80t Single Speed Penn Parts Categories


Category Matches

Fishing Reel Parts

TopHide Pictures

80T Single Speed Penn Parts
80T Single Speed Penn Parts

Search Rating: 49%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of 80T Single Speed Penn Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 80T Single Speed Penn Parts.

Universal Joints Single

TopHide Pictures

Universal Joints - Single Joint - High Speed - Bored and Keyed
Universal Joints - Single Joint - High Speed - Bored and Keyed

Search Rating: 46%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. With keyway. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Universal Joints - Single Joint - High Speed - Bored and Keyed.

Universal Joints - Single Joint - High Speed - Plain Bore
Universal Joints - Single Joint - High Speed - Plain Bore

Search Rating: 46%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Universal Joints - Single Joint - High Speed - Plain Bore.

Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless

Search Rating: 46%

Also see combined categories:
All Universal Joints
All Single Joint Universals

303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Universal Joints - Single Joint - High Speed - Plain Bore - Stainless.

Universal Joints - Single Joint - High Speed - Solid
Universal Joints - Single Joint - High Speed - Solid

Search Rating: 46%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Unbored. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Universal Joints - Single Joint - High Speed - Solid.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - High Speed Cage
Bearings - Ball - High Speed Cage

Search Rating: 46%

Also see combined categories:
All Radial Ball Bearings

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - High Speed Cage.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Single Row - with Glass Balls
Bearings - Acetal - Single Row - with Glass Balls

Search Rating: 44%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with Glass Balls.

Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Search Rating: 44%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Search Rating: 44%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls.

Universal Joints Single

TopHide Pictures

Universal Joints - Single Joint - Hobby
Universal Joints - Single Joint - Hobby

Search Rating: 44%

Also see combined categories:
All Universal Joints
All Single Joint Universals

C45 Carbon Steel. Maximum operating angle 30 degree. Slow speed only.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Universal Joints - Single Joint - Hobby.

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - Semi-Ground - Sealed
Bearings - Ball - Semi-Ground - Sealed

Search Rating: 41%

Also see combined categories:
All Radial Ball Bearings

Radial ball bearings. This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Semi-Ground - Sealed.

Bearings - Ball - Semi-Ground - Shielded
Bearings - Ball - Semi-Ground - Shielded

Search Rating: 41%

Also see combined categories:
All Radial Ball Bearings

Radial ball bearings. This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Semi-Ground - Shielded.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Oldham - Hubs - Clamp Style
Couplings - Oldham - Hubs - Clamp Style

Search Rating: 37%

Also see combined categories:
All Insert and Jaw Type Couplings
All Oldham Hubs

0.06 to 44 Nm. Max Speed: 3000 RPM.

Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Oldham - Hubs - Clamp Style.

Bearings Conveyor

TopHide Pictures

Bearings - Conveyor - Hex Bore - Plastic - Single Row
Bearings - Conveyor - Hex Bore - Plastic - Single Row

Search Rating: 36%

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Conveyor - Hex Bore - Plastic - Single Row.

Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row
Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row

Search Rating: 35%

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row.

Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Search Rating: 32%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Open.

Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Search Rating: 29%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed.

Gearheads Inline

TopHide Pictures

Gearheads - Inline - Planetary - Size 17 - Precision
Gearheads - Inline - Planetary - Size  17 - Precision

Search Rating: 28%

Also see combined categories:
All Inline Planetary Gearheads

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearheads - Inline - Planetary - Size 17 - Precision.

Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Search Rating: 28%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded.

Dental Handpiece Parts

TopHide Pictures

True Speed DME Parts
True Speed DME Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of True Speed DME Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of True Speed DME Parts.

High Speed Handpiece Impact-Air Parts
High Speed Handpiece Impact-Air Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of High Speed Handpiece Impact-Air Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of High Speed Handpiece Impact-Air Parts.

Slow Speed 40000 RPM Beaver Parts
Slow Speed 40000 RPM Beaver Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slow Speed 40000 RPM Beaver Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Slow Speed 40000 RPM Beaver Parts.

282A Slow Speed Kavo Parts
282A Slow Speed Kavo Parts

Search Rating: 27%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of 282A Slow Speed Kavo Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 282A Slow Speed Kavo Parts.

NPB Slow Speed NSK Parts
NPB Slow Speed NSK Parts

Search Rating: 27%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of NPB Slow Speed NSK Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of NPB Slow Speed NSK Parts.

E4R Slow Speed - Contra Angle Green Band NSK Parts
E4R Slow Speed - Contra Angle Green Band NSK Parts

Search Rating: 27%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of E4R Slow Speed - Contra Angle Green Band NSK Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of E4R Slow Speed - Contra Angle Green Band NSK Parts.

Tools Threading

TopHide Pictures

Tools - Dies - High Speed Steel
Tools - Dies - High Speed Steel

Search Rating: 26%

Also see combined categories:
All Dies
All Tools

High Speed Steel Button Dies


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Dies - High Speed Steel. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Dies - High Speed Steel.

Tools - Taps - High Speed Steel - Extension
Tools - Taps - High Speed Steel - Extension

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Intermediate small shank spiral point extension taps 150mm long


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Extension.

Tools - Taps - High Speed Steel - Hand
Tools - Taps - High Speed Steel - Hand

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

High Speed Steel Short Machine Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

High Speed Steel (HSS) Short Machine taps.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Hand.

Tools - Taps - High Speed Steel - Hand - Sets
Tools - Taps - High Speed Steel - Hand - Sets

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set

High Speed Steel (HSS) Short Machine taps.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Hand - Sets.

Tools - Taps - High Speed Steel - Helicoil
Tools - Taps - High Speed Steel - Helicoil

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Helicoil.

Tools - Taps - High Speed Steel - NPT Pipe
Tools - Taps - High Speed Steel - NPT Pipe

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Taper Pipe Taps


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - NPT Pipe.

Tools - Taps - High Speed Steel - NPT Pipe - Interrupted
Tools - Taps - High Speed Steel - NPT Pipe - Interrupted

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Taper Pipe Taps


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - NPT Pipe - Interrupted.

Tools - Taps - High Speed Steel - Spiral Flute
Tools - Taps - High Speed Steel - Spiral Flute

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Metric spiral flute taps. Ground thread. 50o helix.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Spiral Flute.

Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide
Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. 37o helix.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide.

Tools - Taps - High Speed Steel - Spiral Point
Tools - Taps - High Speed Steel - Spiral Point

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Metric intermediate ground thread high speed steel taps. Also called gun taps.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Spiral Point.

Tools - Taps - High Speed Steel - Spiral Point - Premium
Tools - Taps - High Speed Steel - Spiral Point - Premium

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Premium spiral point intermediate taps in UNC and UNF. Also called gun taps.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Spiral Point - Premium.

Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide
Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide

Search Rating: 26%

Also see combined categories:
All Taps
All Tools

Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. Also called gun taps.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide.

Motors DC

TopHide Pictures

Motors - DC 36.0X71.0 mm
Motors - DC 36.0X71.0 mm

Search Rating: 25%

Also see combined categories:
All DC Motors

High power, high speed 11,800 RPM unloaded at 12 volts

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Motors - DC 36.0X71.0 mm.

Shafting General Purpose

TopHide Pictures

Rod - Drill Blanks
Rod - Drill Blanks

Search Rating: 25%

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill Blanks.

Couplings Sleeve

TopHide Pictures

Couplings - Sleeve Type - Hubs
Couplings - Sleeve Type - Hubs

Search Rating: 25%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Sleeve Type - Hubs.

Couplings - Sleeve Type - Sleeves
Couplings - Sleeve Type - Sleeves

Search Rating: 25%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Sleeve Type - Sleeves.

Bearings and Housings Insert

TopHide Pictures

Housings - Bearing - Flanged - 2 Bolt Hole - Plastic
Housings - Bearing - Flanged - 2 Bolt Hole - Plastic

Search Rating: 24%

Load and speed capability depend on the bearing used. Use with steel or plastic bearing inserts for plastic housings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Flanged - 2 Bolt Hole - Plastic.

Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic
Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic

Search Rating: 24%

Load and speed capability depend on the bearing used. Use with steel bearing inserts for plastic housings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic.

Bearings PEEK

TopHide Pictures

Bearings - Peek - with Glass Balls
Bearings - Peek - with Glass Balls

Search Rating: 24%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from PEEK - Balls made from Ground Glass - Cages from Acetal or Nylon.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Peek - with Glass Balls.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Double Row - with Glass Balls
Bearings - Acetal - Double Row - with Glass Balls

Search Rating: 24%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Double Row - with Glass Balls.

Bearings Ceramic

TopHide Pictures

Bearings - Ceramic Si3N4 - Radial
Bearings - Ceramic Si3N4 - Radial

Search Rating: 24%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ceramic Si3N4 - Radial.

Belts Poly Vee

TopHide Pictures

Belts - Poly V - J Section
Belts - Poly V - J Section

Search Rating: 24%

Also see combined categories:
All Posi-Drive Belts

Poly V are ideal for high ratio and high speed drives. J Section is 2.34mm pitch and 3.56mm belt height.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Poly V - J Section.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Oldham - Disks for Clamp Style
Couplings - Oldham - Disks for Clamp Style

Search Rating: 24%

Also see combined categories:
All Insert and Jaw Type Couplings
All Oldham Disks

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Oldham - Disks for Clamp Style.

Bearings Ceramic

TopHide Pictures

Bearings - Ceramic Si3N4 - Angular Contact
Bearings - Ceramic Si3N4 - Angular Contact

Search Rating: 24%

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ceramic Si3N4 - Angular Contact.

Bushes Plastic

TopHide Pictures

Bushes - Plastic - Iglidur Z - Flanged
Bushes - Plastic - Iglidur Z - Flanged

Search Rating: 24%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

High temperature. High thermal resistance. Extreme load. High surface speed.

Specific Gravity 1.40 g/cm3. Operating Temp 310 C short term / 250 C long term. Tensile Strength at 20 oC = 95 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is F10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Iglidur Z - Flanged.

Bushes - Plastic - Iglidur Z - Unflanged
Bushes - Plastic - Iglidur Z - Unflanged

Search Rating: 24%

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

High temperature. High thermal resistance. Extreme load. High surface speed.

Specific Gravity 1.40 g/cm3. Operating Temp 310 C short term / 250 C long term. Tensile Strength at 20 oC = 95 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is F10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Iglidur Z - Unflanged.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Oldham - Complete - Acetal Disk - Set Screw
Couplings - Oldham - Complete - Acetal Disk - Set Screw

Search Rating: 24%

Also see combined categories:
All Insert and Jaw Type Couplings

0.06 to 44 Nm. Max Speed: 3000 RPM.

Max Speed: 3000 RPM. Parallel out of line compensation. Temp Range -20 oC to +60 oC. Oldham couplings are designed to transfer torque between two parallel, but not colinear, shafts. They have three discs, one coupled to the input, one coupled to the output, and a centre disc that is joined to the first two by tongue and grooves. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Couplings - Oldham - Complete - Acetal Disk - Set Screw.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Search Rating: 24%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls.

Bearings Ceramic

TopHide Pictures

Bearings - Ceramic ZrO2 - Radial
Bearings - Ceramic ZrO2 - Radial

Search Rating: 24%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ceramic ZrO2 - Radial.

Bushes Bronze

TopHide Pictures

Bushes - Bronze - Sintered - Unflanged
Bushes - Bronze - Sintered - Unflanged

Search Rating: 24%

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Oil impregnated sintered bronze bushes.

Precision items show an allowable Load Speed Rating in Newtons times RPM.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Bronze - Sintered - Unflanged.

Bushes Plastic

TopHide Pictures

Bushes - Plastic - Rulon J - Flanged
Bushes - Plastic - Rulon J - Flanged

Search Rating: 24%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)

Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Rulon J - Flanged.

Bushes - Plastic - Rulon J - Unflanged
Bushes - Plastic - Rulon J - Unflanged

Search Rating: 24%

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)

Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Plastic - Rulon J - Unflanged.

Gearboxes Inline

TopHide Pictures

Gearboxes - Inline - 112.0 x 52.0 Low Backlash
Gearboxes - Inline - 112.0 x  52.0 Low Backlash

Search Rating: 24%

Also see combined categories:
All Inline Gearboxes

Taper Gears - Weight: 1.50kg. TG112 Series.

Case: Anodised Aluminum 6082. Taper Gears: 817M40T High Carbon Steel. Weight: 1.50kg. Output Backlash: Less than 8.1 arc/min at output. Max Input Speed: 3000 Rpm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Inline - 112.0 x 52.0 Low Backlash.

Universal Joints Double

TopHide Pictures

Universal Joints - Double Joint - Hobby
Universal Joints - Double Joint - Hobby

Search Rating: 24%

Also see combined categories:
All Universal Joints
All Double Joint Universals

C45 Carbon Steel. Maximum operating angle 60 degree. Slow speed only.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Universal Joints - Double Joint - Hobby.

Bushes Bronze

TopHide Pictures

Bushes - Bronze - Sintered - Flanged
Bushes - Bronze - Sintered - Flanged

Search Rating: 24%

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Oil impregnated flanged sintered bronze bushes.

Precision items show an allowable Load Speed Rating in Newtons times RPM.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Bronze - Sintered - Flanged.

Pulleys Poly Vee

TopHide Pictures

Pulleys - Poly V - J Section - Through Bored
Pulleys - Poly V - J Section - Through Bored

Search Rating: 23%

Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pulleys - Poly V - J Section - Through Bored.

Plungers Spring

TopHide Pictures

Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose
Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose

Search Rating: 23%

Also see combined categories:
All Threaded Spring Plungers

Over 10 million cycles. Built to take the tough abuse of high speed, long run, stamping operations. Ideal for use as parts lifters in dies, or other applications requiring exceptional long life.

Special long life springs. Black oxide finished bodies. Nylon locking element. Not recommended for use in aluminium applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose.

Bearings Ceramic

TopHide Pictures

Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Search Rating: 23%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row.

Bearings and Housings Insert

TopHide Pictures

Housings - Bearing - Pillow Block - Plastic
Housings - Bearing - Pillow Block - Plastic

Search Rating: 23%

Use with steel or plastic bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Pillow Block - Plastic.

Linear Slides

TopHide Pictures

Slides - Linear - Clean Room
Slides - Linear - Clean Room

Search Rating: 22%

Also see combined categories:
All Linear Slides

Stainless Steel throughout (similar to 440C). Speed: 0.5 m/sec (30 m/min). Temperature: +100oC (Continuous), +140oC (Maximum). Life will be less than normal at +100oC and dimensions may change. Lateral Loading: Dynamic x 1.13 C - Static x 1.19 Co. Precision Linear Slide Unit is a compact linear motion rolling guide for limited stroke length.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Slides - Linear - Clean Room.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 123430 products in 2839 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.