Catalogue Index - Categories beginning with G
|
Gamborini  |
Gamborini
Dental Handpiece Parts by Model
Where alternative bearing options are offered, we make no claims as to the suitability of the alternatives. Selection of the most suitable bearing is the responsibility of the customer. It is usually best to replace a bearing with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
Gas Springs - Adjustable |
Gas Springs - Adjustable - 50-540N
Body: Semi Matt Black Epoxy Paint. Finish: Black. Adjusted by Grubscrew. Once discharged, the gas is not refillable. Supplied filled to maximum force.
|
Gas Springs - Adjustable - Accessories
See diagrams in main Gas Springs Categories.
|
Gas Springs - Adjustable - Push Type - Max 100N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 5mm. Available Force Range: 5N to 100N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 180N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 180N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 400N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 400N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 700N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 50N to 700N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 1300N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 80N to 1300N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 2600N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 100N to 2600N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 5000N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 500N to 5000N (comes standard with max. force).
|
Gasket Cement |
Adhesives and Sealants - General
Molytec, Loctite, Pacer, Dow Corning, 3M. Includes silicone sealant, gasket adhesive, canopy glue, belt conditioner and electronic tak-pak.
|
Gauges - Joining |
Gauges - Joining - Rack
Gauges to determine correct alignment of ground racks.
20 Degree Pressure Angle.
|
Gauges - Tension |
Belt Tension Tester
For testing the tension on assembled timing belts, vee belts, flat belts etc.
|
Gaui |
Gaui
Model Helicopter Bearings
Where alternative bearing options are offered, we make no claims as to the suitability of the alternatives. Selection of the most suitable bearing is the responsibility of the customer. It is usually best to replace a bearing with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
Gear and Dial Hubs |
Hubs - Gear and Dial - Removable Type
|
Hubs - Gear and Dial - Single
|
Gear Blanks |
Gears - Blanks
Blanks for cutting gears and pulleys and friction drives.
|
Gear Clamps |
Clamps - Gear - Screw Type
Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.
|
Clamps - Gear - Split
Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.
|
Clamps - Gear - Two Piece - Commercial Balanced
Commercial - Stainless - Aluminium - Carbon Steel - For our clamp type gears.
|
Clamps - Gear - Two Piece - Precision Balanced
Precision - Stainless - Aluminium - Carbon Steel - For our clamp type gears.
|
Gear Hubs |
Hubs - Gear and Dial - Double
|
Hubs - Gear and Dial - Removable Type
|
Hubs - Gear and Dial - Single
|
Gear Pullers |
Tools - Pullers - Small
Small pullers for miniature bearings, gears, pulleys, sprockets and other pressed on parts.
|
Gear Sets - Hobby |
Assortments - Various
Springs - O-Rings - Shafting - Circlips - Gears.
|
Gear Stock - Spur |
Gears - Pinion Wire - 24 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 32 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 44 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 48 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 64 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - Module 0.40
Brass.
|
Gears - Pinion Wire - Module 0.50
Brass.
|
Gears - Pinion Wire - Module 0.80
Brass.
|
Gears - Spur - Stock - 20 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - 24 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - 32 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - 48 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 0.40
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 0.50
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 0.80
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 1.00
Lengths of spur gear stock for manufacturing gears.
|
Gear Type Couplings |
Couplings - Crowned Tooth Gear Type
Steel hubs with Moulded Nylon Sleeve.
|
Couplings - Geargrip
|
Gearboxes - Basic |
Gearboxes - Light Duty - Base Mount
Approx weight 115 grams. Discontinued group. Minimum quantities will apply to manufacture.
Helical Gears. Brass Bearings. Backlash: 3 Deg Nominal - Max 8 Deg including endplay. Aluminium Alloy housing and base. Plated steel shafts.
|
Gearboxes - Light Duty - Panel Mount
Approx weight 115 grams. SRLP Series.
Helical Gears. Brass Bearings. Backlash: 3 Deg Nominal - Max 8 Deg including endplay. Aluminium Alloy housing. Plated steel shafts.
|
Gearboxes - Bu-Ord |
Gearboxes - Bu-Ord - Size 11 - Double End
SRBO11 Series.
Items listed as Zero Backlash are for loads less than the ZB Torque Limit shown.
|
Gearboxes - Bu-Ord - Size 15 - Double End
SRBO15 Series.
|
Gearboxes - Bu-Ord - Size 15 - Single End
SRBO15 Series.
|
Gearboxes - Bu-Ord - Size 18 - Double End
SRBO18 Series.
|
Gearboxes - Bu-Ord - Size 18 - Single End
SRBO18 Series.
|
Gearboxes - Cross Axis |
Gearboxes - Cross Axis - 18.8 x 13.5 x 12.0mm
PREM6 Series.
Gearbox Case: Aluminium 6082 T6. Gears: Steel 817M40T condition.
|
Gearboxes - Cross Axis - 38.9 x 31.8 x 19.1
Worm Gears - Precision.
Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F).
|
Gearboxes - Cross Axis - 47.0 x 40.0 x 22.0mm
Worm and Wormwheel box. 1.4 to 2.5Nm. 5:1 to 120:1 ratios. P20 and PF20.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 52 x 34 x 34
Helical or Wormwheel Gears. 6mm Bores. E20 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 52.4 x 44.5 x 25.4
Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.
Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F).
|
Gearboxes - Cross Axis - 70.0 x 60.0 x 28.0mm
Worm and Wormwheel box. 2.5 to 8.8Nm. 5:1 to 120:1 ratios. P30 and PF30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 77.8 x 63.5 x 34.9
Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.
Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F).
|
Gearboxes - Cross Axis - 78 x 48 x 48
Helical or Wormwheel Gears. 10mm Bores. E30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 83.3 x 76.2 x 44.5
Worm Gear - 64DP Precision.
Max input speed 1000 RPM. Right or left hand. Can only be driven from input shaft. Maximum Backlash 30 minutes. Permanently Lubricated.
|
Gearboxes - Cross Axis - 85.6 x 66.7 x 34.9
Worm Gears - Commercial size 26.
Maximum input speed 1800 RPM. Approx weight 0.6 KG (20 oz).
|
Gearboxes - Cross Axis - 90.0 x 75.0 x 32.0mm
Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 104 x 63 x 63
Helical or Wormwheel Gears. 15mm Bores. E40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 110.0 x 95.0 x 38.0mm
Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 130 x 80 x 80
Helical or Wormwheel Gears. 20mm Bores. E50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 130.0 x 110.0 x 46.0mm
Worm and Wormwheel box. 13.4 to 57.0Nm. 5:1 to 120:1 ratios. P55 and PF55 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 136.5 x 111.1 x 63.5
Worm gears.
Maximum input speed 1800 RPM. Approx weight 2.7 KG (6 lb).
|
Gearboxes - Cross Axis - 150 x 96 x 96 A
Helical or Wormwheel Gears. 25mm Bores. E60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 150 x 96 x 96 B
Helical or Wormwheel Gears. 30mm Bores. E60B Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).
|
Gearboxes - Cross Axis - 150.0 x 125.0 x 54.0mm
Worm and Wormwheel box. 30.0 to 118.0Nm. 5:1 to 120:1 ratios. P60 and PF60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 170.0 x 145.0 x 60.0mm
Worm and Wormwheel box. 38.0 to 164.0Nm. 5:1 to 120:1 ratios. P70 and PF70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Inline |
Gearboxes - Basic Inline and Offset
SRBI and SRBO Series.
Steel Shafts. Steel Gears. Bronze Bearings. Max Backlash 2 Degree at output. Weight 20mm = 20gram / 27mm = 40gram / 42mm = 65gram.
|
Gearboxes - Inline - 27 x 45mm
J27 Series. Miniature gearbox.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 60g. Backlash: Depends on ratio. Hours Life: 12000 hr. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 50 x 30mm
J51 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: J51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 50 x 40mm
J52 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 50 x 40mm Hi Torque
JHD51 Series.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: JHD51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 50 x 50mm
J53 Series.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 60 x 56mm
NT61 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 60 x 70mm
NT62 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 60 x 84mm
NT63 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 63 x 40mm
J64 Series.
End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 63 x 50mm
J65 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 63 x 60mm
J66 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 90 x 74mm
NT91 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 90 x 94mm
NT92 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 112.0 x 52.0 Low Backlash
Taper Gears - Weight: 1.50kg. TG112 Series.
Case: Anodised Aluminum 6082. Taper Gears: 817M40T High Carbon Steel. Weight: 1.50kg. Output Backlash: <= 8 arc/min at output. Max Input Speed: 3000 Rpm.
|
Gearboxes - Inline - 114 x 90mm
NT121 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 120 x 103mm
NTB121 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 1.63/3.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 120 x 120mm
NT122 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 120 x 160mm
NTB122 Series.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 4/5kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - Epicyclic |
Gearboxes - Inline - Epicyclic - 57.0 x 45.0 x 45.0mm
Servo Gearbox 3.4Nm to 7Nm ratios 3:1 - 6:1. EHD04 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 0.44kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Inline - Epicyclic - 78.0 x 60.0 x 60.0mm
Servo Gearbox 8Nm to 19Nm ratios 3:1 - 6:1. EHD06 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 0.96kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Inline - Epicyclic - 80.0 x 75.0 x 75.0mm
Servo Gearbox 20Nm to 50Nm ratios 3:1 - 6:1. EHD08 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 1.4kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Inline - Epicyclic - 115.0 x 75.0 x 75.0mm
Servo Gearbox 35Nm to 50Nm ratios 9:1 - 36:1. EHD08 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 2.1kg Backlash: 1°30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Inline - Epicyclic - 134.0 x 108.0mm
Servo Gearbox 60Nm to 140Nm ratios 3:1 - 6:1. EHD12 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Backlash: 30'. Max Input Speed: 3,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Inline - Epicyclic - 160.0 x 135.0mm
Servo Gearbox 180Nm to 380Nm ratios 3:1 - 6:1. EHD16 Series.
Case: Steel. Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 18.86kg Backlash: 30'. Max Input Speed: 2,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Offset |
Gearboxes - Basic Inline and Offset
SRBI and SRBO Series.
|
Gearboxes - Offset - 58 x 46 x 24
FF10 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 0.226kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 60 x 60
Base mounted. SRBM60 Series.
Die cast aluminium Housing. Steel Shafts. Bearings Input / Output : Ball / Sintered Bronze. Steel and Phenolic Gears. Shaft Play Radial / Thrust : <= 0.1mm / <=0.3mm. Operating Temp : -10 to 60 Deg C | Approx weight : 26 grams.
|
Gearboxes - Offset - 80 x 64 x 32
FF15 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 0.55kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 117 x 100 x 48
FF20 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 1.9kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 175 x 150 x 60
FF30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight 5.5kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 236 x 190 x 90
FF40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 310 x 240 x 100
FF50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight 26.3kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Output Shafts |
Gearboxes - Output Shafts
For use in Cross Axis gearboxes with bores. P and PF Series.
Stainless 303 shaft. Steel keys and circlips. P-X and P-DX types suitable for P and PF type gearboxes (cross axis types).
|
Gearboxes - Power |
Gearboxes - Power - Mounting Feet
Optional mounting feet for power gearboxes.
Power gearboxes must be mounted firmly to the base because the power density is very high. The boxes can be mounyted using the 4 tapped holes in the unit. Optionally, these mounting feet can be used to provide more stability. Supplied in sets of 2 pieces with 4 screws.
|
Gearboxes - Power - Series FH
VP.FH Series.
Casing: Spheroidal graphite iron.
|
Gearboxes - Power - Series FL
VP.FL Series.
Casing: Spheroidal graphite iron.
|
Gearboxes - Power - Series H
VP.H Series.
Casing: Spheroidal graphite iron.
|
Gearboxes - Power - Series H Reinforced Design
VX.H Series.
Casing: Spheroidal graphite iron. 1:1 Ratio only.
|
Gearboxes - Power - Series L
VP.L Series.
Casing: Spheroidal graphite iron.
|
Gearboxes - Power - Series L Reinforced Design
VX.L Series.
Casing: Spheroidal graphite iron. 1:1 Ratio only.
|
Gearboxes - Right Angle |
Gearboxes - Right Angle - 30.0 x 30.0 x 18.0mm
Economy Bevel Gear Type. Miniature gearbox.
Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.
|
Gearboxes - Right Angle - 30.5 x 30.5 x 18.7mm
Bevel Gears - 1:1 Ratio. B332 Series. Miniature gearbox.
1:1 Ratio Only / 4mm Shafts. Min Torque 0.5 Ncm. Backlash Approx 2 Degrees. Approx Max Temperature 80 Deg C. Suitable for manual and short term drive application.
|
Gearboxes - Right Angle - 36.5 x 36.5 x 29.4mm
1:1 ratio. GDRA Series. Miniature gearbox.
|
Gearboxes - Right Angle - 40.0 x 40.0 x 20.0mm
Mitre Gears 1:1 ratio. GDRA Series. Miniature gearbox.
Max Speed 3000 RPM. Max Backlash 1 Degree. Ball bearings both ends. Base mounting both sides.
|
Gearboxes - Right Angle - 40.0 x 40.0 x 25.0mm
BLH20 Series. Miniature gearbox.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 40.0 x 40.0 x 25.0mm (B)
Economy Bevel Gear Type. GDRA Series. Miniature gearbox.
Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.
|
Gearboxes - Right Angle - 50.0 x 50.0 x 30.0mm
Economy Bevel Gear Type. GDRA Series.
Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.
|
Gearboxes - Right Angle - 55.0 x 55.0 x 34.0mm
BLH30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 60.0 x 60.0 x 30.0mm
Mitre Gears 1:1 ratio. GDRA Series.
Max Speed 3000 RPM. Max Backlash 1 Degree. Ball bearings both ends. Base mounting both sides.
|
Gearboxes - Right Angle - 62.5 x 50.8 x 30.0mm
Bevel Gears - Plastic Housing. GDLBP Series.
Max Backlash 5 Degrees.
|
Gearboxes - Right Angle - 63.0 x 63.0 x 40.0mm
Economy Bevel Gear Type. GDRABE Series.
Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.
|
Gearboxes - Right Angle - 75.0 x 44.0 x 44.0mm
Bevel Gears - 1.6 Nm-5.0 Nm ratios 6:1 to 24:1. BLN20 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 75.0 x 75.0 x 44.0mm
BLH40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 80.0 x 80.0 x 40.0mm
Mitre Gears 1:1 ratio. GDRA Series.
Max Speed 3000 RPM. Max Backlash 1 Degree. Ball bearings both ends. Base mounting both sides.
|
Gearboxes - Right Angle - 82.0 x 62.0 x 40.0mm
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit weight 0.4kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Right Angle - 85.5 x 77.8 x 31.8mm
Bevel Gears - Plastic Housing. GDLBP Series.
Max Backlash 5 Degrees.
|
Gearboxes - Right Angle - 87.0 x 66.0 x 60.0mm
1 : 1 ratio only. BL18 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV. Weight: 1.3kg.
|
Gearboxes - Right Angle - 98.0 x 60.0 x 60.0mm
Bevel Gears - 5 Nm-15 Nm ratios 6:1 to 24:1. BLN30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 100.0 x 100.0 x 60.0mm
BLH50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 125.0 x 125.0 x 80.0mm
BLH60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 132.0 x 80.0 x 80.0mm
Bevel Gears - 13 Nm-43 Nm ratios 6:1 to 24:1. BLN40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 140.0 x 107.0 x 66.0mm
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit Weight 1.8kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Right Angle - 140.0 x 140.0 x 98.0mm
BLH70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 166.0 x 128.0 x 76.0mm
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit Weight 3.1kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Right Angle - 190.0 x 120.0 x 120.0mm
Bevel Gears - 40.6 Nm-110 Nm ratios 6:1 to 24:1. BLN50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 245.0 x 160.0 x 160.0mm
Bevel Gears - 86 Nm-270 Nm ratios 6:1 to 24:1. BLN60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Right Angle - 300.0 x 200.0 x 200.0mm
Bevel Gears - 215 Nm-550 Nm ratios 6:1 to 24:1. BLN70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee |
Gearboxes - Tee - 36.5 x 36.5 x 29.4mm
GDRAB Series. Miniature gearbox.
|
Gearboxes - Tee - 38.9 x 38.1 x 27.0mm A
Worm Gear. WG11 Series. Miniature gearbox.
Maximum input speed 2000 RPM. Maximum Backlash 5 Degrees. Worm Gears.
|
Gearboxes - Tee - 38.9 x 38.1 x 27.0mm B
1:1, 2:1 and 3:1 ratios. GDRA Series. Miniature gearbox.
Max Speed 2000 RPM. Max Backlash 5 Degrees. Bevel Gears.
|
Gearboxes - Tee - 40.0 x 40.0 x 25.0mm
BLHT20 Series. Miniature gearbox.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 55.0 x 40.0 x 25.0mm
Bevel Gears - 0.53 to 1.77 Nm. BLHM20 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 55.0 x 55.0 x 34.0mm
BLHT30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 62.5 x 50.8 x 30.0mm
Bevel Gears - Plastic Housing. GDLBP Series.
Max Backlash 5 Degrees.
|
Gearboxes - Tee - 65.0 x 50.0 x 50.0mm
BL8 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 70.0 x 70.0mm
Lengths from 90 to 120mm. BL15 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 74.0 x 55.0 x 34.0mm
Bevel Gears - 1.32 to 4.40 Nm. BLHM30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 75.0 x 50.0 x 50.0mm
BL8 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 75.0 x 75.0 x 44.0mm
BLHT40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 80.0 x 60.0 x 50.0mm
BL8 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 82.0 x 74.0 x 40.0mm
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit Weight 0.5kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Tee - 85.5 x 77.8 x 31.8mm
Bevel Gears - Plastic Housing. GDLBP Series.
Max Backlash 5 Degrees.
|
Gearboxes - Tee - 100.0 x 75.0 x 44.0mm
Bevel Gears - 3.0 to 10.3 Nm. BLHM40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 100.0 x 100.0 x 60.0mm
BLHT50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 125.0 x 125.0 x 80.0mm
BLHT60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 135.0 x 100.0 x 60.0mm
Bevel Gears - 7.7 to 30.0 Nm. BLHM50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 140.0 x 132.0 x 66.0mm
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit Weight 2.2kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Tee - 140.0 x 140.0 x 98.0mm
BLHT70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 166.0 x 160.0 x 76.0mm
GDRHD Series.
Max Rated Speed 3600 RPM - Reversible / Unit Weight 3.4kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 Deg C.
|
Gearboxes - Tee - 170.0 x 125.0 x 80.0mm
Bevel Gears - 19.0 to 70.0 Nm. BLHM60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Gearboxes - Tee - 180.0 x 140.0 x 98.0mm
Bevel Gears - 26.0 to 128.0 Nm. BLHM70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
|
Geargrip Couplings |
Couplings - Geargrip
|
Gearhead Attaching Clamps |
Clamps - Gearhead Attaching
|
Gearheads - Bu-Ord |
Gearheads - Bu-Ord Size 8 - Heavy Duty
Ball bearings used throughout.
|
Gearheads - Bu-Ord Size 11
Ball bearings used throughout. Pat Nos 2892357 and 3396594.
|
Gearheads - Bu-Ord Size 11 - Heavy Duty
Ball bearings used throughout.
|
Gearheads - Bu-Ord Size 15
Ball bearings used throughout. Pat No 2892357.
|
Gearheads - Bu-Ord Size 15 - Heavy Duty
Ball bearings used throughout.
|
Gearheads - Bu-Ord Size 18
Ball bearings used throughout. Pat No 2892357.
|
Gearheads - Bu-Ord Size 18 - Heavy Duty
Ball bearings used throughout.
|
Gearheads - Inline |
Gearheads - Inline - 12 mm x Various Lengths
12mm Diameter - Suits 1mm Motor shaft.
Input and Output shafts have same centre line. Input and output in same direction. Requires 0.15 Module pinion as shown in tables. Suits 1mm Motor Shaft.
|
Gearheads - Inline - 16 mm x Various Lengths
16mm Diameter - Suits 1.5mm Motor Shaft.
Input and Output shafts have same centre line. Input and output in same direction. Requires 0.15 Module pinion as shown in tables. Suits 1.5mm Motor Shaft.
|
Gearheads - Inline - 20 x 21mm
20mm Diameter - Suits 2mm Motor Shaft.
Input and output in same direction. Requires 0.25 Module pinion as shown in tables. Suits 2mm Motor Shaft.
|
Gearheads - Inline - 22 mm x Various Lengths
22mm Diameter - Suits 2mm Motor Shaft.
Input and output in same direction. Requires 0.25 Module pinion as shown in tables. Suits 2mm Motor Shaft.
|
Gearheads - Inline - 27 x 21.6mm
27mm Diameter - Suits 2mm Motor Shaft.
Input and output in same direction. Requires 0.2 Module pinion as shown in tables. Suits 2mm Motor Shaft.
|
Gearheads - Inline - 37 mm x Various Lengths
37mm Diameter - Suits 2mm Motor Shaft.
Input and output in same direction. Requires 0.5 Module pinion as shown in tables. Suits 2mm Motor Shaft.
|
Gearheads - Inline - 42 x 31.5mm
42mm Diameter - Suits 3mm Motor Shaft.
Input and output in same direction. Requires 0.4 Module pinion as shown in tables. Suits 3mm Motor Shaft.
|
Gearheads - Inline - 42.5 x 11.3mm
42mm Diameter - Suits 2mm Motor Shaft.
Can be used as replacement gearheads for --- Gearmotors - DC - Size 42 Light Duty. Use with pinion gear GS0.30-10-0200B0200-BR-N (0.3 module). Suits 2mm Motor Shaft.
|
Gearheads - Inline - 43 mm Square x Various Lengths
43mm Square - Suits 4mm Motor Shaft.
Can be used as replacement gearheads for --- Gearmotors - DC - Size 43. Requires 0.6 Module pinion as shown in tables. Suits 4mm Motor Shaft.
|
Gearheads - Inline - 48 mm Square x 28.2mm
48mm Square - Suits 3mm Motor Shaft.
Can be used as replacement gearheads for --- Gearmotors - DC - Size 48. Requires 0.4 Module pinion as shown in tables. Suits 3mm Motor Shaft.
|
Gearheads - Inline - 50 x 30mm
Drilled and Tapped to suit your motor register.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: J51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 50 x 40mm
Drilled and Tapped to suit your motor register.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 50 x 40mm Hi Torque
Drilled and Tapped to suit your motor register.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: JHD51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 50 x 50mm
Drilled and Tapped to suit your motor register.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 60 mm Square x 36.2mm
60mm Square - Suits 4mm Motor Shaft.
Can be used as replacement gearheads for --- Gearmotors - DC - Size 60 (D33S52M and D33S57M54 series). Requires 0.5 Module pinion as shown in tables. Suits 4mm Motor Shaft.
|
Gearheads - Inline - 60 mm Square x Various Lengths
60mm Square - Suits 4mm Motor Shaft.
Can be used as replacement gearheads for --- Gearmotors - A.C. Single Phase - Size 60. Can be used as replacement gearheads for --- Gearmotors - DC - Size 60 (D33S54M Series). Requires 0.5 Module pinion as shown in tables. Suits 4mm Motor Shaft.
|
Gearheads - Inline - 60 x 56mm
Drilled and Tapped to suit your motor register.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 60 x 70mm
Drilled and Tapped to suit your motor register.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 60 x 84mm
Drilled and Tapped to suit your motor register.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 63 x 40mm
Drilled and Tapped to suit your motor register.
End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 63 x 50mm
Drilled and Tapped to suit your motor register.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 63 x 60mm
Drilled and Tapped to suit your motor register.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 90 x 74mm
Drilled and Tapped to suit your motor register.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 90 x 94mm
Drilled and Tapped to suit your motor register.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 114 x 90mm
Drilled and Tapped to suit your motor register.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 120 x 120mm
Drilled and Tapped to suit your motor register.
Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - Planetary - Size 17 - Precision
Use with NEMA Size 17 Motors.
Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 17 - Standard
Use with NEMA Size 17 Motors.
Anodised aluminium housing - Heat Treated Steel Gears - Sealed ball bearings. Shaft loading 8.9kg (20 lbs) radial and 61kg (138 lbs) axial at 250rpm Output / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 23 - Adapted
With Nema and Non Nema Size Adaptors.
Anodised aluminium housing - Heat Treated Steel Gears - Sealed ball bearings. Shaft loading 26kg (60 lbs) radial and 64kg (145 lbs) axial at 250rpm Output / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 23 - Economy
Use with NEMA Size 23 Motors.
Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium Flanges. Shaft loading 66kg (150 lbs) radial and 66kg (150 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 23 - Precision
Use with NEMA Size 23 Motors.
Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 154kg (347 lbs) radial and 153kg (344 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 34 - Adapted
With Nema and Non Nema Size Adaptors.
Anodised aluminium housing - Heat Treated Steel Gears - Sealed ball bearings. Shaft loading 44kg (100 lbs) radial and 88kg (200 lbs) axial at 250 rpm output / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 34 - Economy
Use with NEMA Size 34 Motors.
Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 132kg (300 lbs) radial and 132kg (300 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 34 - Precision
Use with NEMA Size 34 Motors.
Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 388kg (875 lbs) radial and 376kg (849 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 42 - Adapted
With Nema and Non Nema Size Adaptors.
Anodised aluminium housing - Heat Treated Steel Gears - Sealed ball bearings. Shaft loading 53kg (120 lbs) radial and 120kg (270 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 56 - Economy
Use with NEMA Size 56 Motors.
Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 446kg (1000 lbs) radial and 446kg (1000 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 56 - Precision
Use with NEMA Size 56 Motors.
Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 937kg (2100 lbs) radial and 937kg (2100 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 60 - Adapted
With Nema and Non Nema Size Adaptors.
Maximum input speed 4000 rpm. Shaft loading 41kg (92 lbs) radial and 197kg (442 lbs) axial at 250rpm output. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 8 arc min, Double Stage : 9 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 90 - Adapted
With Nema and Non Nema Size Adaptors.
Maximum input speed 4000 rpm. Shaft loading 53kg (120 lbs) radial and 289kg (648 lbs) axial at 250rpm output. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 8 arc min, Double Stage : 9 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F).
|
Gearheads - Inline - Planetary - Size 115 - Adapted
With Nema and Non Nema Size Adaptors.
Maximum input speed 4000 rpm. Shaft loading 82kg (184 lbs) radial and 526kg (1180 lbs) axial at 250rpm output. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 8 arc min, Double Stage : 9 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F).
|
Gearheads - Inline - Spur Gear - Size 23
Use with NEMA Size 23 Motors.
Steel Housing - Aluminium Flanges - Stainless Steel Heat Treated Gears - Ball Bearings. Double Stage / Max 5000 RPM Input Speed. Continuous Torque 6.65 N.m (50 lb.in) / Peak Torque 13.3 N.m (100 lb.in). Min Efficiency 90% / Max. Backlash 20 min.
|
Gearheads - Inline - Spur Gear - Size 34
Use with NEMA Size 34 Motors.
Steel Housing - Aluminium Flanges - Stainless Steel Heat Treated Gears - Ball Bearings. Double Stage / Max 5000 RPM Input Speed. Continuous Torque 28.2 N.m (250 lb.in) / Peak Torque 56.5 N.m (500 lb.in). Min Efficiency 90% / Max. Backlash 20 min.
|
Gearheads - Inline - Spur Gear - Size 42
Use with NEMA Size 42 Motors.
Steel Housing - Aluminium Flanges - Stainless Steel Heat Treated Gears - Ball Bearings. Double Stage / Max 5000 RPM Input Speed. Continuous Torque 56 N.m (500 lb.in) / Peak Torque 113 N.m (1000 lb.in). Min Efficiency 90% / Max. Backlash 20 min.
|
Gearheads - Inline - Spur Gear - Size 56
Use with NEMA Size 56 Motors.
Steel Housing - Aluminium Flanges - Stainless Steel Heat Treated Gears - Ball Bearings. Double Stage / Max 5000 RPM Input Speed. Continuous Torque 135 N.m (1200 lb.in) / Peak Torque 270 N.m (2400 lb.in). Min Efficiency 90% / Max. Backlash 20 min.
|
Gearheads - Ondrive Max Series |
Gearheads - Ondrives - MAX 13
Use with Motors - DC - Ondrives - Max series.
13mm planetary steel gearhead supplied with fitting kit to suit Size 13 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 1 Stage = 8N, 2 Stage = 12N, 3 Stage = 16N, 4 Stage = 20N, 5 Stage = 20N. Operating Temperature Range: -15°C to +100°C, Mass: 11-23g. Usable output torque depends on torque from motor.
|
Gearheads - Ondrives - MAX 16
Use with Motors - DC - Ondrives - Max series.
16mm planetary steel gearhead supplied with fitting kit to suit Size 16 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 2 Stage = 15N, 5 Stage = 20N. Operating Temperature Range: -15°C to +65°C, Mass: 23-35g. Usable output torque depends on torque from motor.
|
Gearheads - Ondrives - MAX 22
Use with Motors - DC - Ondrives - Max series.
22mm planetary steel gearhead supplied with fitting kit to suit Size 22 motors, sleeve bearing output. Maximum Axial Load: 100N. Maximum Radial Load at 10mm from Flange: 70N. Operating Temperature Range: -15°C to +80°C, Mass: 55-94g. Usable output torque depends on torque from motor.
|
Gearheads - Ondrives - MAX 32
Use with Motors - DC - Ondrives - Max series.
32mm planetary steel gearhead supplied with fitting kit to suit Size 32 motors, sleeve bearing output. Maximum Axial Load: 120N. Maximum Radial Load at 12mm from Flange: 140N. Operating Temperature Range: -15°C to +80°C, Mass: 118-226g. Usable output torque depends on torque from motor.
|
Gearheads - Ondrives - MAX 40
Use with Motors - DC - Ondrives - Max series.
38mm spur steel gearhead supplied with fitting kit to suit Size 40 motors, sleeve bearing output. Maximum Axial Load: 30N. Maximum Radial Load at 5mm from Bearing: 50N. Operating Temperature Range: -5°C to +65°C, Mass: 60-75g. Usable output torque depends on torque from motor.
|
Gearheads - Right Angle |
Gearheads - Right Angle - Planetary - Size 17
Use with NEMA Size 17 Motors.
Maximum input speed 5000 rpm. Shaft loading 25.4 kg (57 lbs) radial and 24.5 kg (55 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Right Angle - Planetary - Size 23 - Adapted
With Nema and Non Nema Size Adaptors.
Maximum input speed 5000 rpm. Shaft loading 26.8 kg (60 lbs) radial and 66.9 kg at 250rpm output (150 lbs) axial. Min. Efficiency ---- Single Stage : 95%, Double Stage : 90%, Triple Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min, Triple Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F).
|
Gearheads - Right Angle - Planetary - Size 23 - Economy
Use with NEMA Size 23 Motors.
Maximum input speed 4000 rpm. Shaft loading 154.9 kg (347 lbs) radial and 153.5 kg (344 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 14 arc min, Double Stage : 18 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Right Angle - Planetary - Size 23 - Precision
Use with NEMA Size 23 Motors.
Maximum input speed 5000 rpm. Shaft loading 154.9 kg (347 lbs) radial and 153.5 kg (344 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 14 arc min, Double Stage : 18 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Right Angle - Planetary - Size 34 - Adapted
With Nema and Non Nema Size Adaptors.
Maximum input speed 5000 rpm. Shaft loading 45 kg (100 lbs) radial and 90 kg (200 lbs) axial. Min. Efficiency ---- Single Stage : 95%, Double Stage : 90%, Triple Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min, Triple Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F).
|
Gearheads - Right Angle - Planetary - Size 42 - Adapted
With Nema and Non Nema Size Adaptors.
Maximum input speed 5000 rpm. Shaft loading 54 kg (120 lbs) radial and 121 kg (270 lbs) axial. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 13 arc min, Double Stage : 15 arc min. Operating Temperature : -34 to 121 Deg C (-29 to 250 Deg F).
|
Gearheads - Right Angle - Planetary - Size 56 - Economy
Use with NEMA Size 56 Motors.
Maximum input speed 4000 rpm. Shaft loading 276 kg (620 lbs) radial and 276 kg (620 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 14 arc min, Double Stage : 18 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
Gearheads - Right Angle - Planetary - Size 56 - Precision
Use with NEMA Size 56 Motors.
Maximum input speed 5000 rpm. Shaft loading 937 kg (2100 lbs) radial and 937 kg (2100 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
|
|
|
