem 303 stainless steel. Metallic. Gears - Spur - 96 Pitch - Stem 303 stainless steel. Metallic. Gears - Spur - 120 Pitch - Stem 303 stainless steel. Metallic. Gears - Spur - Stock - Metric Sizes Gears - Spur - Stock - Module 0.40 Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - Module 0.50 Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - Module 0.80 Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - Module 1.00 Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - Pinion Wire Gears - Pinion Wire - 24 Pitch Brass and carbon steel. Gears - Pinion Wire - 32 Pitch Brass and carbon steel. Gears - Pinion Wire - 44 Pitch Brass and carbon steel. Gears - Pinion Wire - 48 Pitch Brass and carbon steel. Gears - Pinion Wire - 64 Pitch Brass and carbon steel. Gears - Pinion Wire - Module 0.40 Brass. Gears - Pinion Wire - Module 0.50 Brass. Gears - Pinion Wire - Module 0.80 Brass. Gears - Spur - Stock - US Sizes Gears - Spur - Stock - 20 Pitch Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - 24 Pitch Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - 32 Pitch Lengths of spur gear stock for manufacturing gears. Gears - Spur - Stock - 48 Pitch Lengths of spur gear stock for manufacturing gears. Gears - Spur - US Sizes - 14.5 Degree Gears - Spur - 16 Pitch - 14.5 Degree PCD = No. of Teeth x 1.588mm (1/16 in.). 14.5 Degree Pressure Angle. Nylon. Plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 24 Pitch - 14.5 Degree PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5 Degree Pressure Angle. Nylon, brass and carbon steel. Plastic and metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 32 Pitch - 14.5 Degree PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5 Degree Pressure Angle. 5052 aluminium, brass, carbon steel and nylon. Plastic and metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 48 Pitch - 14.5 Degree PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5 Degree Pressure Angle. 5052 aluminium, brass, carbon steel and nylon. Plastic and metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - US Sizes - 20 Degree Gears - Spur - 16 Pitch - 20.0 Degree PCD = No. of Teeth x 1.588mm (1/16 in.). 20 Degree Pressure Angle. Nylon and acetal. Plastic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 24 Pitch - 20.0 Degree PCD = No. of Teeth x 1.058mm (1/24 in.). 20 Degree Pressure Angle. 2024 aluminium, brass, acetal, 303 stainless steel, nylon, bakelite and alloy steel. Plastic and metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 32 Pitch - 20.0 Degree PCD = No. of Teeth x 0.794mm (1/32 in.). 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, acetal, bakelite, brass, carbon steel and nylon. Plastic and metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 48 Pitch - 20.0 Degree PCD = No. of Teeth x 0.529mm (1/48 in.). 20 Degree Pressure Angle. 2024 and 5052 aluminium, 303 stainless steel, acetal, brass and nylon. Plastic and metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 64 Pitch PCD = No. of Teeth x 0.397mm (1/64 in.). 20 Degree Pressure Angle. 5052 aluminium, stainless steel, acetal and brass. Plastic and metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 72 Pitch PCD = No. of Teeth x 0.353mm (1/72 in.). 20 Degree Pressure Angle. 2024 aluminium, stainless steel and acetal. Plastic and metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 80 Pitch PCD = No. of Teeth x 0.318mm (1/80 in.). 20 Degree Pressure Angle. 2024 aluminium and 303 stainless steel. Metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 96 Pitch PCD = No. of Teeth x 0.265mm (1/96 in.). 20 Degree Pressure Angle. 2024 aluminium and 303 stainless steel. Metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Spur - 120 Pitch PCD = No. of Teeth x 0.212mm (1/120 in.). 20 Degree Pressure Angle. 2024 aluminium and 303 stainless steel. Metallic. Fairloc Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. Gears - Stem Gears - Spur - 24 Pitch - Stem 303 stainless steel. Gears - Spur - 32 Pitch - Stem 303 stainless steel. Gears - Spur - 48 Pitch - Stem 303 stainless steel. Gears - Spur - 64 Pitch - Stem 303 stainless steel. Gears - Spur - 72 Pitch - Stem 303 stainless steel. Gears - Spur - 80 Pitch - Stem 303 stainless steel. Gears - Spur - 96 Pitch - Stem 303 stainless steel. Gears - Spur - Module 0.50 - Stem Gears with integral shafts. Gears - Spur - Module 0.75 - Stem Gears with integral shafts. Gears - Spur - Module 0.80 - Stem Gears with integral shafts. Gears - Spur - Module 1.00 - Stem Gears with integral shafts. Gears - Spur - Module 1.50 - Stem Gears with integral shafts. Gears - Spur - Module 2.00 - Stem Gears with integral shafts. Gears - Spur - Module 2.50 - Stem Gears with integral shafts. Gears - Spur - Module 3.00 - Stem Gears with integral shafts. Gears - Worm - Metallic - Antibacklash Worms and Worm Gears - 24 Pitch (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 24 Pitch (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 24 Pitch (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 32 Pitch (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 32 Pitch (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 32 Pitch (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 48 Pitch (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 48 Pitch (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 48 Pitch (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 48 Pitch (Series 4) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 48 Pitch (Series 5) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 64 Pitch (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 64 Pitch (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 64 Pitch (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 0.50 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 0.50 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 0.80 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 0.80 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.00 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.00 (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.50 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.50 (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 4) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 5) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.50 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.50 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 3.00 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 3.00 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 3.00 (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Gears - Worm - Metallic - Metric Worms and Worm Gears - Module 0.50 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 0.50 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 0.80 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 0.80 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.00 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.00 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.00 (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.50 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.50 (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 4) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 5) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.50 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.50 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 3.00 (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 3.00 (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 3.00 (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Gears - Worm - Metallic - US Sizes Worms and Worm Gears - 24 Pitch (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 24 Pitch (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 24 Pitch (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 32 Pitch (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 32 Pitch (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 32 Pitch (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 48 Pitch (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 48 Pitch (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 48 Pitch (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 48 Pitch (Series 4) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 48 Pitch (Series 5) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 64 Pitch (Series 1) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 64 Pitch (Series 2) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 64 Pitch (Series 3) - Metallic Worms and Gears must be chosen from the same pitch and series to match. Gears - Worm - Plastic - Metric Worms and Worm Gears - Module 0.80 (Series 2) - Plastic Match with metallic worms Module 0.80 Series 2. Worms and Worm Gears - Module 1.00 (Series 1) - Plastic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.00 (Series 3) - Plastic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.50 (Series 1) - Plastic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 1.50 (Series 3) - Plastic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 1) - Plastic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.00 (Series 2) - Plastic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.50 (Series 1) - Plastic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - Module 2.50 (Series 2) - Plastic Worms and Gears must be chosen from the same pitch and series to match. Gears - Worm - Plastic - US Sizes Worms and Worm Gears - 24 Pitch (Series 1) - Plastic Worms and Gears must be chosen from the same pitch and series to match. Worms and Worm Gears - 24 Pitch (Series 2) - Plastic Worms and Gears must be chosen from the same pitch and series to match.